Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 286513 Crimp Contact, order code 7GDS286513R0000, is a manufacturer-specific electrical connector contact designed for crimp termination within compatible ABB GT equipment connection assemblies.
£143.12
The ABB 286513 Crimp Contact (7GDS286513R0000) is a manufacturer-specific electrical connection component belonging to the ABB GT product group. Identified by ABB as 286513 CRIMP CONTACT, this product is intended for compatible electrical connector assemblies requiring the designated crimp termination contact.
Crimp contacts are used in electrical connection systems to establish an electrical interface between a terminated conductor and a compatible connector arrangement. When correctly selected and installed, a crimp contact provides a mechanically retained conductor termination and supports electrical continuity through the associated connection system. The ABB 286513 offers a clearly identified manufacturer-referenced contact for applications specifying this particular component.
Correct contact selection is particularly important in industrial electrical equipment, where conductor compatibility, contact geometry, termination quality and connector mating arrangements must follow the manufacturer's specifications. The ABB 286513 Crimp Contact enables electrical panel builders, switchgear technicians and maintenance engineers to identify the required replacement or assembly component using the precise ABB order code 7GDS286513R0000.
Electrical connector performance depends on correctly matched contacts, suitable conductors and properly executed terminations. The ABB 286513 Crimp Contact provides a dedicated manufacturer-identified component for connector assemblies requiring this particular contact reference.
Crimp termination technology forms a connection by mechanically compressing a contact termination section around a conductor using appropriate tooling. When the contact, conductor and tooling are correctly matched, the resulting connection can provide reliable mechanical retention and electrical continuity. The exact crimping procedure must follow the applicable manufacturer instructions, including any specified conductor preparation, tooling, crimp profile and inspection requirements.
The manufacturer's designation confirms that the ABB 286513 is a crimp contact, but does not independently establish its conductor cross-sectional range, contact material, plating, rated current, rated voltage, contact gender or compatible connector housing. These specifications should be verified using the relevant ABB technical documentation before the contact is selected or installed.
Contact compatibility is especially important because components with similar appearances may differ in dimensions, retention features, electrical ratings and mating arrangements. An unsuitable contact can compromise termination quality or prevent correct connector engagement. The ABB 286513 should therefore be used only where the equipment documentation specifies this product or an approved equivalent.
Installation should be carried out by suitably qualified personnel using the specified crimping equipment and inspection procedures. Electrical equipment must be isolated and made safe before maintenance. After termination, the contact should be inspected for correct conductor insertion, crimp formation, mechanical retention and engagement with the compatible connector assembly.
| Product group | GT |
|---|---|
| Product reference | 286513 |
| ABB order code | 7GDS286513R0000 |
| Manufacturer designation | 286513 CRIMP CONTACT |
| Product type | Crimp contact |
| Component category | Electrical connector component |
| Termination technology | Crimp termination |
| Primary function | Conductor termination and electrical contact within a compatible connector assembly |
| Installation application | Manufacturer-specified electrical connection systems |
| Maintenance application | Connector assembly, servicing and contact replacement |
| Compatibility | ABB equipment and connector configurations specifying product 286513 |
The ABB 286513 is a manufacturer-specific electrical connector component identified as 286513 CRIMP CONTACT. It belongs to ABB's GT product group and is intended for compatible connector assemblies requiring this particular crimp termination contact.
The ABB 286513 is intended to provide a crimp-terminated electrical contact within a compatible connector assembly. Its exact mating arrangement and application depend on the connector system and the relevant ABB technical instructions.
The supplied manufacturer designation does not identify a specific connector housing, plug, socket or equipment model. Compatibility should be confirmed using the original equipment parts list, connector documentation or ABB technical drawings.
The supported conductor cross-sectional area is not stated in the supplied product specification. The permitted conductor size, construction and insulation requirements must be verified using the applicable ABB documentation before termination.
The supplied manufacturer designation identifies the component as a crimp contact but does not specify whether it is a male pin contact or female socket contact. The contact configuration should be confirmed against ABB connector documentation.
The supplied specification does not establish a rated current or voltage for this contact. Electrical ratings depend on the contact design, conductor termination and compatible connector system and should be confirmed from ABB technical documentation.
Crimp contacts require tooling appropriate to their termination design and conductor specification. The correct crimping tool, die and installation procedure for ABB 286513 should be verified using the manufacturer's instructions; a generic crimping tool should not be assumed suitable.
Yes, where the original connector assembly specifies ABB 286513 or an approved compatible replacement. The contact geometry, conductor compatibility, crimp tooling and connector retention arrangement should be checked before installation.
The manufacturer's order code is 7GDS286513R0000, corresponding to ABB product reference 286513 and designation 286513 CRIMP CONTACT.
Correct contact identification and properly executed conductor terminations are essential to dependable electrical connector assemblies. The ABB 286513 Crimp Contact provides a manufacturer-referenced connection component for compatible equipment, supporting accurate part selection, controlled installation and effective maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.