Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.21.8.150.0015 is a single-pole DIN rail-mounted Type 2 surge protection device for compatible 120 V AC electrical systems, featuring 150 V AC maximum continuous operating voltage, 15 kA nominal discharge current, 40 kA maximum discharge current, 0.74 kV voltage protection level, replaceable varistor cartridge and visual protection status indication.
£41.69
The Finder 7P.21.8.150.0015 is a compact, single-pole Type 2 surge protection device (SPD) designed to protect compatible low-voltage AC electrical installations against transient overvoltages. Part of the Finder Series 7P surge protection range, this DIN rail-mounted surge arrester uses metal oxide varistor technology to help safeguard industrial control equipment, electrical power supplies and sensitive electronic components against switching transients and induced lightning surges.
Designed for electrical systems with a nominal voltage of 120 V AC, the Finder 7P.21.8.150.0015 features a 150 V AC maximum continuous operating voltage (Uc), a 15 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax). Its 0.74 kV voltage protection level (Up) helps limit transient voltages reaching connected equipment when the SPD is correctly selected, installed and coordinated with the electrical system.
The device incorporates a replaceable varistor protection cartridge and a visual protection status indicator, allowing maintenance engineers to identify when the protective module requires replacement. Its compact 17.5 mm DIN rail format, IP20 protection rating and wide operating temperature range make it a practical solution for industrial automation panels, low-voltage distribution boards and electrical control cabinets.
Industrial electrical installations can experience transient overvoltages caused by switching operations, inductive loads, power network disturbances and lightning-related events. These short-duration voltage surges may damage electronic components, interrupt automated processes and reduce the reliability of connected electrical equipment. Correctly selected Type 2 surge protection devices help limit these transient voltages and reduce the risk of equipment damage.
The Finder 7P.21.8.150.0015 is designed for compatible 120 V AC electrical systems and provides a 150 V AC maximum continuous operating voltage. This makes it suitable for designated low-voltage AC applications where the surge protection device must be matched to the operating voltage of the electrical supply.
The SPD uses metal oxide varistor technology, which becomes conductive during a transient overvoltage and diverts surge current through the intended protective path. With a 15 kA nominal discharge current, 40 kA maximum discharge current and 0.74 kV voltage protection level, the device offers defined surge-limiting characteristics for properly designed electrical installations.
A practical feature of the Finder 7P.21.8.150.0015 is its replaceable varistor cartridge. The integrated visual indicator enables maintenance personnel to identify whether the protective element remains serviceable or requires replacement. When necessary, the cartridge can be replaced with the designated Finder 7P.20.8.150.0015 module while retaining the existing SPD base, provided the base remains in suitable working condition.
The device mounts onto a standard 35 mm DIN rail and occupies approximately 17.5 mm of panel width. It is intended for installation as part of a coordinated surge protection arrangement, typically at the boundary between lightning protection zones LPZ 1 and LPZ 2. Correct selection of the SPD, upstream protective devices, earthing arrangement and connection lengths is essential for effective protection.
| Manufacturer | Finder |
|---|---|
| Series | 7P Surge Protection Devices |
| Model | 7P.21.8.150.0015 |
| Product type | Type 2 surge protection device |
| SPD classification | Type 2 |
| Number of poles | 1 |
| Protection technology | Metal oxide varistor (MOV) |
| Nominal system voltage (Un) | 120 V AC |
| Maximum continuous operating voltage (Uc) | 150 V AC |
| Nominal discharge current (In) | 15 kA (8/20 µs) |
| Maximum discharge current (Imax) | 40 kA (8/20 µs) |
| Voltage protection level (Up) | 0.74 kV |
| Voltage protection level at 5 kA | 0.6 kV |
| Response time | 25 ns |
| Short-circuit current rating (Isccr) | 50 kA, subject to specified installation conditions |
| Maximum associated backup fuse | 160 A gL/gG, subject to manufacturer's coordination requirements |
| Protection element | Replaceable varistor cartridge |
| Replacement cartridge | Finder 7P.20.8.150.0015 |
| Local status indication | Visual varistor status indicator |
| Integrated remote signalling contact | No |
| Remote signalling version | Finder 7P.21.8.150.1015 |
| Mounting method | DIN rail |
| DIN rail size | 35 mm |
| DIN rail standard | EN 60715 |
| Module width | 17.5 mm nominal |
| Installation space | 1 modular spacing unit |
| Ingress protection | IP20 |
| Operating temperature | −40 to +80 °C |
| Applicable standard | IEC/EN 61643-11 |
| Typical installation location | LPZ 1 / LPZ 2 boundary or higher protection zone |
| EAN / GTIN | 8012823453576 |
The Finder 7P.21.8.150.0015 is a single-pole Type 2 surge protection device designed to protect compatible low-voltage AC electrical installations against transient overvoltages caused by electrical switching and induced lightning surges.
Yes. The 7P.21.8.150.0015 is a complete DIN rail-mounted Type 2 surge protection device incorporating a replaceable varistor protection cartridge and a visual protection status indicator.
The Finder 7P.21.8.150.0015 has a maximum continuous operating voltage (Uc) of 150 V AC and is designed for compatible electrical systems with a nominal voltage of 120 V AC.
The device has a 15 kA nominal discharge current (In), measured using the standard 8/20 µs surge current waveform.
The Finder 7P.21.8.150.0015 has a 40 kA maximum discharge current (Imax), measured using an 8/20 µs surge waveform.
The SPD has a specified 0.74 kV voltage protection level (Up) and a protection level of approximately 0.6 kV at 5 kA, indicating its surge-limiting performance under the relevant test conditions.
No. The 7P.21.8.150.0015 does not include an integrated remote signalling contact. The alternative Finder 7P.21.8.150.1015 version is available with remote signalling capability.
Yes. The Finder 7P.21.8.150.0015 includes a visual varistor status indicator that allows maintenance personnel to determine whether the protection element remains serviceable or requires replacement.
Yes. The replaceable varistor module allows the protective cartridge to be changed while retaining the existing SPD base, provided the base remains serviceable. The designated replacement cartridge is Finder 7P.20.8.150.0015.
The device mounts onto a standard 35 mm DIN rail in accordance with EN 60715. It occupies approximately 17.5 mm of DIN rail width and should be installed inside a suitable electrical enclosure.
No. The Finder 7P.21.8.150.0015 has a maximum continuous operating voltage of 150 V AC and is not suitable for direct installation on a nominal 230 V AC mains supply. A correctly rated SPD must be selected for higher-voltage electrical systems.
The Finder 7P.21.8.150.0015 is designed for ambient operating temperatures from −40 to +80 °C, supporting use in a wide range of industrial electrical installations.
A Type 1 SPD is tested for high-energy lightning impulse currents using a 10/350 µs waveform, while a Type 2 SPD is tested using an 8/20 µs surge waveform and is commonly used to protect against induced lightning surges and switching transients. The Finder 7P.21.8.150.0015 is a Type 2 device.
The device is typically installed in industrial control cabinets, compatible low-voltage AC distribution boards, automation panels and electrical equipment enclosures requiring single-pole Type 2 surge protection.
Finder Series 7P surge protection devices provide practical, modular solutions for protecting electrical installations against transient overvoltages. Combining established metal oxide varistor technology, replaceable protection cartridges and convenient visual status indication, the Finder 7P.21.8.150.0015 offers dependable Type 2 surge protection for compatible low-voltage AC industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.