Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.32.8.275.0005 is an IP65-rated Type 3 surge protection device for 230 V AC LED lighting systems, featuring 1+1 varistor and gas discharge tube protection, 275 V AC maximum continuous operating voltage, 5 kA nominal discharge current, LED replacement indication and three pre-wired connection leads.
£42.11
The Finder 7P.32.8.275.0005 is a compact and reliable Type 3 AC surge protection device (SPD) designed to protect LED lighting installations and sensitive electrical equipment against transient overvoltages. As part of the Finder 7P surge protection series, this single-phase surge arrester provides point-of-use protection against voltage spikes caused by lightning-induced surges and electrical switching events.
Featuring an advanced 1+1 protection configuration combining a metal oxide varistor (MOV) and a gas discharge tube (GDT), the Finder 7P.32.8.275.0005 provides protection between live and neutral and between neutral and protective earth. This arrangement offers a low voltage protection level while helping avoid continuous earth leakage current, making it particularly suitable for sensitive electronic equipment and modern LED lighting systems.
With a 230 V AC nominal operating voltage, a 275 V AC maximum continuous operating voltage and a 5 kA nominal discharge current, the Finder 7P.32.8.275.0005 is ideal for single-phase lighting and electrical installations. Its IP65-rated enclosure, integrated LED replacement indication and three pre-wired 150 mm connection leads make it suitable for street lighting, commercial LED luminaires, architectural lighting and industrial lighting applications.
Modern LED lighting systems contain sensitive electronic components, including LED drivers, power supplies and control circuits, which can be damaged by transient overvoltages. These disturbances may originate from nearby lightning activity, electrical switching operations or other events on the electrical supply network. The Finder 7P.32.8.275.0005 helps protect connected equipment by limiting transient overvoltages through its combined varistor and gas discharge tube protection arrangement.
The device features a 1+1 protection configuration consisting of a metal oxide varistor between live and neutral and a gas discharge tube between neutral and protective earth. The varistor responds rapidly to excessive transient voltages, while the gas discharge tube provides a surge discharge path to protective earth without creating continuous earth leakage current during normal operation. This arrangement is particularly advantageous for sensitive lighting electronics and single-phase TT or TN-S electrical systems.
With a 1.65 kV voltage protection level between live and neutral and a 1.5 kV protection level for the L(N)-PE path, the Finder 7P.32.8.275.0005 helps reduce the voltage stress experienced by connected electronic equipment. Its 25 ns L-N response time and 100 ns L(N)-PE response time support rapid protection against potentially damaging electrical transients.
As a Type 3 surge protection device, this model is designed for installation close to the equipment requiring protection. It is particularly suitable as the final stage of a coordinated surge protection system, complementing upstream Type 1 or Type 2 surge protection devices installed at distribution boards or other electrical protection points.
The IP65-rated enclosure provides resistance to dust and water jets, making the device suitable for appropriately designed indoor and outdoor lighting installations. Its compact dimensions and three pre-wired 150 mm connection leads simplify integration into LED luminaire housings, electrical junction boxes and other suitable equipment.
An integrated LED replacement indicator provides a visual indication when the surge protection device has reached its replacement condition. This helps maintenance personnel identify an exhausted protection unit during routine inspections. The Finder 7P.32.8.275.0005 is a compact wired SPD rather than a replaceable cartridge assembly, so the complete device should be replaced when its protection function is exhausted.
| Manufacturer | Finder |
|---|---|
| Series | 7P Surge Protection Devices |
| Model | 7P.32.8.275.0005 |
| Alternative part number | 7P3282750005 |
| Product type | AC surge protection device for LED lighting |
| SPD classification | Type 3 / Class III |
| Protection technology | Metal oxide varistor (MOV) and gas discharge tube (GDT) |
| Protection configuration | 1+1 (L-N and N-PE) |
| Number of phases | Single-phase |
| Earthing systems | TT and TN-S with neutral |
| Nominal voltage (UN) | 230 V AC |
| Maximum continuous operating voltage (UC) | 275 V AC |
| Nominal discharge current L-N (In) | 5 kA (8/20 µs) |
| Nominal discharge current L(N)-PE (In) | 5 kA (8/20 µs) |
| Maximum discharge current L-N (Imax) | 10 kA (8/20 µs) |
| Maximum discharge current N-PE (Imax) | 10 kA (8/20 µs) |
| Combined-wave open-circuit voltage L-N (UOC) | 10 kV |
| Combined-wave open-circuit voltage L(N)-PE (UOC) | 10 kV |
| Voltage protection level L-N (Up) | 1.65 kV |
| Voltage protection level L(N)-PE (Up) | 1.5 kV |
| Response time L-N (ta) | 25 ns |
| Response time L(N)-PE (ta) | 100 ns |
| Short-circuit current rating (ISSCR) | 1.5 kA rms |
| Maximum upstream overcurrent protection | 16 A gL/gG fuse, B16 A or C10 A circuit breaker |
| Ambient operating temperature | −25 to +80 °C |
| Protection rating | IP65 |
| Installation type | Surface / recessed mounting within suitable equipment |
| Connection type | Pre-wired leads |
| Number of connection leads | 3 |
| Connection lead length | 150 mm |
| Electrical connections | Live (L), Neutral (N) and Protective Earth (PE) |
| Status indication | LED replacement indicator |
| Remote signalling | Not included |
| Dimensions (H × W × D) | 44 × 39 × 13 mm |
| EAN | 8012823399478 |
| Applicable standard | EN 61643-11:2012 |
| Primary application | LED lighting and single-phase electronic equipment protection |
The Finder 7P.32.8.275.0005 is a Type 3 AC surge protection device designed to protect LED lighting systems, electronic drivers and sensitive electrical equipment against transient overvoltages caused by lightning-induced surges and electrical switching events.
The device is designed for a 230 V AC nominal supply and has a maximum continuous operating voltage of 275 V AC, making it suitable for compatible single-phase mains-powered lighting installations.
The Finder 7P.32.8.275.0005 has a 5 kA nominal discharge current and a 10 kA maximum discharge current for its specified protection paths, measured using an 8/20 µs surge waveform. It also has a 10 kV combined-wave open-circuit test voltage.
The 1+1 configuration combines a metal oxide varistor between live and neutral with a gas discharge tube between neutral and protective earth. This provides protection against transient overvoltages while helping avoid continuous earth leakage current during normal operation.
Yes. The device is suitable for LED street lighting, outdoor luminaires and commercial lighting systems. Its compact construction, IP65 protection rating and three pre-wired connections allow installation close to sensitive LED drivers and electronic lighting components.
The IP65 rating means the device enclosure is dust-tight and protected against water jets. This makes it suitable for use in appropriately designed outdoor and industrial lighting installations, subject to the manufacturer's installation requirements.
Yes. The device includes an LED replacement indicator that signals when the surge protection device requires replacement, helping maintenance personnel identify an exhausted protection unit during routine inspections.
Both devices are Type 3 surge protectors for 230 V AC single-phase systems. The 7P.31.8.275.0005 provides unipolar L-N protection with two connection leads, while the 7P.32.8.275.0005 uses a 1+1 varistor and gas discharge tube configuration with three connection leads for live, neutral and protective earth.
No. The Finder 7P.32.8.275.0005 is a Type 3 surge protection device intended for point-of-use protection of sensitive equipment. It does not replace Type 1 or Type 2 surge protection where those devices are required and is best used as part of a correctly coordinated surge protection arrangement.
The device is supplied with three 150 mm connection leads for connection to live, neutral and protective earth in a compatible single-phase electrical installation. Its compact enclosure supports surface or recessed mounting within suitable lighting equipment or electrical enclosures. Installation should be carried out by a qualified electrician with the supply safely isolated and in accordance with the manufacturer's instructions.
No. The Finder 7P.32.8.275.0005 is a compact wired surge protection device rather than a plug-in cartridge assembly. When its LED indicator shows that replacement is required, the complete device should be replaced.
The Finder 7P.32.8.275.0005 has a manufacturer-specified ambient operating temperature range of −25 to +80 °C, making it suitable for a wide range of indoor and outdoor lighting environments.
Finder 7P surge protection devices are designed to provide dependable protection for sensitive electrical and electronic equipment. The Finder 7P.32.8.275.0005 combines Type 3 surge protection, varistor and gas discharge tube technology, an IP65-rated enclosure and LED replacement indication to help lighting installers, electrical engineers and maintenance professionals protect valuable LED lighting equipment and improve the reliability of modern lighting installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.