Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 236445 E1.2 WD 4P W500 breaker compartment from the GT product group, designed for integrating compatible four-pole ABB Emax 2 E1.2 air circuit breakers into 500 mm wide low-voltage switchgear assemblies.
£142.29
The ABB 236445 is a purpose-designed circuit breaker compartment for ABB Emax 2 E1.2 air circuit breaker installations, intended for integration into compatible low-voltage switchgear and power distribution assemblies. Part of the ABB GT product group, this compartment is specified for a four-pole (4P) E1.2 breaker configuration within a 500 mm wide (W500) assembly.
Circuit breaker compartments are essential elements of low-voltage switchgear construction, providing dedicated installation spaces for protective switching devices and their associated mounting arrangements. The ABB 236445 is identified by the manufacturer's BREAKER COMPARTMENT E1.2 WD 4P W500 designation, allowing switchgear manufacturers and electrical panel builders to select the appropriate compartment for compatible Emax 2 assemblies.
Designed around the ABB Emax 2 E1.2 breaker frame, the ABB 236445 supports the integration of four-pole air circuit breaker equipment into modular electrical distribution systems. Its W500 configuration makes it suitable for specified 500 mm wide switchgear arrangements, while its dedicated compartment design supports organised equipment positioning, assembly construction and maintenance access.
Air circuit breakers are widely used in low-voltage electrical distribution systems to provide switching, isolation and protection against electrical faults. The ABB Emax 2 series includes advanced air circuit breakers designed for power distribution applications, with protection and monitoring functionality determined by the selected breaker and electronic trip unit.
The ABB 236445 Breaker Compartment E1.2 WD 4P W500 provides a dedicated compartment configuration for integrating compatible four-pole ABB Emax 2 E1.2 circuit breaker equipment into a 500 mm wide switchgear arrangement. The compartment supports the physical organisation of the breaker installation, helping panel builders establish the required equipment position within the assembly.
The Emax 2 E1.2 breaker frame is available in configurations with rated currents up to 1,600 A, depending on the selected circuit breaker model. The ABB 236445 is a compartment accessory rather than the circuit breaker itself, so electrical ratings, protection functions and switching capabilities are determined by the complete breaker and switchgear configuration.
Correct integration requires verification of the specified breaker execution, mounting hardware, electrical clearances, connections and associated compartment components. The completed switchgear assembly should be designed and verified in accordance with the relevant ABB installation instructions and applicable low-voltage switchgear standards.
| Product group | GT |
|---|---|
| ABB order code | 7GDS236445R0000 |
| Product designation | Breaker Compartment E1.2 WD 4P W500 |
| Product type | Circuit breaker compartment |
| Product category | Low-voltage switchgear accessories |
| Compatible circuit breaker series | ABB Emax 2 |
| Compatible circuit breaker frame | E1.2 |
| Breaker pole configuration | 4-pole |
| Compartment designation | WD |
| Assembly width designation | W500 |
| Nominal assembly width | 500 mm |
| Primary function | Circuit breaker compartment integration and support |
| Installation type | Internal switchgear assembly installation |
| Application | Low-voltage electrical distribution and switchgear assemblies |
The ABB 236445 is a circuit breaker compartment designed for integrating compatible ABB Emax 2 E1.2 four-pole air circuit breaker equipment into low-voltage switchgear assemblies with a W500 width configuration.
The ABB 236445 is specified for the ABB Emax 2 E1.2 air circuit breaker frame in a four-pole (4P) configuration. The precise breaker execution and associated installation components must match the compartment arrangement.
WD identifies the manufacturer's specified compartment configuration, 4P indicates a four-pole circuit breaker arrangement, and W500 identifies a nominal switchgear assembly width of 500 mm. The exact WD execution should be verified against the relevant ABB assembly documentation.
The ABB 236445 is identified as a breaker compartment accessory, not a complete air circuit breaker. The Emax 2 E1.2 circuit breaker and any required mounting, connection or operating accessories should be specified separately unless explicitly included in the supplier's offering.
No. The ABB 236445 is intended for compatible ABB GT switchgear assemblies requiring an E1.2 WD four-pole compartment with a W500 configuration. A nominal enclosure width of 500 mm alone does not guarantee compatibility, so the breaker execution, compartment arrangement and associated mounting requirements must be checked before installation.
ABB GT switchgear accessories support the construction of professional low-voltage electrical distribution assemblies. The ABB 236445 Breaker Compartment E1.2 WD 4P W500 provides a dedicated compartment solution for compatible four-pole ABB Emax 2 E1.2 air circuit breaker installations, helping electrical engineers and panel builders achieve organised breaker integration within 500 mm wide switchgear configurations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.