Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.20.8.075.0015 is a plug-in Type 2 surge protection replacement varistor module with 75 V AC / 100 V DC maximum continuous operating voltage, 15 kA nominal discharge current, 40 kA maximum discharge current and 0.4 kV voltage protection level for compatible Finder Series 7P low-voltage surge protection assemblies.
£40.13
The Finder 7P.20.8.075.0015 is a specialist plug-in varistor surge protection replacement module designed for compatible Finder Series 7P Type 2 surge protection devices (SPDs). Engineered for low-voltage AC and DC electrical installations, this replacement cartridge helps maintain protection against transient overvoltages caused by electrical switching operations, induced lightning surges and other power system disturbances.
Featuring metal oxide varistor (MOV) protection technology, the Finder 7P.20.8.075.0015 provides a 15 kA nominal discharge current (In) and 40 kA maximum discharge current (Imax), measured using an 8/20 µs surge waveform. Its low 0.4 kV voltage protection level (Up) makes it particularly suitable for compatible low-voltage installations where effective limitation of transient overvoltages is essential.
With a maximum continuous operating voltage of 75 V AC or 100 V DC, the Finder 7P.20.8.075.0015 is designed for use with compatible Finder 7P.21.8.075.1015 Type 2 surge protection assemblies. Its compact plug-in construction, IP20 protection rating and wide operating temperature range make it a practical maintenance solution for industrial control systems, electrical distribution equipment and low-voltage power supplies.
Industrial electrical installations frequently contain sensitive electronic equipment operating from low-voltage AC and DC power supplies. Programmable logic controllers, instrumentation circuits, communication equipment and electronic control modules can be vulnerable to transient overvoltages caused by switching operations, inductive loads and lightning-induced disturbances.
The Finder 7P.20.8.075.0015 varistor replacement module is designed to help maintain surge protection in compatible low-voltage electrical systems. Its 75 V AC / 100 V DC maximum continuous operating voltage makes it suitable for designated surge protection assemblies serving lower-voltage circuits where standard mains-voltage SPD modules would be inappropriate.
The module uses metal oxide varistor technology, which responds to transient overvoltages by becoming conductive and diverting surge current through the intended protective path. With a 15 kA nominal discharge current, 40 kA maximum discharge current and 0.4 kV voltage protection level, it provides specified surge-limiting performance within compatible Finder Type 2 SPD assemblies.
The plug-in cartridge design allows a worn or exhausted protection module to be replaced without removing the complete surge protection assembly, provided the base remains serviceable. This helps reduce maintenance time and supports continued protection of industrial electrical equipment.
The Finder 7P.20.8.075.0015 is intended for use with the Finder 7P.21.8.075.1015 surge protection assembly. Replacement should be performed by a qualified electrical professional, with the installed SPD model, system voltage, earthing arrangement and manufacturer's instructions checked before installation.
| Manufacturer | Finder |
|---|---|
| Series | 7P Surge Protection Devices |
| Model | 7P.20.8.075.0015 |
| Product type | Varistor surge protection replacement module |
| Protection technology | Metal oxide varistor (MOV) |
| Associated SPD classification | Type 2 |
| Module configuration | Plug-in replacement cartridge |
| Nominal system voltage | 60 V AC / 60 V DC |
| Maximum continuous operating voltage (Uc) | 75 V AC / 100 V DC |
| Nominal discharge current (In) | 15 kA (8/20 µs) |
| Maximum discharge current (Imax) | 40 kA (8/20 µs) |
| Voltage protection level (Up) | 0.4 kV |
| Voltage protection level at 5 kA | 0.3 kV |
| Response time | 25 ns |
| Operating temperature | −40 to +80 °C |
| Protection rating | IP20 |
| Compatible SPD | Finder 7P.21.8.075.1015 |
| Installation type | Plug-in connection to compatible SPD base |
| Mechanical coding | Coded replacement module |
| Module width | 17.4 mm |
| Module height | 48.3 mm |
| Module depth | 45 mm |
| Net weight | approx. 44.4 g |
| Maximum associated backup fuse | 160 A gL/gG |
| Associated short-circuit current rating | 50 kA rms |
| Applicable SPD standards | IEC/EN 61643-11 |
| Mounting arrangement | Replacement cartridge within an existing SPD assembly |
| EAN / GTIN | 8012823396309 |
| Country of origin | Czech Republic |
The Finder 7P.20.8.075.0015 is a plug-in varistor replacement module for compatible Finder Series 7P Type 2 surge protection devices. It helps maintain protection against transient overvoltages in low-voltage AC and DC electrical installations.
No. The 7P.20.8.075.0015 is a replacement varistor cartridge designed to plug into a compatible Finder SPD base. It must be used as part of the designated complete surge protection assembly.
The Finder 7P.20.8.075.0015 has a maximum continuous operating voltage (Uc) of 75 V AC or 100 V DC, making it suitable for compatible low-voltage surge protection installations.
The module has a 15 kA nominal discharge current (In), measured using an 8/20 µs surge waveform.
The Finder 7P.20.8.075.0015 has a 40 kA maximum discharge current (Imax), measured using an 8/20 µs surge waveform.
The module has a specified 0.4 kV voltage protection level (Up) at nominal discharge current and approximately 0.3 kV at 5 kA, indicating its surge voltage limitation performance under the applicable test conditions.
The Finder 7P.20.8.075.0015 uses metal oxide varistor (MOV) technology. The varistor becomes conductive during a transient overvoltage event, helping divert surge current through the protective circuit and limit the voltage reaching connected equipment.
The Finder 7P.20.8.075.0015 is the designated replacement varistor module for the Finder 7P.21.8.075.1015 Type 2 surge protection device. The installed SPD model should always be checked before replacement.
Yes. Its plug-in modular construction allows the compatible varistor cartridge to be replaced while retaining the existing SPD base, provided the base remains serviceable and the correct replacement module is used.
The Finder 7P.20.8.075.0015 is designed for operation in ambient temperatures from −40 to +80 °C, supporting use in demanding industrial and commercial electrical installations.
The replacement module measures approximately 48.3 mm high, 17.4 mm wide and 45 mm deep, with a net weight of approximately 44.4 g.
The module should be replaced when the compatible surge protection device indicates that its varistor element has reached the end of its service life, or when replacement is required following inspection or maintenance. Always follow the manufacturer's instructions and appropriate electrical safety procedures.
Finder Series 7P surge protection devices provide modular solutions for protecting low-voltage electrical installations against transient overvoltages. Combining established metal oxide varistor technology with practical plug-in cartridge construction and straightforward maintenance, the Finder 7P.20.8.075.0015 helps electrical contractors, panel builders and industrial maintenance engineers maintain dependable surge protection in compatible low-voltage AC and DC systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.