Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Lovato SA0B2PA320R-ENC is an enclosed two-pole Type 1+2 surge protection device with 12.5 kA impulse current per pole, 50 kA maximum discharge current and 320 V AC maximum continuous operating voltage for low-voltage AC power systems.
£169.86
The Lovato SA0B2PA320R-ENC is an enclosed two-pole Type 1+2 surge protection device (SPD) designed to protect low-voltage AC electrical installations against transient overvoltages caused by lightning and switching events. Built around the proven Lovato SA0B Type 1+2 monoblock SPD, it provides coordinated lightning-current and surge protection for power distribution applications.
The two-pole SPD has a maximum continuous operating voltage of 320 V AC and an impulse current Iimp of 12.5 kA per pole with a 10/350 µs waveform. It also provides a maximum discharge current Imax of 50 kA with an 8/20 µs waveform and a voltage protection level Up of less than 1.5 kV.
The SA0B2PA320R-ENC is based on a monoblock SPD with integrated thermal protection, frontal operating/end-of-life indication and a remote status contact. Its enclosed format provides a practical complete surge-protection assembly for electrical distribution systems where a housed Type 1+2 protective solution is required.
Type 1+2 surge protection devices are designed to handle both high-energy lightning-current impulses and lower-energy transient overvoltages induced within an electrical installation. The Lovato SA0B2PA320R-ENC combines these functions in a two-pole enclosed solution suitable for installation near the incoming power distribution point.
Its 12.5 kA per-pole Iimp rating, 50 kA maximum discharge capability and voltage protection level below 1.5 kV provide robust protection for downstream electrical and electronic equipment. Integrated status indication and a remote contact also simplify inspection and remote monitoring of the protective device.
Tick the specs you need, then view products that match.
| Impulse Current Iimp (kA) | 12.5 kA | |
|---|---|---|
| Device Type | Surge protection device | |
| SPD Type | Type 1+2 | |
| Nominal Discharge Current (In) | 20 kA | |
| Remote Signal | Yes | |
| HS Code | 85365080 | |
| Manufacturer | Lovato Electric | |
| Series | SA0B | |
| Model | SA0B2PA320R-ENC | |
| Product type | Enclosed surge protection device (SPD) | |
| SPD type / class | Type 1+2 | |
| Number of poles | 2 | |
| Application | AC power lines | |
| Rated system voltage | 230 V AC | |
| Maximum continuous operating voltage Uc | 320 V AC | |
| Impulse current Iimp (10/350 µs) | 12.5 kA per pole | |
| Nominal discharge current In (8/20 µs) | 20 kA | |
| Maximum discharge current Imax (8/20 µs) | 50 kA | |
| Voltage protection level Up | <1.5 kV | |
| Response time | <25 ns | |
| Thermal protection | Integrated | |
| Status indication | Frontal operating / end-of-life indication | |
| Remote indication | Changeover auxiliary contact | |
| SPD operating temperature | −40 to +85 °C | |
| Maximum altitude | 2000 m | |
| SPD mounting | DIN rail | |
| SPD flexible conductor capacity | Up to 25 mm² | |
| SPD rigid conductor capacity | Up to 35 mm² | |
| Standard | IEC/EN 61643-11 |
The SA0B2PA320R-ENC is an enclosed Type 1+2 surge protection device used to protect low-voltage AC electrical systems and connected equipment against lightning-current impulses and transient overvoltages.
The underlying two-pole SA0B SPD has an impulse current Iimp rating of 12.5 kA per pole using the 10/350 µs waveform.
The SPD has a maximum discharge current Imax of 50 kA using the 8/20 µs waveform.
The SA0B2PA320R provides a voltage protection level Up of less than 1.5 kV.
Yes. The SA0B2PA320R incorporates an auxiliary changeover contact for remote status indication as well as frontal operating and end-of-life indication.
Lovato surge protection devices provide dependable protection for industrial, commercial and building electrical installations, helping safeguard power distribution systems and sensitive equipment against damaging lightning-related and switching overvoltages.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.