Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
7GDS288474R0000 ABB 288474 IP41 Shield GT
ABB 288474 IP41 Shield, order code 7GDS288474R0000, is a GT product group protective shield accessory designated for compatible electrical distribution and switchgear assemblies requiring the specified IP41 shielding arrangement.
£19.80
Why Choose the ABB 288474 IP41 Shield?
The ABB 288474, manufacturer order code 7GDS288474R0000, is a specialist IP41 shield accessory from the ABB GT product group. Identified by the manufacturer designation 288474 IP41 SHIELD, this component is intended for compatible electrical distribution and switchgear assemblies where the specified protective shield is required.
Protective shields form an important part of electrical equipment construction, helping provide a physical barrier between designated equipment areas and their surroundings. The ABB 288474 IP41 Shield is identified for an IP41 protection arrangement, making it relevant to compatible assemblies designed to meet the corresponding enclosure protection requirements.
The ABB 288474 provides electrical contractors, switchboard manufacturers and maintenance engineers with a manufacturer-identified accessory for professional electrical assembly, refurbishment and replacement applications. Its dedicated ABB order code 7GDS288474R0000 supports accurate component identification when the specified IP41 shield is required.
Key Advantages
- Genuine ABB IP41 shield accessory for compatible electrical equipment.
- Part of the ABB GT product group.
- IP41 designation identifies the intended protection arrangement.
- Provides a dedicated protective shield component for the manufacturer-specified assembly.
- Supports the construction and maintenance of compatible electrical distribution equipment.
- Helps maintain the intended physical covering arrangement when correctly installed.
- Suitable for professional switchboard assembly and equipment servicing applications.
- Provides a manufacturer-specific replacement option for compatible installations.
- ABB order code 7GDS288474R0000 enables accurate product identification and procurement.
Key Features
- ABB GT product group.
- ABB 288474 IP41 Shield.
- ABB order code 7GDS288474R0000.
- Manufacturer designation: 288474 IP41 SHIELD.
- IP41 protection designation.
- Dedicated protective shield accessory for compatible electrical assemblies.
- Intended for use with the corresponding manufacturer-specified equipment arrangement.
- Supports physical separation and covering within the applicable assembly design.
- Suitable for professional electrical distribution and switchgear applications.
- Manufacturer-specific identification for accurate replacement part selection.
Technical Specifications
- Manufacturer: ABB
- Product group: GT
- Model: 288474
- Product designation: 288474 IP41 SHIELD
- Manufacturer order code: 7GDS288474R0000
- Product type: IP41 shield
- Product category: Electrical switchgear and distribution assembly accessories
- Protection designation: IP41
- IP classification reference: IEC 60529
- First IP digit: 4
- Second IP digit: 1
- Component function: Protective shielding within a compatible electrical assembly
- Equipment compatibility: Manufacturer-specified ABB electrical assemblies
- Product group reference: ABB GT
- Application: Electrical distribution equipment shielding, assembly and replacement
- Manufacturer identification: ABB 288474 / 7GDS288474R0000
Understanding IP41 Shielding for Electrical Distribution Equipment
Electrical distribution assemblies often incorporate protective covers and shields to help separate electrical components from accessible areas and external influences. The selection of these accessories must correspond to the intended enclosure design, equipment configuration and required degree of protection.
The ABB 288474 IP41 Shield is identified by an IP41 designation. Under the IEC 60529 ingress protection classification system, the first digit 4 indicates protection against access with a wire and against solid foreign objects of 1 mm diameter or greater. The second digit 1 indicates protection against vertically falling water drops.
The IP41 designation is relevant to the intended protective arrangement, but the shield should not be treated as an independently IP41-rated enclosure. The actual degree of protection achieved depends on the complete electrical assembly, including its enclosure construction, openings, seals, mounting arrangements and correct installation of all associated components.
The ABB 288474 is intended for use where the manufacturer specifies this particular shield. Correct selection helps ensure that the installed component corresponds to the designated electrical equipment arrangement. Installers should verify the applicable equipment model, fixing requirements and assembly instructions before fitting the shield.
The supplied product designation does not specify the shield's dimensions, material, colour, thickness, mounting method or compatible equipment models. These characteristics should be confirmed against ABB technical documentation before ordering for an installation where they are critical. The completed electrical assembly must maintain its required protection against electric shock and environmental influences.
Typical Applications
- Compatible ABB electrical distribution assemblies.
- Electrical switchgear requiring the specified IP41 shield.
- Protective shielding within manufacturer-designated equipment configurations.
- Industrial electrical distribution equipment.
- Commercial electrical switchboard installations.
- Electrical panel construction and equipment integration.
- Maintenance of compatible protective covering arrangements.
- Switchboard refurbishment and equipment upgrades.
- Replacement of manufacturer-specified ABB IP41 shield components.
Frequently Asked Questions
What is the ABB 288474 IP41 Shield used for?
The ABB 288474 is a protective shield accessory intended for compatible electrical distribution and switchgear assemblies. It is identified by the manufacturer as an IP41 Shield and is used where this specific protective component is required.
What does IP41 mean on the ABB 288474 Shield?
IP41 is an ingress protection designation defined under IEC 60529. The first digit indicates protection against access with a wire and solid foreign objects of 1 mm diameter or greater, while the second digit indicates protection against vertically falling water drops. The completed assembly must be correctly designed and installed to achieve its specified protection rating.
Does the ABB 288474 Shield make any enclosure IP41-rated?
No. The ABB 288474 IP41 Shield is a manufacturer-specific component and does not independently establish the ingress protection rating of an enclosure. The protection achieved depends on the complete compatible assembly and correct installation.
Which ABB product group does the 288474 belong to?
The ABB 288474 belongs to the ABB GT product group. Compatibility with a particular switchboard or electrical distribution assembly should be confirmed using the applicable ABB technical documentation.
What is the ABB order code for the 288474 IP41 Shield?
The manufacturer order code is 7GDS288474R0000. This identifies the ABB 288474 IP41 SHIELD within the ABB GT product group.
Trusted ABB Electrical Distribution and Protective Shield Accessories
ABB electrical distribution accessories provide switchboard manufacturers, electrical contractors and maintenance professionals with manufacturer-identified components for compatible equipment assemblies. The ABB 288474 IP41 Shield, order code 7GDS288474R0000, offers a dedicated protective shielding component for professional electrical distribution construction, maintenance and replacement applications.
