Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 236468 Self-Adhesive Bubble Gasket is a GT product group sealing accessory with a compressible bubble profile and adhesive backing for compatible electrical equipment assemblies.
£131.02
The ABB 236468 Self-Adhesive Bubble Gasket is a dedicated sealing accessory within the ABB GT product group, designed for use in compatible electrical switchgear, controlgear and enclosure assemblies. Featuring a self-adhesive backing and a bubble gasket profile, this component provides a practical solution for sealing designated interfaces between appropriately matched equipment surfaces.
The bubble-shaped sealing profile is intended to compress between mating surfaces, helping accommodate minor surface variations and form a continuous seal when correctly installed. Its self-adhesive construction supports convenient positioning during assembly, reducing the need for separate adhesive application where the manufacturer's approved installation method permits.
Identified by ABB manufacturer order code 7GDS236468R0000, the ABB 236468 is suitable for specified original equipment assembly, gasket replacement and refurbishment applications. Correct gasket selection and installation are important for maintaining the intended sealing arrangement of compatible electrical equipment.
Electrical enclosures, switchgear assemblies and controlgear compartments often require appropriately selected gaskets to seal joints between covers, panels, doors and other mating components. The ABB 236468 Self-Adhesive Bubble Gasket provides a dedicated sealing component for compatible equipment arrangements, combining a compressible bubble profile with an adhesive-backed installation method.
When compressed within its intended working range, a bubble gasket can help create a sealing interface between adjoining surfaces. This makes correct gasket positioning, surface preparation and compression particularly important. Excessive compression, insufficient contact or incorrect placement may compromise the intended sealing performance.
The ABB 236468 should be selected according to the relevant manufacturer's assembly documentation. Its product designation does not independently establish a specific gasket material, profile dimensions, temperature range, chemical resistance or ingress protection rating. These characteristics must be confirmed for the intended application rather than assumed from the bubble gasket description alone.
The self-adhesive backing is intended to help secure the gasket to a compatible surface during installation. Before fitting, the mounting surface should be prepared in accordance with ABB's instructions, with attention to cleanliness, surface condition and adhesive compatibility. The gasket should be positioned to provide the required continuous sealing path without inappropriate stretching, gaps or overlapping joints.
For maintenance applications, the existing gasket arrangement should be inspected before replacement. The ABB 236468 should only be substituted for another gasket where the equipment documentation confirms compatibility. The ingress protection rating of the completed assembly depends on the enclosure construction, gasket installation, compression, fixing arrangements and other sealing components.
| Manufacturer order code | 7GDS236468R0000 |
|---|---|
| Product group | GT |
| Product designation | Self-Adhesive Bubble Gasket |
| Product type | Electrical equipment sealing accessory |
| Component type | Bubble gasket |
| Gasket profile | Bubble-shaped |
| Fixing method | Self-adhesive |
| Primary function | Sealing compatible equipment interfaces |
| Installation arrangement | Adhesive-backed application to a suitable mating surface |
| Equipment application | Compatible electrical switchgear, controlgear and enclosure assemblies |
| Compatibility | ABB equipment assemblies specifying part 236468 or order code 7GDS236468R0000 |
| Typical use | Equipment assembly, gasket replacement and refurbishment |
The ABB 236468 is a self-adhesive bubble gasket intended to provide a compressible sealing interface between designated mating surfaces in compatible ABB electrical equipment assemblies.
A self-adhesive bubble gasket is a sealing component featuring a raised, compressible profile and an adhesive backing. The bubble profile compresses between mating surfaces, while the adhesive helps position and retain the gasket during installation.
The ABB 236468 is identified as a sealing gasket, but no individual IP rating is specified in its supplied product designation. The completed equipment assembly's ingress protection rating depends on its approved design, gasket installation and other sealing arrangements.
Yes, where the relevant ABB equipment documentation specifies part 236468 or confirms its compatibility. Gasket profile, dimensions, material and adhesive requirements should be checked before replacing an existing seal.
The ABB manufacturer order code is 7GDS236468R0000. The product belongs to the ABB GT product group and is designated as a Self-Adhesive Bubble Gasket.
ABB electrical assembly accessories support panel builders, equipment manufacturers and maintenance engineers in constructing and servicing compatible switchgear, controlgear and enclosure systems. The ABB 236468 Self-Adhesive Bubble Gasket provides a dedicated compressible sealing component with an adhesive-backed mounting arrangement, supporting correct component selection for approved ABB GT equipment assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.