Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB T4 W FP 4p HR 1SDA054748R1 is a 320 A four-pole fixed part for compatible withdrawable SACE Tmax T4 moulded-case circuit breakers, featuring rear flat horizontal terminals and rated operational voltages up to 690 V AC and 750 V DC.
£858.89
The ABB T4 W FP 4p HR, order code 1SDA054748R1, is a four-pole fixed part for withdrawable ABB SACE Tmax T4 moulded-case circuit breakers. It forms the stationary section of a compatible withdrawable T4 installation, providing the fixed electrical and mechanical interface while allowing the circuit breaker moving part to be withdrawn when required.
This version features rear flat horizontal terminals, identified by the ABB designation HR. The horizontal rear-terminal arrangement is designed for switchboard installations where conductors or busbars connect from behind the circuit breaker, supporting practical integration into engineered low-voltage distribution assemblies.
The T4 W FP 4p HR has a four-pole configuration, a rated operational voltage of up to 690 V AC and 750 V DC, and is designed specifically for the ABB SACE Tmax T4 platform. Its withdrawable architecture supports maintainability while providing a purpose-designed connection base for compatible T4 circuit breakers.
A withdrawable circuit breaker arrangement separates the stationary connection assembly from the removable breaker moving part. The ABB T4 W FP 4p HR remains installed within the switchboard and provides the fixed interface for a compatible Tmax T4 breaker, helping simplify breaker removal, replacement and maintenance procedures.
Its rear flat horizontal terminals provide a defined rear connection arrangement for conductors or busbars. This makes the fixed part particularly suitable for engineered distribution boards where rear access, horizontal connection geometry and efficient switchboard integration are important design considerations.
| Series | SACE Tmax T4 |
|---|---|
| Order code | 1SDA054748R1 |
| Product group | 310511-T-Max T4 - T8 |
| Product main type | Accessories for Tmax T |
| Product type | Fixed part |
| Device | Fixed part |
| Version | W – withdrawable |
| Rated current | 320 A |
| Number of poles | 4 |
| Terminal connection type | Withdrawable circuit-breakers rear flat horizontal |
| Rated operational voltage | 690 V AC / 750 V DC |
| Short-circuit performance level | L |
| Suitable for | ABB SACE Tmax T4 |
| Suitable product class | Moulded-case circuit breakers |
| Standards | IEC |
| Product net width | 172 mm |
| Product net height | 209 mm |
| Product net depth | 50 mm |
| Product net weight | 2.5 kg |
| EAN | 8015644558697 |
The ABB T4 W FP 4p HR is a four-pole fixed part for compatible withdrawable ABB SACE Tmax T4 moulded-case circuit breakers, providing the stationary mechanical and electrical interface within the switchboard.
HR identifies the rear flat horizontal terminal configuration, meaning the fixed part uses flat rear terminals arranged horizontally.
The ABB T4 W FP 4p HR has a nominal current rating of 320 A.
The fixed part is rated for operational voltages up to 690 V AC and 750 V DC.
The T4 W FP 4p HR is designed for compatible ABB SACE Tmax T4 withdrawable moulded-case circuit breakers.
ABB SACE Tmax fixed parts provide purpose-designed installation interfaces for withdrawable moulded-case circuit breakers, supporting maintainable low-voltage distribution assemblies with terminal configurations engineered for different switchboard connection requirements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.