Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.20.8.275.0020 is a replacement varistor cartridge for compatible Finder 7P Series Type 2 surge protection devices, rated for 275 V AC or 350 V DC maximum continuous operating voltage with 20 kA nominal discharge current and 40 kA maximum discharge current.
£39.13
The Finder 7P.20.8.275.0020 is a genuine replacement varistor cartridge for Finder 7P Series Type 2 surge protection devices (SPDs). Designed to restore the protective function of compatible surge arresters, this plug-in module provides an efficient maintenance solution for electrical distribution systems exposed to switching transients and lightning-induced overvoltages.
Featuring a 275 V AC / 350 V DC maximum continuous operating voltage, the Finder 7P.20.8.275.0020 delivers a 20 kA nominal discharge current and 40 kA maximum discharge current, both specified using the 8/20 µs surge waveform. Its varistor-based protection technology helps limit transient overvoltages reaching connected electrical equipment.
With a 1.2 kV voltage protection level, fast response characteristics and a compact plug-in design, this replacement module supports convenient maintenance of compatible Finder 7P surge protection assemblies. Rather than replacing the complete surge arrester, maintenance personnel can replace the appropriate cartridge, helping reduce servicing time and unnecessary component replacement.
Surge protection devices help safeguard electrical installations against transient overvoltages generated by lightning activity, switching operations and disturbances in electrical distribution networks. Over time, repeated surge exposure can cause protective varistor elements to deteriorate. The Finder 7P.20.8.275.0020 replacement varistor module provides a practical way to restore the protective capability of compatible Finder 7P Series surge arresters when the original cartridge requires replacement.
The module uses metal oxide varistor technology to respond rapidly to excessive voltage and divert surge current through the protective circuit. Its 20 kA nominal discharge current, 40 kA maximum discharge current and 1.2 kV voltage protection level make it suitable for compatible Type 2 surge protection applications.
Designed as a plug-in replacement cartridge, the Finder 7P.20.8.275.0020 allows maintenance personnel to replace a worn protective module while retaining the compatible SPD base. This approach supports efficient servicing of electrical distribution boards, industrial control cabinets and building electrical infrastructure.
Important installation consideration: The Finder 7P.20.8.275.0020 is a replacement cartridge, not a complete standalone surge protection device. It must be installed in a compatible Finder SPD base, and its suitability must be confirmed against the existing surge arrester model. Electrical isolation, safe replacement procedures and manufacturer installation instructions must be followed.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Model | 7P.20.8.275.0020 |
| Manufacturer part number | 7P.20.8.275.0020 |
| Product type | Replacement surge protection cartridge |
| Accessory category | Replacement module for surge arrester |
| Protection technology | Metal oxide varistor |
| SPD application | Type 2 surge protection |
| Maximum continuous operating voltage (Uc), AC | 275 V AC |
| Maximum continuous operating voltage (Uc), DC | 350 V DC |
| Nominal discharge current (In), 8/20 µs | 20 kA |
| Maximum discharge current (Imax), 8/20 µs | 40 kA |
| Voltage protection level (Up) | 1.2 kV |
| Response time | 25 ns |
| Maximum overcurrent protection for compatible assemblies | 160 A gL/gG |
| Mounting method | Plug-in socket / compatible SPD base |
| Modular width | 1 module |
| Module height | 48.3 mm |
| Module width | 17.4 mm |
| Module depth | 45 mm |
| Net weight | 47.7 g |
| Operating ambient temperature | −40 to +80 °C |
| Ingress protection | IP20 |
| Installation | Compatible Finder 7P surge protection assembly |
| Country of origin | Czech Republic |
| EAN | 8012823334721 |
The Finder 7P.20.8.275.0020 is a replacement varistor cartridge designed for compatible Finder 7P Series Type 2 surge protection devices. It allows the protective module to be replaced without changing the complete compatible SPD assembly.
No. It is a replacement surge protection cartridge intended for installation into a compatible Finder SPD base. It is not designed for standalone electrical installation.
The module uses metal oxide varistor technology to limit transient overvoltages and divert surge current in compatible Type 2 surge protection assemblies.
The cartridge has a 20 kA nominal discharge current (In), measured using the 8/20 µs surge waveform.
The Finder 7P.20.8.275.0020 has a 40 kA maximum discharge current (Imax), measured using the 8/20 µs waveform.
The module is rated for a maximum continuous operating voltage of 275 V AC or 350 V DC, subject to compatibility with the complete surge protection assembly.
The specified voltage protection level is 1.2 kV, helping limit transient overvoltages in compatible surge protection applications.
The module uses a plug-in cartridge mounting arrangement and is inserted into a compatible Finder 7P Series surge protection base. Installation or replacement must be performed with the electrical supply safely isolated.
The cartridge has a specified 350 V DC maximum continuous operating voltage. However, suitability for a particular DC installation depends on the complete SPD assembly and the manufacturer's application requirements.
The Finder 7P.20.8.275.0020 measures approximately 48.3 mm high, 17.4 mm wide and 45 mm deep.
The Finder 7P.20.8.275.0020 is designed for operation between −40 and +80 °C.
The cartridge has an IP20 ingress protection rating and must be installed inside a compatible SPD assembly within an appropriately rated electrical enclosure. It is not intended for unprotected outdoor mounting.
The cartridge should be replaced when the compatible Finder surge arrester indicates that its protective module has reached the end of its service life, or when replacement is otherwise required following inspection in accordance with the manufacturer's instructions.
The 7P.20.8.275.0020 is a varistor replacement module rated for 275 V AC, while the 7P.20.1.000.0020 is a spark-gap replacement module. They perform different protective functions and must only be used in the corresponding positions of compatible Finder surge protection assemblies.
Finder 7P Series replacement modules support efficient maintenance of electrical surge protection systems in industrial, commercial and infrastructure applications. Combining genuine Finder compatibility, Type 2 varistor protection, 20 kA nominal discharge current, 40 kA maximum discharge current and convenient plug-in replacement, the Finder 7P.20.8.275.0020 provides a practical maintenance solution for electrical contractors, industrial panel builders, facilities engineers and electrical maintenance professionals.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.