Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.23.9.000.1015 is a Type 2 photovoltaic DC surge protection device rated for 1020 V DC, featuring three replaceable varistor modules, 15 kA nominal discharge current, 40 kA maximum discharge current, visual status indication, remote fault signalling and DIN rail mounting.
£113.09
The Finder 7P.23.9.000.1015 is a high-performance Type 2 DC surge protection device (SPD) designed to protect photovoltaic solar installations and sensitive electrical equipment against transient overvoltages. As part of the Finder 7P surge protection series, this three-module surge arrester provides dependable protection against lightning-induced voltage surges and electrical switching transients in photovoltaic power generation systems.
This surge protection device incorporates three replaceable metal oxide varistor (MOV) modules, providing surge protection between the positive and negative DC conductors and protective earth. Its modular construction enables individual varistor cartridges to be replaced when required, reducing maintenance costs and avoiding unnecessary replacement of the complete surge protection assembly.
With a maximum continuous photovoltaic operating voltage of 1020 V DC, a 15 kA nominal discharge current and a 40 kA maximum discharge current, the Finder 7P.23.9.000.1015 is designed for demanding photovoltaic applications. Unlike the 7P.23.9.000.0015 variant, this model includes remote status signalling, allowing surge protection condition monitoring through compatible alarm circuits and automation systems. Its compact 35 mm DIN rail-mounted design makes it suitable for photovoltaic combiner boxes, inverter protection panels and renewable energy electrical distribution systems.
Photovoltaic installations are exposed to transient overvoltages caused by nearby lightning activity, electromagnetic disturbances and electrical switching events. These surges can damage sensitive equipment, including solar inverters, monitoring systems and DC electrical distribution components. The Finder 7P.23.9.000.1015 helps reduce these risks by limiting transient overvoltages and diverting surge currents through the protective earthing system.
The device uses three metal oxide varistor modules arranged in a photovoltaic surge protection configuration. During normal operation, the varistors maintain high electrical resistance. When a transient overvoltage occurs, their resistance decreases rapidly, allowing surge current to be diverted away from connected equipment. The device provides a 4 kV system voltage protection level, helping reduce the effects of potentially damaging voltage transients.
A major advantage of the 7P.23.9.000.1015 is its integrated remote status signalling contact. In addition to the local visual indicators, this feature enables the condition of the surge protection device to be monitored remotely. The changeover contact can be connected to a suitable alarm circuit, monitoring relay, PLC input or building management system, allowing maintenance personnel to identify a protection failure without requiring immediate physical inspection of the electrical cabinet.
The Finder 7P.23.9 Series also features replaceable varistor cartridges. When a module reaches the end of its service life, the compatible Finder 7P.20.9.500.0015 replacement module can be fitted while retaining the serviceable DIN rail-mounted base assembly. This helps simplify maintenance, minimise unnecessary component replacement and maintain effective protection of valuable photovoltaic equipment.
As a Type 2 surge protection device, the Finder 7P.23.9.000.1015 is intended primarily for protection against induced lightning surges and switching overvoltages. Where an installation requires protection against direct lightning currents, appropriate Type 1 or coordinated Type 1+2 surge protection must also be considered in accordance with the electrical installation design.
| Manufacturer | Finder |
|---|---|
| Series | 7P Surge Protection Devices |
| Model | 7P.23.9.000.1015 |
| Alternative part number | 7P2390001015 |
| Product type | Photovoltaic DC surge protection device |
| SPD classification | Type 2 / Class II |
| Protection technology | Metal oxide varistor (MOV) |
| Protection configuration | Three replaceable varistor modules |
| Application | Photovoltaic DC electrical systems |
| Maximum continuous operating voltage (UCPV) | 1020 V DC |
| Maximum continuous operating voltage per module | 510 V DC |
| Nominal discharge current (In) | 15 kA (8/20 µs) |
| Maximum discharge current (Imax) | 40 kA (8/20 µs) |
| System voltage protection level (Up) | 4 kV |
| Voltage protection level (+ to −) | 4 kV |
| Voltage protection level (+/− to PE) | 4 kV |
| Response time (ta) | 25 ns |
| Ambient operating temperature | −40 to +80 °C |
| Protection rating | IP20 |
| Mounting type | 35 mm DIN rail (EN 60715) |
| Construction width | 3 modular spacing units |
| Terminal type | Screw terminals |
| Maximum solid conductor cross-section | 35 mm² |
| Maximum flexible conductor cross-section | 25 mm² |
| Status indication | Mechanical visual indicator |
| Remote signalling | Included |
| Remote contact configuration | 1 CO (SPDT) |
| Remote contact rated current | 0.5 A AC / 0.1 A DC |
| Remote contact rated voltage | 250 V AC / 30 V DC |
| Replacement varistor module | Finder 7P.20.9.500.0015 |
| Approximate width | 53.8 mm |
| EAN | 8012823368498 |
| Applicable standard | EN 50539-11 (photovoltaic SPD series specification) |
The Finder 7P.23.9.000.1015 is a Type 2 photovoltaic DC surge protection device designed to protect solar inverters, photovoltaic distribution equipment and associated electrical components against transient overvoltages caused by lightning-induced surges and electrical switching events.
The device has a maximum continuous photovoltaic operating voltage of 1020 V DC. It is intended for compatible photovoltaic DC installations where the maximum system voltage does not exceed the surge protection device's specified rating.
The Finder 7P.23.9.000.1015 has a 15 kA nominal discharge current and a 40 kA maximum discharge current, specified using an 8/20 µs surge waveform.
Yes. The Finder 7P.23.9.000.1015 includes a remote signalling contact that allows the status of the surge protection device to be monitored through a compatible alarm circuit, PLC input or electrical monitoring system.
Both models are Type 2 photovoltaic surge protection devices rated for 1020 V DC. The main difference is that the 7P.23.9.000.1015 includes remote status signalling, while the 7P.23.9.000.0015 uses local visual indication without the remote signalling feature.
Yes. The Finder 7P.23.9.000.1015 incorporates three replaceable varistor modules. These can be exchanged when exhausted or damaged, allowing the surge protection assembly to be maintained without replacing the complete unit, provided the remaining components are serviceable.
The compatible replacement cartridge is the Finder 7P.20.9.500.0015, a varistor module designed for the corresponding Finder photovoltaic surge protection assembly.
The device incorporates a changeover contact (1 CO / SPDT) that provides an electrical indication of surge protection status. This contact can be connected to a compatible monitoring circuit to provide an alarm when the protection device indicates a fault or exhausted varistor condition.
The surge protection device is designed for installation on a standard 35 mm DIN rail inside a suitable electrical enclosure. It uses screw terminals for electrical connections and should be installed by a qualified electrician in accordance with the manufacturer's instructions and applicable electrical regulations.
Type 1 surge protection devices are designed to handle partial direct lightning currents, while Type 2 surge protection devices protect against induced lightning surges and electrical switching overvoltages. The Finder 7P.23.9.000.1015 is a Type 2 device and can form part of a coordinated surge protection system.
The Finder 7P.23.9.000.1015 is typically installed in photovoltaic combiner boxes, solar inverter DC protection panels and electrical distribution enclosures. Its remote signalling functionality makes it particularly useful in installations requiring centralised fault monitoring.
Finder 7P surge protection devices are designed to provide dependable protection for photovoltaic and industrial electrical installations. The Finder 7P.23.9.000.1015 combines Type 2 DC surge protection, replaceable varistor modules, visual status indication and remote fault signalling to help solar installers, electrical engineers and maintenance professionals protect valuable renewable energy equipment while supporting efficient system monitoring and maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.