Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.20.8.130.0015 is a replaceable varistor surge protection cartridge for compatible Finder 7P Series SPDs, rated for 130 V AC or 170 V DC maximum continuous operating voltage with 15 kA nominal discharge current, 40 kA maximum discharge current and IP20 protection.
£40.94
The Finder 7P.20.8.130.0015 is a replaceable varistor surge protection cartridge designed for compatible Finder 7P Series surge protection devices (SPDs). This plug-in replacement module provides dependable protection against transient overvoltages caused by electrical switching operations and lightning-induced disturbances, helping maintain the performance of electrical surge protection systems.
Featuring a 130 V AC / 170 V DC maximum continuous operating voltage (Uc), a 15 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax), the Finder 7P.20.8.130.0015 is designed to absorb and divert high-energy transient surge currents. Its 0.6 kV voltage protection level (Up) helps limit the residual voltage reaching connected electrical equipment.
As a replacement protection module rather than a complete DIN rail surge arrester, the 7P.20.8.130.0015 fits into a compatible Finder SPD base. Its plug-in design simplifies maintenance by allowing a worn or damaged varistor cartridge to be replaced without replacing the complete surge protection assembly.
The Finder 7P.20.8.130.0015 uses metal oxide varistor technology to protect compatible electrical circuits against transient overvoltages. During normal operation, the varistor presents high electrical resistance. When a sufficiently high transient voltage occurs, its resistance decreases rapidly, allowing surge current to be diverted through the surge protection assembly.
With a 15 kA nominal discharge current and a 40 kA maximum discharge current, the cartridge is designed to withstand substantial transient surge events. Its 0.6 kV voltage protection level at nominal discharge current helps reduce the voltage stress experienced by downstream equipment.
The 25 ns response time supports rapid protection against short-duration electrical transients. Actual equipment protection depends on the complete SPD assembly, installation wiring, earthing arrangement and coordination with other surge protection devices.
Surge protection components can deteriorate over time as they absorb transient energy. The Finder 7P.20.8.130.0015 provides a convenient replacement option for compatible Finder surge arresters, allowing the protective varistor module to be renewed while retaining the existing SPD base.
This modular design helps reduce maintenance time and unnecessary component replacement. It is particularly useful in electrical distribution boards and industrial control cabinets where surge protection equipment is inspected as part of a planned maintenance programme.
Before ordering, verify that the installed SPD requires the 130 V AC / 170 V DC varistor cartridge and that its exact replacement code is 7P.20.8.130.0015. The module must not be substituted for a different voltage rating or installed as a standalone surge protection device.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Product family | 7P.20 |
| Model | 7P.20.8.130.0015 |
| Product type | Replacement surge protection cartridge |
| Component type | Replaceable varistor module |
| Protection technology | Metal oxide varistor (MOV) |
| Nominal voltage (Un) | 110 V AC / 125 V DC |
| Maximum continuous operating voltage (Uc) | 130 V AC / 170 V DC |
| Nominal discharge current (In), 8/20 µs | 15 kA |
| Maximum discharge current (Imax), 8/20 µs | 40 kA |
| Voltage protection level at 5 kA (Up5) | 0.45 kV |
| Voltage protection level at In (Up) | 0.6 kV |
| Response time | 25 ns |
| Operating temperature | −40 to +80 °C |
| Protection rating | IP20 |
| Mounting | Plug-in connection to compatible SPD base |
| Replacement method | Removable cartridge |
| Application | Maintenance of compatible low-voltage surge protection devices |
| EAN | 8012823396224 |
| Manufacturer part number | 7P.20.8.130.0015 |
The Finder 7P.20.8.130.0015 is a replacement varistor cartridge for compatible Finder 7P Series surge protection devices. It is used to restore the surge protection function when an existing cartridge requires replacement.
The cartridge has a nominal voltage designation of 110 V AC / 125 V DC and a maximum continuous operating voltage of 130 V AC / 170 V DC.
The Finder 7P.20.8.130.0015 provides a 15 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax), both specified using an 8/20 µs surge waveform.
No. The 7P.20.8.130.0015 is a replacement cartridge, not a complete DIN rail surge protection device. It must be inserted into a compatible Finder SPD base or surge arrester assembly.
Confirm the existing SPD model, the required replacement module code and the correct voltage rating. Replacement should follow Finder's instructions and appropriate electrical isolation and safety procedures.
Finder 7P Series replacement cartridges help maintain dependable surge protection in industrial and commercial electrical installations. The 7P.20.8.130.0015 combines 130 V AC / 170 V DC maximum continuous operating voltage, 15 kA nominal discharge current, 40 kA maximum discharge current and a convenient plug-in varistor design for compatible Finder surge protection assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.