Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.23.8.150.0015 Type 2 three-pole surge protection device for TN-C electrical systems, rated at 150 V AC with 15 kA nominal discharge current, 40 kA maximum discharge current and replaceable varistor modules.
£106.07
The Finder 7P.23.8.150.0015 is a three-pole Type 2 surge protection device (SPD) designed to protect three-phase TN-C electrical installations against transient overvoltages caused by induced lightning surges and electrical switching disturbances. As part of the Finder 7P Series surge protection range, it provides reliable protection for industrial power distribution, electrical control panels and automation equipment operating on compatible 120 V AC systems.
This surge protection device incorporates metal oxide varistor (MOV) technology to divert transient surge currents and limit potentially damaging voltage spikes. Its three-pole configuration provides protection between the three phase conductors and the combined protective earth and neutral (PEN) conductor. Replaceable varistor modules and integrated visual status indicators simplify maintenance and help ensure dependable surge protection throughout the installation's service life.
With a 150 V AC maximum continuous operating voltage, a 15 kA nominal discharge current and a 40 kA maximum discharge current, the Finder 7P.23.8.150.0015 offers effective protection for suitable three-phase TN-C electrical systems. Its compact modular construction, IP20 protection rating and standard 35 mm DIN rail mounting enable straightforward installation inside electrical distribution boards and industrial control enclosures.
Transient overvoltages can enter industrial electrical installations through incoming power supplies, distribution wiring and switching operations. Surge protection devices such as the Finder 7P.23.8.150.0015 help protect sensitive equipment by providing a controlled path for transient surge currents and limiting excessive voltage levels across protected circuits.
The Finder 7P.23.8.150.0015 is specifically designed for three-phase TN-C systems, where the neutral and protective earth functions are combined within a PEN conductor. Its three varistor protection paths provide surge limitation between each phase conductor and PEN. The replaceable modules and visual condition indicators support preventative maintenance, while the compact DIN rail format enables convenient integration into modern electrical distribution and automation panels.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series Surge Protection Devices |
| Model | 7P.23.8.150.0015 |
| Product type | Three-phase AC surge protection device |
| SPD classification | Type 2 |
| Number of poles | 3 |
| Earthing system | TN-C |
| Protection configuration | L1-PEN, L2-PEN, L3-PEN |
| Protection technology | Metal oxide varistor (MOV) |
| Nominal system voltage (Un) | 120 V AC |
| Maximum continuous operating voltage (Uc) | 150 V AC |
| Nominal discharge current (In, 8/20 µs) | 15 kA |
| Maximum discharge current (Imax, 8/20 µs) | 40 kA |
| Voltage protection level (Up) | 0.74 kV |
| Voltage protection level at 5 kA | 0.6 kV |
| Response time | 25 ns |
| Short-circuit current rating (ISCCR) | 50 kA RMS with specified overcurrent protection |
| Maximum backup fuse rating | 160 A gL/gG |
| Status indication | Visual Healthy/Replace indicator |
| Remote signalling | Not included |
| Replaceable varistor module | 7P.20.8.150.0015 |
| Protection rating | IP20 |
| Operating temperature | −40 to +80 °C |
| Mounting type | 35 mm DIN rail (EN 60715) |
| Solid conductor cross-section | 1–35 mm² |
| Stranded conductor cross-section | 1–25 mm² |
| Conductor stripping length | 12 mm |
| Terminal tightening torque | 3 Nm |
| Applicable standard | EN 61643-11:2012 |
| EAN | 8012823453408 |
The Finder 7P.23.8.150.0015 is a three-pole Type 2 surge protection device designed to protect compatible three-phase TN-C electrical installations against transient overvoltages caused by induced lightning and switching disturbances.
The Finder 7P.23.8.150.0015 has a maximum continuous operating voltage of 150 V AC and is intended for compatible electrical systems with a nominal phase-to-PEN voltage of 120 V AC.
The device provides a 15 kA nominal discharge current and a 40 kA maximum discharge current, measured using an 8/20 µs surge waveform.
Yes. The device incorporates replaceable varistor modules with visual Healthy/Replace status indication. The compatible replacement varistor module is Finder 7P.20.8.150.0015.
The Finder 7P.23.8.150.0015 is designed for three-phase TN-C systems, providing varistor surge protection between the L1, L2 and L3 phase conductors and the combined protective earth and neutral (PEN) conductor.
Finder 7P Series surge protection devices provide dependable transient overvoltage protection for industrial electrical installations, combining robust varistor technology, replaceable protection modules and compact DIN rail construction to help electrical engineers and panel builders safeguard equipment and maintain reliable system operation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.