Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB S2C-S6RU is a modular 1CO signal contact designed to provide remote trip indication from compatible ABB UL 489 and UL 1077 circuit protection devices.
£33.61
The ABB S2C-S6RU is a signal contact with one changeover contact (1CO) designed for use with compatible ABB modular circuit protection devices. Unlike a standard auxiliary contact used primarily to indicate switching position, a signal contact is intended to provide remote indication when the associated protective device has tripped due to an electrical fault.
Designed for ABB UL 489 / UL 1077 circuit protection systems, the S2C-S6RU enables trip information to be transferred to external monitoring and control equipment. Its changeover contact provides both normally open and normally closed signalling paths from a common terminal, supporting flexible integration into PLC inputs, alarm circuits and supervisory systems.
The compact modular construction allows the S2C-S6RU to be fitted alongside compatible ABB protective devices within distribution boards and control panels. By distinguishing protective tripping from normal manual switching, it provides useful diagnostic information for industrial, commercial and automation installations where rapid identification of a circuit fault is important.
A signal contact provides valuable information about the operating condition of a circuit protection device. When the associated compatible ABB device trips in response to an electrical fault, the S2C-S6RU changes the state of its 1CO signalling contact, allowing the event to be communicated to external monitoring or control equipment.
This functionality is particularly useful where operators need to differentiate a protective trip from routine manual switching. Connected to an appropriate PLC, alarm, indicator or supervisory circuit, the S2C-S6RU can support faster fault identification and improve visibility of circuit protection status within complex electrical installations.
| Series | S2C accessories |
|---|---|
| SKU | S2CS6RU |
| ABB order code | 2CDS200924R0001 |
| Product type | Signal contact |
| Contact configuration | 1CO changeover contact |
| Contact arrangement | 1 NO + 1 NC from common contact |
| Primary function | Remote trip signalling |
| Application | Circuit protection monitoring and fault indication |
| Installation type | Modular accessory mounting |
| Application standards | UL 489 / UL 1077 systems |
| Product group | UL489 / UL1077 MCB |
The ABB S2C-S6RU is a signal contact designed to provide remote electrical indication when a compatible ABB protective device trips.
The S2C-S6RU has one changeover contact (1CO), providing normally open and normally closed signalling paths from a common contact.
A signal contact such as the S2C-S6RU is intended to indicate a protective trip, whereas an auxiliary contact is primarily used to indicate the switching position of the associated protective device.
Yes. Its changeover signalling contact can be incorporated into an appropriately designed PLC input, alarm or monitoring circuit for remote trip indication.
No. The S2C-S6RU is a signalling accessory. Electrical circuit protection is provided by the compatible ABB circuit breaker or supplementary protector to which it is fitted.
ABB modular signalling accessories provide an effective way to integrate circuit protection equipment with monitoring and control systems, helping operators identify protective trips and respond efficiently to electrical faults.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.