Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1SDA132716R1 is a three-pole plug-in fixed part for compatible SACE Tmax XT1 circuit breakers, featuring a mixed connection arrangement with upper horizontal rear terminals and lower cable lugs.
£2,304.62
The ABB 1SDA132716R1 XT1 P FP 3P MIXED HR SUP + LUGS INF-PDC3 is a configured fixed part for a three-pole plug-in SACE Tmax XT1 circuit breaker. It uses a mixed terminal arrangement to provide different connection methods on the upper and lower sides of the fixed part, supporting specialised low-voltage distribution layouts.
This configuration combines horizontal rear (HR) terminals on the upper side with lower cable lugs. ABB's mixed-terminal architecture allows the top and bottom of a compatible breaker or fixed part to use different terminal types, giving panel builders greater flexibility when adapting an XT1 plug-in installation to the available busbar and cable connection arrangement.
Designed around the XT1 plug-in fixed-part platform, the 1SDA132716R1 provides the stationary interface for a compatible moving part of a plug-in circuit breaker. The mixed HR and lug configuration makes it particularly useful where rear busbar connectivity is required on one side while conventional cable termination is required on the other.
ABB's plug-in architecture separates the circuit-breaker assembly into a stationary fixed part and a removable moving part. The fixed part remains connected within the switchboard, allowing a compatible plug-in breaker to be connected or removed without routinely disturbing the fixed power connections.
The 1SDA132716R1 adds further installation flexibility through its mixed HR upper and lug lower connection arrangement. This allows the upper side to interface through horizontal rear connections while the lower side accommodates cable termination, helping panel builders address switchboards where the incoming and outgoing connection requirements differ.
| Series | SACE Tmax XT |
|---|---|
| Product | XT1 P FP 3P MIXED HR SUP + LUGS INF-PDC3 |
| ABB order code | 1SDA132716R1 |
| Product type | Plug-in circuit-breaker fixed part |
| Compatible frame | XT1 |
| Version | Plug-in |
| Number of poles | 3 |
| Terminal configuration | Mixed |
| Upper terminal type | HR horizontal rear |
| Lower terminal type | Cable lugs |
| Connection arrangement | HR upper / lugs lower |
| XT1 fixed-part rated uninterrupted current | 160 A |
| Rated frequency | 50 / 60 Hz |
| Rated insulation voltage | 800 V |
| Rated impulse withstand voltage | 8 kV |
| XT1 fixed-part rated operational voltage | Up to 690 V AC / 500 V DC |
The ABB 1SDA132716R1 is a three-pole plug-in fixed part for compatible SACE Tmax XT1 circuit breakers, configured with mixed upper horizontal rear terminals and lower cable lugs.
P FP identifies the fixed part of a plug-in circuit-breaker arrangement. It remains installed in the switchboard and interfaces with the corresponding compatible XT1 plug-in moving part.
Mixed means that different terminal types are used on the upper and lower sides of the fixed part rather than the same terminal arrangement being used at both ends.
The specified configuration uses HR horizontal rear terminals on the upper side and cable lugs on the lower side.
No. The 1SDA132716R1 is the fixed part of a plug-in XT1 circuit-breaker system. A compatible moving part and circuit-breaker configuration are required to form the complete plug-in assembly.
ABB SACE Tmax XT plug-in accessories provide purpose-designed fixed interfaces for flexible switchboard construction, with mixed terminal configurations helping panel builders combine different busbar and cable connection requirements within a coordinated low-voltage distribution system.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.