Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.27.8.150.1015 Type 2 surge protection device for single-phase TN electrical systems, featuring 1+NPE protection, 150 V AC maximum continuous operating voltage, 15 kA nominal discharge current, replaceable varistor modules and integrated remote signalling.
£99.39
The Finder 7P.27.8.150.1015 is a reliable Type 2 surge protection device (SPD) with remote signalling, designed to protect single-phase TN electrical installations against transient overvoltages caused by induced lightning surges and electrical switching disturbances. As part of the Finder 7P Series surge protection range, this device features a 1+NPE protection configuration with two varistor elements, providing effective surge limitation for low-voltage electrical distribution and industrial control applications.
The device incorporates metal oxide varistor (MOV) technology to divert transient surge currents and limit potentially damaging voltage spikes. Its replaceable varistor modules and integrated visual status indicators simplify inspection and maintenance, while the built-in remote signalling contact enables the protection status to be monitored through compatible alarm, PLC or building management systems.
With a 150 V AC maximum continuous operating voltage, a 15 kA nominal discharge current and a 40 kA maximum discharge current, the Finder 7P.27.8.150.1015 is suitable for compatible single-phase TN electrical installations. Its compact two-module DIN rail-mounted construction, IP20 protection rating and remote monitoring capability make it a practical choice for electrical distribution panels, automation cabinets and industrial control systems.
Transient overvoltages can enter electrical installations through incoming power supplies, distribution wiring and switching operations. Surge protection devices such as the Finder 7P.27.8.150.1015 help protect sensitive equipment by limiting excessive transient voltages and diverting surge currents through a properly designed protective arrangement. Its two-varistor configuration provides surge protection for compatible single-phase TN electrical systems.
The Finder 7P.27.8.150.1015 also supports remote surge protection condition monitoring through its integrated changeover contact. This allows maintenance personnel or compatible supervisory systems to detect a change in SPD status without relying solely on local visual inspection. Combined with replaceable varistor modules and compact DIN rail construction, the device provides a maintainable surge protection solution for industrial automation, electrical distribution and building control installations.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series Surge Protection Devices |
| Model | 7P.27.8.150.1015 |
| Product type | AC surge protection device with remote signalling |
| SPD classification | Type 2 |
| Protection configuration | 1+NPE |
| Protection elements | 2 metal oxide varistors |
| Compatible network | Single-phase TN system with neutral |
| Nominal system voltage (Un) | 120 V AC |
| Maximum continuous operating voltage (Uc) | 150 V AC |
| Nominal discharge current (In, 8/20 µs) | 15 kA |
| Maximum discharge current (Imax, 8/20 µs) | 40 kA |
| Voltage protection level (Up) | 0.74 kV |
| Voltage protection level at 5 kA | 0.6 kV |
| Response time | 25 ns |
| Short-circuit current rating (ISCCR) | 50 kA with specified upstream protection |
| Maximum backup fuse rating | 160 A gL/gG |
| Status indication | Visual Healthy/Replace indicator |
| Remote signalling | Integrated changeover contact |
| Remote contact configuration | 1 CO (SPDT) |
| Remote contact rated voltage | 250 V AC / 30 V DC |
| Remote contact rated current | 0.5 A AC / 0.1 A DC |
| Remote signalling connector | 07P.01 included |
| Replaceable varistor module | 7P.20.8.150.0015 |
| Protection rating | IP20 |
| Operating temperature | −40 to +80 °C |
| Mounting type | 35 mm DIN rail (EN 60715) |
| Module width | 2 modules |
| Solid conductor cross-section | 1–35 mm² |
| Stranded conductor cross-section | 1–25 mm² |
| Conductor stripping length | 12 mm |
| Terminal tightening torque | 3 Nm |
| Applicable standard | EN 61643-11 |
| EAN | 8012823453392 |
The Finder 7P.27.8.150.1015 is a Type 2 surge protection device designed to protect compatible single-phase TN electrical installations against transient overvoltages caused by induced lightning and switching disturbances. It also provides remote signalling for monitoring the condition of its surge protection elements.
The device has a maximum continuous operating voltage of 150 V AC and is intended for compatible electrical systems with a nominal voltage of 120 V AC.
The device provides a 15 kA nominal discharge current and a 40 kA maximum discharge current, both measured using an 8/20 µs surge waveform.
Yes. The Finder 7P.27.8.150.1015 includes an integrated 1 CO (SPDT) remote signalling contact for monitoring varistor status. The contact is rated at 250 V AC / 0.5 A or 30 V DC / 0.1 A, and the 07P.01 signalling connector is included.
Yes. The device incorporates replaceable varistor modules with visual Healthy/Replace status indication. The corresponding replacement varistor module is Finder 7P.20.8.150.0015, allowing maintenance without replacing the complete surge protection assembly.
Finder 7P Series surge protection devices provide dependable transient overvoltage protection for low-voltage electrical installations, combining robust varistor technology, replaceable protection modules and remote status signalling to help electrical engineers, panel builders and automation professionals safeguard equipment and maintain reliable system operation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.