Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.31.8.275.0005 is a compact IP65-rated Type 3 surge protection device for 230 V AC LED lighting systems, featuring 275 V AC maximum continuous operating voltage, 5 kA nominal discharge current, 10 kA maximum discharge current, LED fault indication and two pre-wired connection leads.
£28.79
The Finder 7P.31.8.275.0005 is a compact and reliable Type 3 AC surge protection device (SPD) designed to protect LED lighting installations and sensitive electrical equipment against transient overvoltages. As part of the Finder 7P surge protection series, this single-phase surge arrester provides point-of-use protection against voltage spikes caused by lightning-induced surges and electrical switching events.
Specifically designed for LED luminaires, lighting drivers and electronic equipment, the Finder 7P.31.8.275.0005 features a compact, sealed construction that allows installation close to the equipment requiring protection. Its unipolar L-N protection configuration helps limit damaging voltage transients across the live and neutral conductors, reducing the risk of premature failure of sensitive electronic components.
With a 230 V AC nominal operating voltage, a 275 V AC maximum continuous operating voltage and a 5 kA nominal discharge current, the Finder 7P.31.8.275.0005 is well suited to single-phase lighting circuits. Its IP65 protection rating, integrated LED fault indication and two pre-wired 150 mm connection leads make it particularly suitable for street lighting, commercial LED luminaires, architectural lighting and industrial lighting systems.
Modern LED lighting systems contain sensitive electronic components, including LED drivers, power supplies and control circuits, which can be damaged by transient overvoltages. These disturbances may originate from nearby lightning activity, electrical switching operations or other events on the electrical supply network. The Finder 7P.31.8.275.0005 helps protect connected lighting equipment by limiting the voltage across the live and neutral conductors during transient surge events.
The device uses metal oxide varistor technology, which maintains high electrical resistance during normal operation. When the voltage rises above the varistor's protective threshold, its resistance decreases rapidly, allowing surge current to flow through the protective component and limiting the voltage applied to connected equipment. With a 1.6 kV voltage protection level and 25 ns response time, the Finder 7P.31.8.275.0005 provides rapid suppression of potentially damaging voltage transients.
As a Type 3 surge protection device, this model is intended for installation close to the equipment requiring protection. It is particularly useful as a final stage of surge protection within lighting systems, where upstream Type 1 or Type 2 devices may already provide protection at the main distribution board or electrical sub-distribution level. Correct coordination of surge protection devices helps improve the overall protection of sensitive electrical equipment.
The IP65-rated enclosure makes the Finder 7P.31.8.275.0005 suitable for installation in demanding lighting environments where resistance to dust and moisture is important. Its compact dimensions and two pre-wired 150 mm leads allow convenient integration into LED luminaire housings, electrical junction boxes and other suitable installation locations.
An integrated LED status indicator provides a visual indication when the surge protection device has reached its replacement condition. This allows maintenance personnel to identify when the unit requires attention, helping maintain the intended level of protection for connected lighting equipment. Unlike modular DIN rail surge arresters with replaceable cartridges, the Finder 7P.31.8.275.0005 is a compact wired device intended to be replaced as a complete unit when exhausted.
| Manufacturer | Finder |
|---|---|
| Series | 7P Surge Protection Devices |
| Model | 7P.31.8.275.0005 |
| Alternative part number | 7P3182750005 |
| Product type | AC surge protection device for LED lighting |
| SPD classification | Type 3 / Class III |
| Protection technology | Metal oxide varistor (MOV) |
| Protection configuration | Unipolar L-N |
| Number of poles | 1 |
| Nominal voltage (UN) | 230 V AC |
| Maximum continuous operating voltage (UC) | 275 V AC |
| Nominal discharge current (In) | 5 kA (8/20 µs) |
| Maximum discharge current (Imax) | 10 kA (8/20 µs) |
| Combined-wave open-circuit voltage (UOC) | 10 kV |
| Voltage protection level L-N (Up) | 1.6 kV |
| Response time L-N (ta) | 25 ns |
| Short-circuit current rating (ISSCR) | 1.5 kA rms |
| Maximum upstream overcurrent protection | 16 A gL/gG fuse, B16 A or C10 A circuit breaker |
| Ambient operating temperature | −25 to +80 °C |
| Protection rating | IP65 |
| Installation type | Surface / recessed installation within suitable equipment |
| Connection type | Pre-wired leads |
| Number of connection leads | 2 |
| Connection lead length | 150 mm |
| Status indication | LED replacement indicator |
| Remote signalling | Not included |
| Dimensions (H × W × D) | approx. 39 × 44 × 13 mm |
| Net weight | approx. 28.4 g |
| EAN | 8012823413969 |
| Country of origin | Czechia |
| Applicable standard | EN 61643-11:2012 |
| Primary application | LED lighting and single-phase electronic equipment protection |
The Finder 7P.31.8.275.0005 is a Type 3 AC surge protection device designed to protect LED lighting systems, electronic drivers and sensitive electrical equipment against transient overvoltages caused by lightning-induced surges and electrical switching events.
The device is designed for a 230 V AC nominal supply and has a maximum continuous operating voltage of 275 V AC, making it suitable for standard single-phase mains-powered lighting installations.
The Finder 7P.31.8.275.0005 has a 5 kA nominal discharge current and a 10 kA maximum discharge current, both specified using an 8/20 µs surge waveform. It also has a 10 kV combined-wave open-circuit test voltage.
Yes. The device is particularly suitable for LED street lighting, outdoor luminaires and commercial lighting systems. Its compact construction, IP65 protection rating and pre-wired connections allow installation close to sensitive LED drivers and electronic lighting components.
The IP65 rating means the device enclosure is dust-tight and protected against water jets. This makes it suitable for use in appropriately designed outdoor and industrial lighting installations, subject to the manufacturer's installation requirements.
Yes. The device includes an LED status indicator that signals when the surge protection device requires replacement. This helps maintenance personnel identify an exhausted protection unit during routine inspections.
Both devices are Type 3 surge protectors for 230 V AC single-phase systems. The 7P.31.8.275.0005 provides unipolar L-N protection using two connection leads, while the 7P.32.8.275.0005 uses a 1+1 protection configuration with varistor and gas discharge tube technology and three connection leads for L, N and PE protection.
No. The Finder 7P.31.8.275.0005 is a Type 3 surge protection device intended for point-of-use protection of sensitive equipment. It does not replace Type 1 or Type 2 surge protection where those devices are required. It can be used as part of a coordinated surge protection arrangement.
The device is supplied with two 150 mm connection leads for installation across the live and neutral conductors of a compatible single-phase circuit. Its compact enclosure allows integration into suitable luminaire housings or junction boxes. Installation should be carried out by a qualified electrician with the supply safely isolated and in accordance with the manufacturer's instructions.
No. The Finder 7P.31.8.275.0005 is a compact wired surge protection device rather than a plug-in cartridge assembly. When its LED indicator shows that replacement is required, the complete device should be replaced.
The Finder 7P.31.8.275.0005 is designed to operate in ambient temperatures from −25 to +80 °C, making it suitable for a wide range of indoor and outdoor lighting environments.
Finder 7P surge protection devices are designed to provide dependable protection for sensitive electrical and electronic equipment. The Finder 7P.31.8.275.0005 combines Type 3 surge protection, a compact IP65-rated enclosure, rapid transient suppression and LED fault indication to help lighting installers, electrical engineers and maintenance professionals protect valuable LED lighting equipment and improve the reliability of modern lighting installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.