Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.25.8.150.0015 is a four-pole Type 2 surge protection device for compatible three-phase TN-S systems, featuring a 3+N varistor configuration, 150 V AC voltage rating, 20 kA nominal discharge current, replaceable protection modules and DIN rail mounting.
£136.41
The Finder 7P.25.8.150.0015 is a Type 2 four-pole surge protection device (SPD) designed to protect compatible three-phase electrical installations against transient overvoltages caused by lightning-induced disturbances and electrical switching operations. Part of the Finder 7P Series, this surge arrester features a 3+N configuration with four metal oxide varistor protection elements, making it suitable for three-phase TN-S electrical systems with a neutral conductor.
Featuring a 150 V AC voltage rating and a 20 kA nominal discharge current (In), the Finder 7P.25.8.150.0015 provides transient overvoltage protection for appropriately rated low-voltage electrical systems. Its four-varistor construction protects the three phase conductors and neutral-to-earth path, helping reduce the risk of surge-related damage to electrical distribution equipment and sensitive electronic components.
The device incorporates replaceable varistor modules, visual protection status indication, IP20 ingress protection and standard 35 mm DIN rail mounting. This specific .0015 version is supplied without an integrated remote signalling contact, making it suitable for electrical installations where local visual inspection is sufficient.
The Finder 7P.25.8.150.0015 uses four metal oxide varistors to provide transient overvoltage protection in compatible three-phase TN-S electrical installations. Unlike a 3+1 arrangement that uses a gas discharge element between neutral and protective earth, the 7P.25 configuration uses varistor protection for the phase conductors and neutral-to-earth path.
During normal operation, the varistors present high electrical resistance. When a transient overvoltage occurs, their resistance decreases rapidly, allowing surge current to be diverted through the protective earthing system. This helps limit the voltage stress experienced by connected electrical equipment.
With a 20 kA nominal discharge current, the device is designed for Type 2 protection against induced lightning surges and switching disturbances. It is suitable for installation at the boundary between lightning protection zones LPZ 1 and LPZ 2, or other locations selected through an appropriate electrical surge protection assessment.
The Finder 7P.25.8.150.0015 incorporates replaceable varistor cartridges, allowing individual protection elements to be renewed when their operational condition indicates that replacement is required. This modular arrangement helps simplify maintenance and avoids unnecessary replacement of the complete surge protection device.
Visual indicators provide local information about the condition of the protective modules. The 7P.25.8.150.0015 is the version without an integrated remote signalling contact. For installations requiring remote monitoring, the corresponding 7P.25.8.150.1015 variant provides remote status signalling.
The device is designed for installation on a standard 35 mm DIN rail within a suitable electrical enclosure. Before installation, engineers must confirm that the electrical system voltage, TN-S earthing arrangement, surge protection requirements and upstream overcurrent protection are compatible with the selected device. The 150 V AC version must not be substituted for a 275 V AC model without verifying the electrical installation requirements.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Product family | 7P.25 |
| Model | 7P.25.8.150.0015 |
| Product type | Three-phase surge protection device |
| SPD classification | Type 2 |
| Number of poles | 4 |
| Protection configuration | 3+N |
| Compatible earthing arrangement | TN-S |
| Protection technology | Metal oxide varistor (MOV) |
| Number of varistor protection elements | 4 |
| Protection paths | L1–PE, L2–PE, L3–PE and N–PE |
| Rated voltage | 150 V AC |
| Nominal discharge current (In) | 20 kA |
| Nominal discharge current waveform | 8/20 µs |
| Protection modules | Replaceable varistor cartridges |
| Local status indication | Visual varistor condition indicator |
| Remote signalling contact | Not included |
| Operating temperature | −40 to +80 °C |
| Ingress protection | IP20 |
| Mounting | 35 mm DIN rail |
| Mounting standard | EN 60715 |
| Installation | Suitable electrical distribution board or protective enclosure |
| Relevant standard | EN/IEC 61643-11 |
| EAN | 8012823453422 |
| Manufacturer part number | 7P.25.8.150.0015 |
The Finder 7P.25.8.150.0015 is a Type 2 three-phase surge protection device designed to protect compatible TN-S electrical installations against transient overvoltages caused by induced lightning surges and electrical switching operations.
The device uses a 3+N configuration with four metal oxide varistors, providing protection for L1–PE, L2–PE, L3–PE and N–PE in compatible three-phase TN-S electrical systems.
The Finder 7P.25.8.150.0015 has a 150 V AC voltage rating and a 20 kA nominal discharge current (In), specified using an 8/20 µs surge waveform.
No. The 7P.25.8.150.0015 includes local visual varistor status indication but does not have an integrated remote signalling contact. The 7P.25.8.150.1015 is the corresponding variant with remote status signalling.
Yes. The Finder 7P.25.8.150.0015 incorporates replaceable varistor modules. Replacement cartridges must match the manufacturer's specified voltage rating and part number, and maintenance must follow appropriate electrical isolation and safety procedures.
Finder 7P Series surge protection devices provide practical protection against lightning-induced and switching-related transient overvoltages. The 7P.25.8.150.0015 combines Type 2 protection, a four-varistor 3+N configuration, a 150 V AC voltage rating, 20 kA nominal discharge current and replaceable protection modules for compatible three-phase TN-S electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.