Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.42.8.275.1020 is a Type 2 surge protection device for 230 V AC single-phase TT and TN-S electrical systems, featuring 20 kA nominal discharge current, replaceable modules and remote fault signalling.
£129.89
The Finder 7P.42.8.275.1020 is a high-performance Type 2 surge protection device (SPD) designed to protect single-phase electrical installations against transient overvoltages caused by lightning-induced surges and electrical switching operations. As part of the Finder 7P Series surge protection range, it provides dependable protection for electrical distribution boards, industrial control panels and sensitive electrical equipment.
This surge arrester combines metal oxide varistor (MOV) and encapsulated gas discharge tube (GDT) technology to deliver effective surge suppression with very low leakage current. Its replaceable protection modules, visual status indicators and integrated remote signalling contact simplify maintenance and allow electrical system operators to monitor the condition of the protective components.
Designed for 230 V AC single-phase TT and TN-S electrical systems, the Finder 7P.42.8.275.1020 provides a 20 kA nominal discharge current and a maximum continuous operating voltage of 275 V AC on the line-to-neutral protection path. Its compact two-module design supports straightforward installation on a standard 35 mm DIN rail inside electrical distribution enclosures.
Surge protection devices such as the Finder 7P.42.8.275.1020 help prevent damage to electrical and electronic equipment by limiting transient overvoltages. When a surge occurs, the protective components provide a controlled path for the surge current, reducing the voltage stress imposed on connected equipment.
The Finder 7P.42 uses a coordinated protection arrangement with a varistor and gas discharge tube between line and neutral and a gas discharge tube between neutral and protective earth. This configuration is particularly suitable for single-phase TT and TN-S electrical networks where effective surge protection and low leakage current are important.
The device is intended for installation at the boundary between lightning protection zones LPZ 1 and LPZ 2, or higher zones, as part of a coordinated surge protection system. Replaceable modules and remote status signalling help maintain protection availability while simplifying inspection and servicing.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Model | 7P.42.8.275.1020 |
| Product type | Surge protection device / surge arrester |
| SPD classification | Type 2 |
| Protection configuration | 1+NPE |
| Electrical network compatibility | Single-phase TT and TN-S |
| Nominal system voltage (Un) | 230 V AC |
| Maximum continuous operating voltage (Uc), L–N | 275 V AC |
| Maximum continuous operating voltage (Uc), N–PE | 255 V AC |
| Nominal discharge current (In), L–N | 20 kA (8/20 µs) |
| Nominal discharge current (In), N–PE | 20 kA (8/20 µs) |
| Maximum discharge current (Imax), L–N | 25 kA (8/20 µs) |
| Maximum discharge current (Imax), N–PE | 40 kA (8/20 µs) |
| Voltage protection level (Up), L–N | 1.2 kV |
| Voltage protection level (Up), N–PE | 1.5 kV |
| Protection technology | Varistor and encapsulated gas discharge tube |
| Short-circuit current rating (Isccr) | 35 kA |
| Maximum backup fuse rating | 125 A gL/gG |
| Response time | 100 ns |
| Operating temperature | −40 to +80 °C |
| Protection rating | IP20 |
| Mounting type | 35 mm DIN rail, EN 60715 |
| Terminal type | Screw terminals |
| Remote signalling | 1 changeover contact (SPDT) |
| Status indication | Visual Healthy / Replace indication |
| Replaceable modules | Yes |
| L–N replacement module | 7P.40.8.275.0020 |
| N–PE replacement module | 7P.40.1.000.0020 |
| Construction width | 2 modular spaces |
| Dimensions (H × W × D) | approx. 87.6 × 35.8 × 65.9 mm |
| Applicable standard | EN 61643-11 |
| EAN | 8012823423197 |
The Finder 7P.42.8.275.1020 is a Type 2 surge protection device designed to protect single-phase electrical installations and connected equipment against transient overvoltages caused by lightning-induced surges and switching operations.
The device is designed for 230 V AC single-phase TT and TN-S electrical systems, with a maximum continuous operating voltage of 275 V AC between line and neutral.
The device has a 20 kA nominal discharge current on both protection paths, with maximum discharge currents of 25 kA between line and neutral and 40 kA between neutral and protective earth.
Yes. The Finder 7P.42.8.275.1020 features replaceable surge protection modules, allowing worn or damaged protective elements to be replaced without changing the complete device assembly.
Yes. The device includes visual protection status indication and a remote SPDT changeover contact, allowing its condition to be monitored locally or through an external monitoring system.
The device is designed for installation on a 35 mm DIN rail inside suitable electrical distribution boards or control enclosures, typically at the boundary between LPZ 1 and LPZ 2 protection zones.
Finder 7P Series surge protection devices provide dependable protection for low-voltage electrical installations, combining effective surge suppression, replaceable protective modules and convenient status monitoring to help safeguard electrical distribution systems and sensitive equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.