Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
7GDS288354R0000 ABB 288354 L-Profile (Control Centre) -2000
ABB 288354 L-Profile (Control Centre) -2000 (7GDS288354R0000) is an L-shaped structural profile component from the ABB GT product group intended for designated mechanical construction, mounting and positioning arrangements within compatible industrial electrical control centre assemblies.
£852.16
Why Choose the ABB 288354 L-Profile (Control Centre) -2000?
The ABB 288354 L-Profile (Control Centre) -2000, manufacturer order code 7GDS288354R0000, is a specialised L-shaped structural profile component identified for use in compatible industrial electrical control centre assemblies. Listed within the ABB GT product group, this component is associated with the mechanical construction, structural positioning and mounting arrangements of electrical control and switchgear equipment.
Industrial electrical control centres depend on accurately positioned structural components to accommodate electrical apparatus, internal mounting systems, mechanical assemblies and associated equipment. L-shaped profiles are commonly incorporated into electrical enclosure construction because their angular cross-section provides surfaces for supporting, locating or fixing compatible components. The ABB 288354 is intended for installations where this particular manufacturer profile is specified in the approved equipment design.
The product designation includes the reference -2000, which forms part of the manufacturer's supplied description. Although this reference may identify a particular dimensional or assembly configuration, the available specification does not explicitly establish its meaning. Any interpretation of the reference as a physical length must therefore be confirmed against the applicable ABB technical documentation.
As a dedicated ABB control centre structural component, the 288354 L-Profile supports original equipment construction, maintenance and refurbishment of compatible electrical assemblies. Its unique ABB order code provides a reliable means of identifying the required component for procurement and replacement, helping electrical panel builders and maintenance engineers preserve the intended mechanical arrangement of their equipment.
Key Advantages
- Purpose-specific L-profile component for compatible ABB control centre assemblies.
- Supports the designated mechanical construction of industrial electrical control equipment.
- Provides an angular profile configuration for manufacturer-specified structural and mounting arrangements.
- Helps maintain the intended positioning and alignment of associated assembly components.
- Suitable for integration into specified ABB industrial electrical switchgear systems.
- Supports structured electrical panel construction and original equipment manufacturing.
- Dedicated ABB manufacturer identification simplifies component selection and procurement.
- Suitable for maintenance, refurbishment and manufacturer-specified replacement applications.
- Provides the designated component where ABB product number 288354 is required.
- Supports the preservation of manufacturer-defined control centre assembly arrangements.
Key Features
- ABB GT product group component.
- Product designation: 288354 L-Profile (Control Centre) -2000.
- ABB order code: 7GDS288354R0000.
- L-shaped structural profile configuration.
- Identified for industrial electrical control centre applications.
- Associated with mechanical construction and mounting arrangements within compatible electrical assemblies.
- Intended for integration into designated ABB control centre structures.
- Supports original equipment assembly and manufacturer-specified component replacement.
- Part-specific identification for accurate maintenance and procurement.
- Requires installation according to the applicable ABB equipment drawings and assembly instructions.
Reliable Structural Integration for Industrial Control Centre Assemblies
Industrial electrical control centres are assembled from coordinated mechanical and electrical components designed to accommodate switching, protection, control and power distribution equipment. Structural profiles form part of the physical construction of these assemblies and may be used to position, support or connect associated equipment components according to the manufacturer's design.
The ABB 288354 L-Profile (Control Centre) -2000 is intended to form part of a designated profile arrangement within compatible ABB control centre equipment. Its L-shaped configuration identifies it as an angular structural component associated with the mechanical organisation of the assembly.
The correct installation of structural profiles is important for maintaining the specified equipment geometry, mounting alignment and mechanical clearances. Depending on the complete assembly design, profiles may interact with brackets, panels, frames, mounting rails or other supporting components. The precise function of the ABB 288354 must be established from the relevant ABB engineering drawings rather than inferred solely from its general designation.
The performance of a profile assembly depends on several factors, including material properties, cross-sectional dimensions, fixing methods, mechanical loading and the condition of adjacent supporting structures. Using an incorrectly specified profile may affect equipment alignment, mounting stability or the intended mechanical configuration of the control centre.
The supplied manufacturer description does not independently establish the ABB 288354 profile's physical length, material grade, surface treatment, load-bearing capacity, mounting-hole arrangement or dimensional tolerances. In particular, the -2000 reference should not be interpreted as a confirmed length of 2000 mm without supporting manufacturer documentation.
For dependable installation, the ABB 288354 should only be used in equipment configurations specifying this component. Installation and replacement should follow the applicable ABB assembly drawings, with the mounting orientation, fixing arrangements, clearances and compatibility checked before the electrical equipment is returned to service.
Typical Applications
- Industrial electrical control centre assemblies.
- Compatible ABB control centre structural arrangements.
- Electrical switchgear mechanical construction.
- Industrial electrical enclosure and control panel assembly.
- Internal equipment mounting and positioning arrangements.
- Motor control centre structural assemblies where specified.
- Electrical power distribution equipment construction.
- Original equipment manufacturing and electrical panel building.
- Maintenance and refurbishment of compatible control centre equipment.
- Replacement of specified ABB L-profile structural components.
Technical Specifications
| Product group | GT |
|---|---|
| Product designation | 288354 L-Profile (Control Centre) -2000 |
| Product number | 288354 |
| ABB order code | 7GDS288354R0000 |
| Product type | L-profile |
| Component category | Control centre structural and mechanical assembly component |
| Profile configuration | L-shaped |
| Application designation | Control Centre |
| Manufacturer designation suffix | -2000 |
| Primary application | Compatible electrical control centre construction and mounting arrangements |
| Installation location | Designated structural or mounting position within the associated control centre assembly |
| Compatibility | ABB equipment configurations specifying component 288354 |
| Manufacturer identification | 7GDS288354R0000 |
Frequently Asked Questions
What is the ABB 288354 L-Profile used for?
The ABB 288354 L-Profile is a mechanical structural component identified for compatible industrial electrical control centre assemblies. It is associated with the construction, positioning or mounting arrangements specified by the equipment manufacturer.
What is the ABB order code for the 288354 L-Profile?
The manufacturer order code is 7GDS288354R0000, and the complete product designation is 288354 L-Profile (Control Centre) -2000. The component belongs to the ABB GT product group.
Does the -2000 designation confirm that the ABB 288354 profile is 2000 mm long?
The supplied manufacturer description includes the suffix -2000, but does not explicitly confirm that it represents a physical length of 2000 mm. The actual dimensions should be verified against the applicable ABB product drawing or technical documentation before ordering or installation.
Are the ABB 288354 and ABB 288353 L-Profiles interchangeable?
The ABB 288354 and ABB 288353 are separately identified control centre L-profile components with different manufacturer order codes. Interchangeability should not be assumed. Their dimensions, mounting arrangements, structural configurations and intended applications must be checked against the relevant ABB engineering documentation before either component is selected as a substitute.
Can the ABB 288354 be used as a replacement control centre profile?
Yes, the ABB 288354 can be selected for replacement applications where ABB part number 7GDS288354R0000 is specified. The replacement must match the original equipment configuration, with its dimensions, mounting orientation and fixing arrangements verified against the applicable ABB assembly documentation before installation.
Supporting Industrial Control Centre Construction and Maintenance
ABB control centre structural components provide purpose-specific mechanical assembly solutions for compatible industrial electrical equipment, helping electrical panel builders and maintenance engineers preserve the intended mounting arrangements, structural positioning and mechanical organisation of control centre and switchgear systems.
