Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.21.8.130.1015 is a single-pole DIN rail-mounted Type 2 surge protection device for low-voltage AC and DC systems, featuring 130 V AC / 170 V DC maximum continuous operating voltage, 15 kA nominal discharge current, 40 kA maximum discharge current, 0.6 kV voltage protection level, replaceable varistor module and remote signalling contact.
£68.78
The Finder 7P.21.8.130.1015 is a single-pole Type 2 surge protection device (SPD) designed to protect low-voltage AC and DC electrical installations against transient overvoltages. Part of the Finder Series 7P surge protection range, this DIN rail-mounted surge arrester uses metal oxide varistor technology to help protect industrial control equipment, power supplies and sensitive electronic systems from voltage surges caused by switching operations and induced lightning disturbances.
Designed for low-voltage electrical systems, the Finder 7P.21.8.130.1015 features a 130 V AC / 170 V DC maximum continuous operating voltage, a 15 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax). Its 0.6 kV voltage protection level (Up) helps limit transient voltages reaching connected electrical equipment when the SPD is correctly selected and installed.
The device combines a replaceable varistor protection cartridge, an integrated visual status indicator and a remote signalling changeover contact for monitoring the condition of the protective element. Its compact 17.5 mm DIN rail format, IP20 protection rating and wide operating temperature range make it a practical solution for industrial automation panels, electrical distribution boards and low-voltage power systems.
Industrial automation equipment, instrumentation systems and electronic control circuits can be vulnerable to transient overvoltages generated by switching operations, inductive loads and lightning-related disturbances. Even short-duration voltage spikes can damage power supplies, programmable logic controllers and sensitive electronic components. A correctly specified Type 2 surge protection device helps limit these overvoltages and reduce the likelihood of equipment damage.
The Finder 7P.21.8.130.1015 is designed specifically for suitable lower-voltage AC and DC electrical systems. Its 130 V AC / 170 V DC maximum continuous operating voltage makes it appropriate for designated installations where a conventional SPD intended for 230 V AC mains circuits would not provide the required voltage characteristics.
The device uses metal oxide varistor technology, which responds to a transient overvoltage by becoming conductive and diverting surge current through the intended protective path. Its 15 kA nominal discharge current, 40 kA maximum discharge current and 0.6 kV voltage protection level provide defined surge protection characteristics for correctly designed low-voltage installations.
A key benefit of the Finder 7P.21.8.130.1015 is its replaceable varistor cartridge. The integrated visual indicator enables maintenance personnel to check the condition of the protection element, while the remote signalling changeover contact allows the SPD status to be incorporated into a suitable monitoring or alarm system. This is particularly useful in industrial installations where electrical equipment may operate continuously or be located in unattended cabinets.
The device mounts directly onto a standard 35 mm DIN rail and occupies approximately 17.5 mm of panel width. For effective protection, the SPD must be correctly coordinated with the electrical supply, earthing arrangement, upstream protective devices and any other surge protection stages. Installation should be undertaken by a qualified electrical professional in accordance with Finder's instructions and applicable electrical installation regulations.
| Manufacturer | Finder |
|---|---|
| Series | 7P Surge Protection Devices |
| Model | 7P.21.8.130.1015 |
| Product type | Type 2 surge protection device |
| SPD classification | Type 2 |
| Number of poles | 1 |
| Protection technology | Metal oxide varistor (MOV) |
| Nominal AC system voltage | 110 V AC |
| Nominal DC system voltage | 125 V DC |
| Maximum continuous operating voltage (Uc), AC | 130 V AC |
| Maximum continuous operating voltage (Uc), DC | 170 V DC |
| Nominal discharge current (In) | 15 kA (8/20 µs) |
| Maximum discharge current (Imax) | 40 kA (8/20 µs) |
| Voltage protection level (Up) | 0.6 kV |
| Short-circuit current rating (Isccr) | 50 kA |
| Protection element | Replaceable varistor cartridge |
| Local status indication | Optical protection status indicator |
| Remote signalling | Yes |
| Remote signalling contact type | SPDT changeover contact |
| Mounting method | DIN rail |
| DIN rail size | 35 mm |
| DIN rail standard | EN 60715 |
| Module width | 17.5 mm nominal |
| Installation space | 1 modular spacing unit |
| Ingress protection | IP20 |
| Operating temperature | −40 to +80 °C |
| Applicable standard | IEC/EN 61643-11 |
| Typical installation location | LPZ 1 / LPZ 2 boundary or higher protection zone |
| EAN / GTIN | 8012823378527 |
The Finder 7P.21.8.130.1015 is a single-pole Type 2 surge protection device designed to protect compatible low-voltage AC and DC electrical installations against transient overvoltages caused by electrical switching and induced lightning surges.
Yes. The 7P.21.8.130.1015 is a complete DIN rail-mounted Type 2 surge protection device with a replaceable varistor cartridge, visual protection status indication and a remote signalling contact.
The Finder 7P.21.8.130.1015 has a maximum continuous operating voltage (Uc) of 130 V AC or 170 V DC. The device must be selected according to the actual system voltage and electrical installation arrangement.
The SPD has a 15 kA nominal discharge current (In), measured using the standard 8/20 µs surge current waveform.
The Finder 7P.21.8.130.1015 has a 40 kA maximum discharge current (Imax), measured using an 8/20 µs surge waveform.
The SPD has a specified 0.6 kV voltage protection level (Up). This indicates its surge voltage limitation performance under the relevant standard test conditions.
Yes. This model includes an SPDT changeover contact that can be connected to a suitable external monitoring or alarm system to indicate the status of the surge protection device.
Yes. The Finder 7P.21.8.130.1015 includes an optical status indicator that allows maintenance personnel to determine whether the varistor protection element remains serviceable or requires replacement.
Yes. The replaceable varistor cartridge allows the protective module to be changed while retaining the existing SPD base, provided the base remains serviceable and the correct Finder replacement cartridge is used.
The device is designed for mounting onto a standard 35 mm DIN rail in accordance with EN 60715. It occupies approximately 17.5 mm of DIN rail width and should be installed inside a suitable electrical enclosure.
No. The Finder 7P.21.8.130.1015 has a maximum continuous AC operating voltage of 130 V AC and is not intended for direct use on a nominal 230 V AC mains supply. A correctly rated SPD must be selected for higher-voltage installations.
The Finder 7P.21.8.130.1015 is designed for ambient operating temperatures from −40 to +80 °C, making it suitable for a wide range of industrial electrical installations.
A Type 1 SPD is tested for high-energy lightning impulse currents using a 10/350 µs waveform, while a Type 2 SPD is designed for transient overvoltages and is tested using an 8/20 µs surge waveform. The Finder 7P.21.8.130.1015 is a Type 2 device intended for appropriately coordinated surge protection installations.
The device is typically installed in industrial control cabinets, low-voltage AC and DC distribution boards, automation panels and electrical equipment enclosures requiring single-pole Type 2 surge protection and remote status monitoring.
Finder Series 7P surge protection devices provide practical, modular solutions for protecting electrical installations against transient overvoltages. Combining metal oxide varistor technology, replaceable protection cartridges, visual status indication and remote signalling capability, the Finder 7P.21.8.130.1015 offers a dependable surge protection solution for compatible low-voltage AC and DC industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.