Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.23.9.000.0015 is a Type 2 photovoltaic DC surge protection device rated for 1020 V DC, featuring three replaceable varistor modules, 15 kA nominal discharge current per module, 40 kA maximum discharge current per module, visual fault indication and DIN rail mounting.
£89.68
The Finder 7P.23.9.000.0015 is a high-performance Type 2 DC surge protection device (SPD) designed to protect photovoltaic solar installations and sensitive electrical equipment against transient overvoltages. As part of the reliable Finder 7P surge protection series, this three-module surge arrester provides effective protection against lightning-induced voltage surges and electrical switching transients in photovoltaic power generation systems.
This surge protection device incorporates three replaceable metal oxide varistor (MOV) modules, providing coordinated protection across the positive, negative and protective earth connections of a photovoltaic DC installation. Its modular construction allows individual varistor cartridges to be replaced when required, reducing maintenance costs and avoiding the need to replace the complete surge protection assembly.
With a maximum continuous photovoltaic operating voltage of 1020 V DC and a 15 kA nominal discharge current per module, the Finder 7P.23.9.000.0015 is designed for demanding solar energy applications. Its 40 kA maximum discharge current per module, visual fault indication and compact 35 mm DIN rail mounting make it suitable for photovoltaic combiner boxes, inverter protection panels and renewable energy electrical distribution systems.
Photovoltaic installations can be exposed to transient overvoltages caused by nearby lightning strikes, electromagnetic disturbances and electrical switching events. These voltage surges can damage sensitive components such as solar inverters, monitoring equipment and associated electrical control systems. The Finder 7P.23.9.000.0015 helps reduce these risks by limiting transient overvoltages and diverting surge currents through the protective earthing system.
The device uses three metal oxide varistor modules arranged to provide surge protection between the photovoltaic DC conductors and protective earth. During normal operation, the varistors maintain high electrical resistance. When a transient overvoltage occurs, their resistance decreases rapidly, allowing surge current to be diverted away from protected equipment. The device provides a 4 kV system voltage protection level and a 25 ns response time, helping limit the effects of damaging voltage transients.
The Finder 7P.23.9.000.0015 is intended for Type 2 surge protection at the boundary between lightning protection zones LPZ 1 and LPZ 2. It is suitable for photovoltaic systems where protection against induced lightning surges and switching overvoltages is required. The complete installation should be coordinated with other protective devices where necessary, particularly where direct lightning current protection is required.
One of the principal advantages of the Finder 7P.23.9 Series is its replaceable varistor module design. Each protection cartridge incorporates a visual condition indicator, enabling maintenance personnel to identify a failed or exhausted module. The compatible Finder 7P.20.9.500.0015 replacement cartridge can be used to restore the protection capability of the assembly without replacing the complete DIN rail-mounted device, provided the remaining components are serviceable.
| Manufacturer | Finder |
|---|---|
| Series | 7P Surge Protection Devices |
| Model | 7P.23.9.000.0015 |
| Alternative part number | 7P2390000015 |
| Product type | Photovoltaic DC surge protection device |
| SPD classification | Type 2 / Class II |
| Protection technology | Metal oxide varistor (MOV) |
| Protection configuration | Three varistor modules |
| Application | Photovoltaic DC electrical systems |
| Maximum continuous operating voltage (UCPV) | 1020 V DC |
| Maximum continuous operating voltage per module | 510 V DC |
| Nominal discharge current per module (In) | 15 kA (8/20 µs) |
| Maximum discharge current per module (Imax) | 40 kA (8/20 µs) |
| Total discharge current (ITotal) | 40 kA (8/20 µs) |
| Voltage protection level per module (Up) | 2 kV |
| System voltage protection level (+ to −) | 4 kV |
| System voltage protection level (+/− to PE) | 4 kV |
| Response time (ta) | 25 ns |
| Photovoltaic short-circuit current withstand (ISCPV) | 10,000 A |
| Residual current (DC) | <5 µA |
| Ambient operating temperature | −40 to +80 °C |
| Protection rating | IP20 |
| Mounting type | 35 mm DIN rail (EN 60715) |
| Terminal type | Screw terminals |
| Solid conductor capacity | 1–35 mm² |
| Stranded conductor capacity | 1–25 mm² |
| Wire stripping length | 14 mm |
| Terminal tightening torque | 3 Nm |
| Status indication | Mechanical visual indicator |
| Replacement varistor module | Finder 7P.20.9.500.0015 |
| Remote signalling | Not included with this variant |
| Dimensions (H × W × D) | 89.6 × 53.8 × 65.9 mm |
| Net weight | approx. 319.6 g |
| EAN | 8012823398105 |
| Country of origin | Czechia |
| Applicable standards | EN 61643-31 / IEC 61643-31 |
The Finder 7P.23.9.000.0015 is a Type 2 photovoltaic DC surge protection device designed to protect solar inverters, photovoltaic electrical distribution equipment and associated components against transient overvoltages caused by lightning-induced surges and electrical switching events.
The Finder 7P.23.9.000.0015 has a maximum continuous photovoltaic operating voltage of 1020 V DC. Each individual varistor module has a maximum continuous operating voltage of 510 V DC.
The device has a 15 kA nominal discharge current per varistor module and a 40 kA maximum discharge current per module, measured using an 8/20 µs surge waveform. Its specified total discharge current is 40 kA.
Yes. The device is specifically designed for photovoltaic DC surge protection applications and is suitable for installations requiring Type 2 surge protection with a maximum continuous operating voltage of up to 1020 V DC, subject to correct system design and installation requirements.
Yes. The Finder 7P.23.9.000.0015 incorporates three replaceable varistor cartridges. These can be exchanged when exhausted or damaged, allowing the compatible surge protection assembly to be maintained without replacing the complete unit.
The specified replacement cartridge is the Finder 7P.20.9.500.0015, a varistor module rated for 510 V DC with a 15 kA nominal discharge current.
No. The 7P.23.9.000.0015 variant uses a mechanical visual status indicator to show varistor condition and does not include a remote signalling contact. Other variants in the Finder 7P.23.9 Series are available with remote signalling functionality.
The surge protection device is designed for installation on a standard 35 mm DIN rail inside a suitable electrical enclosure. It uses screw terminals for electrical connections and should be installed by a qualified electrician in accordance with the manufacturer's instructions and applicable electrical regulations.
Type 1 surge protection devices are designed to handle partial direct lightning currents, while Type 2 surge protection devices protect against induced lightning surges and electrical switching overvoltages. The Finder 7P.23.9.000.0015 is a Type 2 device and may form part of a coordinated multi-stage surge protection system.
The Finder 7P.23.9.000.0015 is typically installed in photovoltaic combiner boxes, solar inverter DC protection panels and electrical distribution enclosures, providing surge protection for connected renewable energy equipment.
Finder 7P surge protection devices are designed to deliver dependable electrical protection in photovoltaic and industrial installations. The Finder 7P.23.9.000.0015 combines Type 2 DC surge protection, high discharge current capability, replaceable varistor modules and compact DIN rail mounting to help solar installers, electrical engineers and maintenance professionals protect valuable renewable energy equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.