Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.20.8.440.0020 is a replacement varistor cartridge for compatible Finder 7P Series Type 2 surge protection devices, rated for 440 V AC or 585 V DC maximum continuous operating voltage with 20 kA nominal discharge current and 40 kA maximum discharge current.
£43.48
The Finder 7P.20.8.440.0020 is a genuine replacement varistor cartridge for Finder 7P Series Type 2 surge protection devices (SPDs). Designed for use with compatible Finder 7P.21.8.440.x020 surge arresters, this plug-in module enables electrical maintenance professionals to restore surge protection without replacing the complete SPD assembly.
Featuring a 440 V AC / 585 V DC maximum continuous operating voltage, the Finder 7P.20.8.440.0020 provides a 20 kA nominal discharge current and 40 kA maximum discharge current, both measured using the 8/20 µs surge waveform. Its metal oxide varistor technology provides rapid protection against transient overvoltages associated with electrical switching operations and induced lightning surges.
With a 1.9 kV voltage protection level, 25 ns response time and compact single-module construction, this replacement cartridge provides a practical maintenance solution for compatible surge protection installations. Its plug-in design supports efficient replacement of an end-of-life varistor module while retaining the existing SPD base and wiring.
Electrical distribution systems are exposed to transient overvoltages caused by lightning activity, switching operations and disturbances within the supply network. Surge protection devices use protective components such as metal oxide varistors to divert surge currents and limit the voltage reaching connected equipment. Repeated surge exposure can eventually cause these components to deteriorate, making replacement necessary to maintain the intended level of protection.
The Finder 7P.20.8.440.0020 replacement varistor cartridge is designed to restore the protective function of compatible Finder 7P.21.8.440.x020 Type 2 surge arresters. Its 20 kA nominal discharge current, 40 kA maximum discharge current and 1.9 kV voltage protection level support protection against induced lightning surges and electrical switching transients.
The cartridge's 440 V AC maximum continuous operating voltage makes it suitable for the specified Finder Type 2 SPD range used in compatible three-phase 400 V AC installations. The corresponding 585 V DC rating may also support suitable DC applications where the complete protective assembly is approved for the intended system.
Its plug-in construction allows the protective cartridge to be replaced while retaining the compatible SPD base. The complete assembly provides visual indication of the varistor's condition, helping maintenance personnel identify when replacement is required.
Important installation consideration: The Finder 7P.20.8.440.0020 is a replacement cartridge rather than a complete standalone surge protection device. It must only be installed in a compatible Finder SPD base. The electrical installation must be safely isolated before replacement, and the manufacturer's instructions and applicable electrical regulations must be followed.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Model | 7P.20.8.440.0020 |
| Manufacturer part number | 7P.20.8.440.0020 |
| Alternative product code | 7P2084400020 |
| Product type | Replacement surge protection cartridge |
| Accessory category | Replacement varistor module for surge arrester |
| Protection technology | Metal oxide varistor |
| SPD application | Type 2 surge protection |
| Compatible SPD family | Finder 7P.21.8.440.x020 |
| Nominal AC system voltage of compatible SPD | 400 V AC |
| Maximum continuous operating voltage (Uc), AC | 440 V AC |
| Maximum continuous operating voltage (Uc), DC | 585 V DC |
| Nominal discharge current (In), 8/20 µs | 20 kA |
| Maximum discharge current (Imax), 8/20 µs | 40 kA |
| Voltage protection level (Up) | 1.9 kV |
| Voltage protection level at 5 kA (Up5) | 1.5 kV |
| Response time | 25 ns |
| Mounting method | Plug-in cartridge for compatible SPD base |
| Modular construction | Single replacement module |
| Module height | 48.3 mm |
| Module width | 17.4 mm |
| Module depth | 45 mm |
| Net weight | 54.5 g |
| Operating ambient temperature | −40 to +80 °C |
| Ingress protection | IP20 |
| Applicable SPD standard | EN 61643-11 |
| Country of origin | Czech Republic |
| EAN | 8012823422282 |
The Finder 7P.20.8.440.0020 is a replacement varistor cartridge for compatible Finder 7P Series Type 2 surge protection devices. It allows the protective module to be replaced without changing the complete SPD assembly.
No. It is a replacement surge protection cartridge designed for installation into a compatible Finder SPD base. It is not intended for standalone electrical installation.
The Finder 7P.20.8.440.0020 is the specified replacement varistor cartridge for the Finder 7P.21.8.440.x020 Type 2 surge protection range. Compatibility should be checked against the exact installed SPD model.
The cartridge has a maximum continuous operating voltage of 440 V AC or 585 V DC, subject to compatibility with the complete surge protection assembly.
The module provides a 20 kA nominal discharge current (In), measured using the 8/20 µs surge waveform.
The Finder 7P.20.8.440.0020 has a 40 kA maximum discharge current (Imax), measured using the 8/20 µs waveform.
The module has a specified 1.9 kV voltage protection level (Up) and a 1.5 kV protection level at 5 kA.
The cartridge uses metal oxide varistor technology to respond to transient overvoltages and divert surge current within a compatible Type 2 surge protection assembly.
The module has a specified 25 ns response time, providing rapid varistor-based protection against transient overvoltage events.
The cartridge is inserted into a compatible Finder 7P Series SPD base. Before replacement, the electrical installation must be safely isolated and the manufacturer's installation instructions followed.
The cartridge has a specified 585 V DC maximum continuous operating voltage. However, suitability for a particular DC application depends on the complete SPD assembly and the manufacturer's installation requirements.
The replacement cartridge measures approximately 48.3 mm high, 17.4 mm wide and 45 mm deep, with a net weight of approximately 54.5 g.
The Finder 7P.20.8.440.0020 is specified for operation between −40 and +80 °C.
The module has an IP20 ingress protection rating and is not intended for unprotected outdoor mounting. It must be installed in a compatible SPD assembly within an appropriately rated electrical enclosure.
Both are replacement varistor cartridges for compatible Finder Type 2 surge protection devices, with 20 kA nominal discharge current and 40 kA maximum discharge current. The 7P.20.8.440.0020 is rated for 440 V AC / 585 V DC and has a 1.9 kV voltage protection level, while the 7P.20.8.275.0020 is rated for 275 V AC / 350 V DC and has a lower voltage protection level. The modules are not interchangeable unless specifically approved for the installed SPD assembly.
The cartridge should be replaced when the compatible Finder SPD indicates that its varistor module has reached the end of its service life, or when replacement is otherwise required following inspection in accordance with the manufacturer's instructions.
Finder 7P Series replacement modules support efficient servicing of electrical surge protection systems in industrial, commercial and infrastructure applications. Combining genuine Finder compatibility, Type 2 varistor protection, 440 V AC / 585 V DC maximum continuous operating voltage, 20 kA nominal discharge current, 40 kA maximum discharge current and convenient plug-in replacement, the Finder 7P.20.8.440.0020 provides a practical maintenance solution for electrical contractors, industrial panel builders, facilities engineers and electrical maintenance professionals.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.