Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.27.8.275.0020 is a Type 2 surge protection device for single-phase TN-S electrical systems, featuring two varistor protection elements, 275 V AC maximum continuous operating voltage, 20 kA nominal discharge current, 40 kA maximum discharge current and replaceable modules with local visual status indication.
£70.18
The Finder 7P.27.8.275.0020 is a Type 2 surge protection device (SPD) designed to protect single-phase TN-S electrical installations against transient overvoltages caused by lightning-induced surges and electrical switching operations. Part of the Finder 7P Series, this surge arrester features a two-varistor protection arrangement for systems with separate neutral and protective earth conductors.
Designed for 230 V AC single-phase electrical systems, the Finder 7P.27.8.275.0020 has a 275 V AC maximum continuous operating voltage (Uc), a 20 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax), measured using the 8/20 µs surge waveform. Its 1.5 kV voltage protection rating helps reduce the effects of transient overvoltages on connected electrical equipment.
The device incorporates replaceable varistor protection modules and local visual status indication, enabling maintenance personnel to identify when protective elements require replacement. Designed for 35 mm DIN rail mounting, it provides a practical solution for single-phase distribution boards, industrial control panels and commercial electrical installations.
Electrical distribution systems are exposed to transient overvoltages resulting from lightning activity, electrical switching operations and disturbances within the supply network. These short-duration voltage peaks can damage sensitive electronic equipment, interrupt industrial processes and reduce the reliability of electrical installations. The Finder 7P.27.8.275.0020 Type 2 surge arrester is designed to help protect compatible single-phase TN-S systems against these disturbances.
The device uses two metal oxide varistor protection elements to respond rapidly to transient overvoltages and divert surge current through the protective circuit. Its 20 kA nominal discharge current and 40 kA maximum discharge current provide surge handling capability for appropriately selected Type 2 protection applications.
With a 275 V AC maximum continuous operating voltage, the Finder 7P.27.8.275.0020 is intended for compatible 230 V AC single-phase TN-S installations. The protection arrangement is designed for systems with neutral and protective earth conductors, helping limit the voltage stress imposed on connected equipment during transient surge events.
The replaceable varistor cartridges allow protective elements to be renewed when required, while the local visual indicators assist maintenance personnel in checking the device's condition. Its DIN rail mounting arrangement makes it suitable for electrical distribution boards and industrial control enclosures.
Installation consideration: The Finder 7P.27.8.275.0020 is a Type 2 SPD and must be selected according to the electrical system voltage, earthing arrangement, prospective fault current and required surge protection coordination. Any necessary upstream protective device must be selected in accordance with Finder's installation instructions. Installation and servicing should be carried out by a suitably qualified electrician.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Model | 7P.27.8.275.0020 |
| Manufacturer part number | 7P.27.8.275.0020 |
| Product type | Surge protection device |
| SPD classification | Type 2 |
| Electrical system | Single-phase AC |
| Compatible earthing system | TN-S |
| Protection configuration | 1+NPE |
| Number of protection elements | 2 |
| Protection technology | Metal oxide varistor |
| Nominal system voltage | 230 V AC |
| Maximum continuous operating voltage (Uc) | 275 V AC |
| Nominal discharge current (In), 8/20 µs | 20 kA |
| Maximum discharge current (Imax), 8/20 µs | 40 kA |
| Voltage protection rating | 1.5 kV |
| Protection modules | Replaceable varistor cartridges |
| Local status indication | Visual varistor condition indicator |
| Remote signalling contact | No |
| Mounting method | DIN rail |
| DIN rail size | 35 mm |
| Mounting standard | EN 60715 |
| Ingress protection | IP20 |
| Operating ambient temperature | −40 to +80 °C |
| Applicable standard | EN 61643-11:2012 |
| Typical installation position | LPZ 1 to LPZ 2 transition |
| EAN | 8012823398167 |
The Finder 7P.27.8.275.0020 is a Type 2 surge protection device designed to protect compatible single-phase TN-S electrical installations against transient overvoltages caused by induced lightning surges and electrical switching operations.
It is a Type 2 surge protection device, intended for protection against induced lightning surges and switching overvoltages rather than serving as a standalone Type 1 lightning current arrester.
The Finder 7P.27.8.275.0020 is designed for single-phase TN-S electrical systems with separate neutral and protective earth conductors.
The 1+NPE configuration identifies the device's protection arrangement for a single-phase system incorporating line, neutral and protective earth connections. This model uses two varistor protection elements.
The Finder 7P.27.8.275.0020 has a 275 V AC maximum continuous operating voltage (Uc) and is intended for compatible 230 V AC single-phase installations.
The device provides a 20 kA nominal discharge current (In), measured using the 8/20 µs surge waveform.
The Finder 7P.27.8.275.0020 has a 40 kA maximum discharge current (Imax), measured using the 8/20 µs surge waveform.
The device has a specified 1.5 kV voltage protection rating, helping limit transient overvoltages reaching connected equipment.
Yes. The surge arrester features replaceable varistor cartridges, allowing the protective elements to be renewed when required without replacing the complete compatible SPD assembly.
No. The 7P.27.8.275.0020 does not include a remote signalling contact. It provides local visual indication of the condition of its protective elements.
The device is designed for mounting on a 35 mm DIN rail according to EN 60715 inside a suitable electrical distribution enclosure.
The Finder 7P.27.8.275.0020 is intended for single-phase TN-S applications. Three-phase installations generally require an appropriately selected multi-pole SPD matched to the system voltage and earthing arrangement.
Both models are Type 2 surge protection devices for compatible single-phase systems. The 7P.27.8.275.0020 uses two varistor protection elements, while the 7P.22.8.275.0020 uses a varistor and an encapsulated spark-gap protection arrangement. Selection depends on the required network configuration and manufacturer's installation guidance.
The Finder 7P.27.8.275.0020 is designed for operation between −40 and +80 °C.
The device has an IP20 ingress protection rating and is not intended for unprotected outdoor mounting. It should be installed inside an appropriately rated electrical enclosure.
Finder 7P Series surge protection devices provide practical solutions for protecting low-voltage electrical distribution systems against induced lightning surges and switching overvoltages. Combining Type 2 protection, single-phase TN-S compatibility, two-varistor construction, 275 V AC maximum continuous operating voltage, 20 kA nominal discharge current, 40 kA maximum discharge current, replaceable modules and local visual status indication, the Finder 7P.27.8.275.0020 supports electrical contractors, industrial panel builders, facilities engineers and electrical maintenance professionals.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.