Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.20.8.150.0015 is a replaceable metal oxide varistor surge protection cartridge rated at 150 V AC with a 15 kA nominal discharge current, IP20 protection and a plug-in design for compatible Finder 7P Series surge protection devices.
£37.02
The Finder 7P.20.8.150.0015 is a replaceable metal oxide varistor (MOV) surge protection cartridge designed for compatible Finder 7P Series surge protection devices (SPDs). This plug-in module provides a convenient replacement solution for maintaining protection against transient overvoltages caused by electrical switching operations and lightning-induced disturbances.
Featuring a 150 V AC voltage rating and a 15 kA nominal discharge current (In), the Finder 7P.20.8.150.0015 is designed for use within matching surge protection assemblies. Its varistor technology responds rapidly to transient overvoltages, helping divert surge currents through the complete SPD installation and limit voltage stress on connected electrical equipment.
The cartridge features IP20 protection, an operating temperature range of −40 to +80 °C and a removable plug-in construction. As a replacement module rather than a complete surge arrester, it must be installed in a compatible Finder SPD base with the correct electrical ratings and protection configuration.
The Finder 7P.20.8.150.0015 uses metal oxide varistor technology to provide transient overvoltage limitation within a compatible surge protection assembly. During normal operation, a varistor presents relatively high electrical resistance. When a sufficiently high transient voltage occurs, its resistance decreases rapidly, allowing surge current to be diverted through the SPD's protective circuit.
With a 15 kA nominal discharge current, the replacement cartridge is suitable for matching surge protection applications requiring the specified discharge capability. The performance of the complete installation depends on the SPD base, earthing arrangement, conductor routing and coordination with other protective devices.
Varistor-based surge protection is commonly used to protect electrical equipment from transient disturbances that can affect power supplies, control electronics, automation equipment and electrical distribution systems.
Surge protection modules may deteriorate after repeated exposure to electrical transients or a sufficiently severe surge event. The Finder 7P.20.8.150.0015 provides a replacement solution for compatible Finder surge protection devices, allowing the protective varistor element to be renewed without replacing the complete SPD assembly.
This modular approach can simplify electrical maintenance, particularly in distribution boards and control cabinets where surge protection devices form part of a preventative maintenance programme. Replacing the correct cartridge helps maintain the intended protection performance of the installed system.
Before ordering or installing this module, verify that the existing SPD specifically requires Finder replacement cartridge 7P.20.8.150.0015. Cartridges with different voltage ratings or part numbers must not be treated as interchangeable without manufacturer confirmation. Replacement should be performed by a competent person using appropriate electrical isolation procedures.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Product family | 7P.20 |
| Model | 7P.20.8.150.0015 |
| Product type | Replacement surge protection cartridge |
| Component type | Replaceable varistor module |
| Protection technology | Metal oxide varistor (MOV) |
| Rated voltage | 150 V AC |
| Nominal discharge current (In) | 15 kA |
| Nominal discharge current waveform | 8/20 µs |
| Operating temperature | −40 to +80 °C |
| Ingress protection | IP20 |
| Mounting arrangement | Plug-in module for compatible Finder SPD base |
| Replacement method | Removable cartridge |
| Primary function | Transient overvoltage protection |
| Application | Maintenance of compatible low-voltage surge protection devices |
| EAN | 8012823453446 |
| Manufacturer part number | 7P.20.8.150.0015 |
The Finder 7P.20.8.150.0015 is a replacement metal oxide varistor cartridge for compatible Finder 7P Series surge protection devices. It is used to replace a protective module that has deteriorated or reached the end of its service life.
The Finder 7P.20.8.150.0015 has a 150 V AC voltage rating. Compatibility with the installed surge protection device and electrical system must be verified before replacement.
The cartridge has a 15 kA nominal discharge current (In), specified using an 8/20 µs surge current waveform.
No. The 7P.20.8.150.0015 is a replacement cartridge, not a complete DIN rail surge protection device. It must be inserted into a compatible Finder SPD base or surge arrester assembly.
Confirm the existing SPD model, required replacement cartridge part number, voltage rating and installation requirements. Replacement must follow Finder's instructions and appropriate electrical safety procedures.
Finder 7P Series replacement cartridges support the maintenance of surge protection systems in industrial and commercial electrical installations. The 7P.20.8.150.0015 combines a 150 V AC rating, 15 kA nominal discharge current, metal oxide varistor technology and convenient plug-in construction for compatible Finder surge protection assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.