Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.23.9.750.0020 is a three-pole Type 2 photovoltaic DC surge protection device for 750 V DC solar installations, featuring three replaceable varistor modules, 20 kA nominal discharge current, 40 kA maximum discharge current, optical status indication and DIN rail mounting.
£85.78
The Finder 7P.23.9.750.0020 is a three-pole Type 2 photovoltaic DC surge protection device (SPD) designed to protect solar power installations against transient overvoltages caused by lightning-induced disturbances and electrical switching events. Part of the Finder 7P Series, this surge arrester incorporates three varistor protection elements and is specifically intended for photovoltaic systems operating at voltages up to 750 V DC.
Featuring a 20 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax), the Finder 7P.23.9.750.0020 provides defined surge-handling capability for photovoltaic DC circuits. Its Type 2 classification makes it suitable for protecting solar inverter inputs, photovoltaic string connections and DC distribution equipment against induced lightning surges and switching transients.
The device incorporates three replaceable metal oxide varistor modules, local visual status indication and a compact DIN rail-mounted housing. This particular variant is supplied without a remote signalling contact, making it suitable for installations where local inspection of the SPD is sufficient. Its IP20 construction and operating temperature range of −40 to +80 °C support installation in appropriately protected electrical enclosures.
Photovoltaic installations are particularly exposed to transient electrical disturbances because solar panels and their associated DC cabling are commonly installed on rooftops or in open outdoor environments. Nearby lightning activity can induce substantial voltage surges in photovoltaic circuits, potentially affecting solar inverters, monitoring equipment and other connected electronic components. The Finder 7P.23.9.750.0020 is designed to help manage these disturbances through its Type 2 varistor-based protection arrangement.
The device incorporates three metal oxide varistors that respond to transient overvoltages by providing a surge current discharge path. Its 20 kA nominal discharge current indicates its capability under standardised 8/20 µs surge testing, while its 40 kA maximum discharge current provides an additional measure of surge-handling performance. These characteristics make it suitable for appropriately designed photovoltaic systems requiring secondary-stage surge protection.
Maintenance is supported by the replaceable varistor cartridges and local optical status indication. These features allow qualified personnel to inspect the condition of the protection elements and replace the appropriate modules when required. As this version does not include remote signalling, routine visual inspection should form part of the installation's maintenance programme.
For correct application, the photovoltaic array's maximum possible open-circuit voltage, including increases caused by low ambient temperatures, must be checked against the manufacturer's permitted operating limits. The SPD must also be coordinated with the installation's earthing arrangements, short-circuit protection, cable routing and other protective devices. The complete installation should follow Finder's technical instructions and the applicable photovoltaic electrical installation standards.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Product family | 7P.23 |
| Model | 7P.23.9.750.0020 |
| Manufacturer part number | 7P.23.9.750.0020 |
| Product type | Photovoltaic DC surge protection device |
| SPD classification | Type 2 |
| Application | Photovoltaic DC installations |
| Photovoltaic voltage rating | 750 V DC |
| Number of poles | 3 |
| Protection arrangement | Three varistors |
| Protection technology | Metal oxide varistor |
| Nominal discharge current (In, 8/20 µs) | 20 kA |
| Maximum discharge current (Imax, 8/20 µs) | 40 kA |
| Remote signalling | No |
| Local status indication | Optical |
| Protective elements | Replaceable varistor modules |
| Mounting | 35 mm DIN rail |
| Modular width | 3 modules |
| Housing width | 53.8 mm |
| Housing height | 89.6 mm |
| Housing depth | 65.9 mm |
| Ingress protection | IP20 |
| Operating temperature | −40 to +80 °C |
| Maximum stated conductor cross-section | 25 mm² |
| EAN | 8012823398099 |
| Country of origin | Czech Republic |
The Finder 7P.23.9.750.0020 is a Type 2 photovoltaic DC surge protection device designed to help protect solar power installations against transient overvoltages caused by induced lightning surges and electrical switching events.
The device is specified for 750 V DC photovoltaic applications. The maximum possible photovoltaic array voltage must be checked against the manufacturer's operating limits before installation.
It is a Type 2 surge protection device, designed primarily to protect against transient surges such as induced lightning disturbances and switching overvoltages. It is not a substitute for Type 1 lightning-current protection where that protection is required.
The Finder 7P.23.9.750.0020 has a nominal discharge current (In) of 20 kA, measured using the standard 8/20 µs surge waveform.
The device has a maximum discharge current (Imax) of 40 kA using the 8/20 µs surge waveform.
The Finder 7P.23.9.750.0020 incorporates three metal oxide varistor protection elements in a three-pole arrangement designed for photovoltaic DC surge protection.
No. This version does not include an integrated remote signalling contact. It provides local optical status indication for inspection of the protective elements.
Both devices are three-pole Type 2 photovoltaic surge protectors for 750 V DC applications with a 20 kA nominal discharge current. The 7P.23.9.750.0020 does not include remote signalling, while the 7P.23.9.750.1020 incorporates a remote status signalling contact.
Yes. The Finder 7P.23.9.750.0020 uses replaceable varistor modules. Replacement should be carried out using the correct manufacturer-approved cartridges after the electrical installation has been safely isolated.
The Finder 7P.23.9.750.0020 is specifically intended for photovoltaic DC applications. It should not be substituted for an AC surge protector unless Finder explicitly approves the intended application.
The device is designed for mounting on a standard 35 mm DIN rail inside a suitable electrical enclosure. Its three-module construction occupies approximately 53.8 mm of rail width.
The specified operating temperature range is −40 to +80 °C, allowing installation in appropriately protected photovoltaic electrical enclosures across a wide range of ambient conditions.
The device has an IP20 ingress protection rating and must be installed inside a suitably protected electrical enclosure. It should not be exposed directly to rain, water spray or excessive dust.
Check the photovoltaic system's maximum open-circuit voltage, including cold-weather conditions, the required surge protection classification, earthing arrangements, prospective short-circuit current, conductor sizing and the manufacturer's installation instructions.
Finder 7P Series photovoltaic surge protection devices provide practical solutions for reducing the effects of transient overvoltages in solar generation systems. Combining Type 2 protection, a 750 V DC photovoltaic application rating, 20 kA nominal discharge current, replaceable varistor modules and compact DIN rail construction, the Finder 7P.23.9.750.0020 supports dependable protection and straightforward maintenance of appropriately designed photovoltaic installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.