Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.43.8.275.1020 Type 2 three-pole surge protection device for TN-C electrical systems, featuring 275 V AC maximum continuous operating voltage, 20 kA nominal discharge current, low-leakage varistor and spark gap technology, replaceable modules and remote signalling.
£174.67
The Finder 7P.43.8.275.1020 is a high-performance Type 2 three-pole surge protection device (SPD) designed to protect three-phase TN-C electrical installations against transient overvoltages caused by induced lightning surges and electrical switching disturbances. As part of the Finder 7P Series surge protection range, it combines metal oxide varistor technology with encapsulated gas discharge tubes to provide dependable protection for industrial electrical distribution and automation systems.
This surge arrester uses three combined varistor and spark gap protection elements, connected between the L1, L2 and L3 phase conductors and the PEN conductor. The series-connected protection technology provides high insulation resistance, minimises normal operating leakage current and prevents follow current after a surge event. Replaceable protection modules, visual status indication and an integrated remote signalling contact simplify maintenance and condition monitoring.
With a 230 V AC nominal phase-to-PEN voltage, a 275 V AC maximum continuous operating voltage and a 20 kA nominal discharge current, the Finder 7P.43.8.275.1020 is suitable for compatible three-phase TN-C power distribution systems. Its compact 53.8 mm width, IP20 protection rating and standard 35 mm DIN rail mounting enable straightforward installation inside electrical distribution boards and industrial control enclosures.
Transient overvoltages can enter industrial electrical installations through incoming power supplies, distribution wiring and switching operations. Surge protection devices such as the Finder 7P.43.8.275.1020 help protect sensitive electrical equipment by diverting transient surge currents and limiting the voltage appearing across protected circuits. Its three-pole configuration provides protection between each phase conductor and the combined protective earth and neutral conductor in compatible TN-C systems.
The Finder 7P.43.8.275.1020 combines varistor and encapsulated spark gap technology to provide effective surge limitation without sustained follow current or significant normal operating leakage current. Its integrated remote signalling contact allows protection status to be monitored through compatible alarm, PLC or supervisory systems, while replaceable modules and visual condition indicators support preventative maintenance and dependable long-term operation.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series Surge Protection Devices |
| Model | 7P.43.8.275.1020 |
| Product type | Three-phase AC surge protection device with remote signalling |
| SPD classification | Type 2 |
| Number of poles | 3 |
| Earthing system | TN-C |
| Protection configuration | L1-PEN, L2-PEN, L3-PEN |
| Protection technology | Combined metal oxide varistor and encapsulated gas discharge tube |
| Nominal system voltage (Un) | 230 V AC phase-to-PEN |
| Maximum continuous operating voltage (Uc) | 275 V AC |
| Nominal discharge current (In, 8/20 µs) | 20 kA |
| Maximum discharge current (Imax, 8/20 µs) | 25 kA |
| Voltage protection level (Up) | 1.2 kV |
| Follow current | No follow current |
| Maximum backup fuse rating | 160 A gG |
| Short-circuit current rating (ISCCR) | 35 kA with specified upstream protection |
| Status indication | Visual Healthy/Replace indicator |
| Remote signalling | Integrated changeover contact |
| Remote contact configuration | 1 CO (SPDT) |
| Remote signalling connector | 07P.01 included |
| Protection modules | Replaceable |
| Protection rating | IP20 |
| Operating temperature | −40 to +80 °C |
| Mounting type | 35 mm DIN rail (EN 60715) |
| Module width | 3 modules |
| Dimensions (W × H × D) | approximately 53.8 × 87.6 × 65.9 mm |
| Terminal type | Screw terminals |
| Applicable standard | EN 61643-11:2012 |
| EAN | 8012823423180 |
The Finder 7P.43.8.275.1020 is a Type 2 three-pole surge protection device designed to protect three-phase TN-C electrical installations against transient overvoltages caused by induced lightning and switching disturbances.
The device has a 230 V AC nominal phase-to-PEN voltage, a 275 V AC maximum continuous operating voltage, a 20 kA nominal discharge current and a 25 kA maximum discharge current.
The device combines metal oxide varistors and encapsulated gas discharge tubes in series. This arrangement provides high insulation resistance, minimises normal operating leakage current and prevents follow current after a surge event.
Yes. The device includes an integrated 1 CO (SPDT) remote signalling contact for monitoring the status of the surge protection elements. The 07P.01 connector is included for connection to compatible monitoring or alarm systems.
The Finder 7P.43.8.275.1020 is designed for three-phase TN-C electrical systems, providing surge protection between the L1, L2 and L3 phase conductors and the combined protective earth and neutral (PEN) conductor.
Finder 7P Series surge protection devices provide dependable transient overvoltage protection for industrial electrical installations, combining advanced varistor and spark gap technology, replaceable protection modules and remote status monitoring to help electrical engineers, panel builders and automation professionals safeguard equipment and maintain reliable system operation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.