Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
7GDS286786R0000 ABB 286786 Switch
ABB 286786 Switch, order code 7GDS286786R0000, is a manufacturer-specific electrical switching component for compatible ABB GT equipment assemblies requiring the designated switch.
£19.80
Why Choose the ABB 286786 Switch?
The ABB 286786 Switch (7GDS286786R0000) is a manufacturer-specific electrical switching component belonging to the ABB GT product group. Identified by ABB as 286786 SWITCH, this product is intended for compatible electrical equipment assemblies requiring the designated switching component within their control or switching arrangements.
Electrical switches are used to change the state of a circuit or provide a switching interface within an electrical system. Depending on their design, they may be used for control, signalling, position detection or other equipment-specific functions. The ABB 286786 provides a clearly identified manufacturer-referenced component for applications where this particular switch is specified.
Correct switch selection is essential in industrial electrical equipment because switching mechanisms, contact configurations, operating methods and electrical ratings must correspond to the intended application. The ABB 286786 Switch enables electrical panel builders, switchgear engineers and maintenance specialists to identify the required component using its original manufacturer reference rather than relying on visually similar alternatives.
With ABB order code 7GDS286786R0000, this switch can be accurately referenced in equipment parts lists, procurement systems and maintenance records. It is suitable for manufacturer-specified assembly and replacement applications where the relevant equipment documentation identifies ABB 286786 as the required switching component.
Key Advantages
- Original ABB switching component identified for compatible manufacturer-specified equipment assemblies.
- Dedicated electrical switch for designated switching or control arrangements.
- Supports equipment switching functions when correctly installed in a compatible circuit.
- Helps maintain consistency with the intended ABB equipment configuration.
- Provides a manufacturer-identified component for accurate maintenance and replacement.
- Suitable for original equipment construction and approved replacement applications.
- Supports organised servicing of industrial electrical equipment and control systems.
- Reduces the risk of selecting an incorrectly identified switch during component replacement.
- ABB order code 7GDS286786R0000 enables precise purchasing, stock identification and spare-part management.
Key Features
- Manufacturer: ABB.
- ABB product group: GT.
- Manufacturer product reference: 286786.
- ABB order code: 7GDS286786R0000.
- Manufacturer designation: 286786 SWITCH.
- Product type: Electrical switch.
- Component classification: Electrical switching component.
- Intended for compatible manufacturer-specified equipment assemblies.
- Provides a designated switching function within the appropriate electrical arrangement.
- Supports equipment control or switching applications where specified by ABB.
- Suitable for designated assembly, servicing and replacement work.
- Identifiable through its original ABB manufacturer reference.
- Requires verification of contact configuration, operating mechanism and mounting compatibility before installation.
- Electrical ratings and connection requirements must be confirmed using the applicable manufacturer documentation.
Reliable Switching Integration for Compatible Electrical Equipment
Electrical switching arrangements depend on correctly selected components, suitable circuit connections and appropriate operating mechanisms. The ABB 286786 Switch provides a dedicated manufacturer-identified component for equipment assemblies requiring this particular switch reference.
Within industrial electrical equipment, switches can perform several different functions depending on their construction and installation. They may change circuit states, provide operator commands, indicate mechanical positions or participate in equipment control sequences. The exact function of ABB 286786 must be determined from the associated equipment documentation rather than inferred from its general switch designation.
The manufacturer designation confirms that the ABB 286786 is a switch, but does not independently establish whether it is a selector switch, limit switch, auxiliary switch, microswitch, isolating switch or another switching device. Similarly, the supplied specification does not identify its number of poles, contact arrangement, operating mechanism, rated voltage, rated current or switching capacity. These details must be verified using the relevant ABB technical documentation.
Correct electrical and mechanical compatibility is particularly important because switches with similar external appearances can have different contact characteristics, operating sequences and connection arrangements. Substituting an unsuitable component may result in incorrect circuit operation or an inadequate electrical rating. The ABB 286786 should therefore be selected only for equipment configurations specifying this reference or an approved compatible alternative.
For maintenance and replacement applications, engineers should verify the original equipment reference, terminal arrangement, operating method, mounting interface and required electrical characteristics. Where the switch forms part of an interlocking, monitoring or protective arrangement, the completed installation should also be checked against the relevant equipment operating and safety requirements.
Installation should be carried out by suitably qualified personnel. Electrical equipment must be isolated and made safe before work begins. Following installation, the switch should be checked for secure mounting, correct wiring, appropriate operation and compliance with the manufacturer's instructions before the equipment is returned to service.
Typical Applications
- Compatible ABB electrical equipment assemblies requiring switch 286786.
- Manufacturer-specified industrial electrical switching arrangements.
- Electrical switchgear assemblies where the designated switch is specified.
- Industrial control panel construction and maintenance.
- Electrical distribution equipment switching interfaces.
- Replacement of corresponding ABB switch components during servicing.
- Industrial equipment control system refurbishment.
- Equipment-specific switching and monitoring arrangements where confirmed by ABB documentation.
- Professional electrical panel-building and spare-part procurement.
Technical Specifications
| Product group | GT |
|---|---|
| Product reference | 286786 |
| ABB order code | 7GDS286786R0000 |
| Manufacturer designation | 286786 SWITCH |
| Product type | Switch |
| Component category | Electrical switching component |
| Primary function | Switching operation within a compatible electrical equipment assembly |
| Application | Manufacturer-specified electrical equipment switching arrangements |
| Maintenance application | Equipment assembly, servicing and switch replacement |
| Compatibility | ABB equipment configurations specifying product 286786 |
Frequently Asked Questions
What is the ABB 286786 Switch?
The ABB 286786 is a manufacturer-specific electrical switching component identified as 286786 SWITCH. It belongs to ABB's GT product group and is intended for compatible electrical equipment assemblies requiring this particular switch.
What is the ABB 286786 Switch used for?
The ABB 286786 is intended to provide a switching function within a compatible electrical equipment assembly. Its exact operating purpose depends on the equipment design and the applicable ABB technical documentation.
Which ABB equipment is compatible with the 286786 Switch?
The supplied manufacturer designation does not identify a specific equipment model, switchgear frame or control system. Compatibility should be confirmed using the original equipment parts list, electrical schematic or ABB technical documentation.
Is the ABB 286786 a limit switch, auxiliary switch or selector switch?
The supplied manufacturer designation identifies ABB 286786 as a switch but does not specify its switching technology or operating mechanism. Its exact switch type should be verified using the relevant ABB product documentation.
What are the voltage and current ratings of the ABB 286786 Switch?
The supplied specification does not establish a rated voltage, rated current or switching capacity. These electrical characteristics must be confirmed from ABB technical documentation before the switch is connected to a circuit.
What contact configuration does the ABB 286786 Switch have?
The supplied manufacturer information does not identify the number of contacts or whether they are normally open, normally closed or changeover contacts. The contact configuration and terminal arrangement should be checked against the applicable ABB wiring diagram.
Can the ABB 286786 Switch be used for electrical isolation?
The supplied product designation does not establish that ABB 286786 is an isolating switch or safety-rated disconnection device. It must not be relied upon for electrical isolation unless the applicable ABB documentation explicitly confirms that function and the relevant ratings.
Can the ABB 286786 Switch be used as a replacement component?
Yes, where the original equipment specifies ABB 286786 or an approved compatible replacement. The contact arrangement, electrical ratings, operating mechanism and mounting requirements should be verified before installation.
What is the ABB order code for the 286786 Switch?
The manufacturer's order code is 7GDS286786R0000, corresponding to ABB product reference 286786 and designation 286786 SWITCH.
Supporting Professional Electrical Switching and Equipment Maintenance
Accurate switching component identification is essential for dependable electrical equipment operation and effective maintenance. The ABB 286786 Switch provides a manufacturer-referenced component for compatible assemblies, helping electrical panel builders and maintenance specialists select the appropriate part and maintain consistency with the intended equipment configuration.
