Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.20.1.000.0020 is a plug-in spark gap surge protection replacement module with 255 V AC maximum continuous operating voltage, 20 kA nominal discharge current, 40 kA maximum discharge current and 1.5 kV voltage protection level for compatible Finder Series 7P surge protection assemblies.
£49.37
The Finder 7P.20.1.000.0020 is a high-performance plug-in spark gap surge protection replacement module designed for compatible Finder Series 7P surge protection devices (SPDs). Developed for low-voltage electrical distribution systems, this replacement cartridge helps maintain protection against transient overvoltages caused by lightning-induced disturbances and electrical switching operations.
Featuring spark gap discharge technology, the Finder 7P.20.1.000.0020 provides a 20 kA nominal discharge current (In) and 40 kA maximum discharge current (Imax), both measured using an 8/20 µs surge waveform. Its 1.5 kV voltage protection level (Up) helps limit transient overvoltages when the module is installed in its designated surge protection assembly.
With a 255 V AC maximum continuous operating voltage, an IP20 protection rating and a wide −40 to +80 °C operating temperature range, this mechanically coded replacement module is suitable for demanding electrical distribution applications. Its convenient plug-in design allows the protective cartridge to be replaced without changing the complete SPD base, provided the existing assembly remains serviceable.
Electrical installations are exposed to transient overvoltages caused by lightning activity, power network disturbances and switching operations. These short-duration voltage surges can damage sensitive electronic components, interrupt industrial processes and reduce the reliability of connected electrical equipment. Properly selected surge protection devices (SPDs) help limit these transient overvoltages and reduce the risk of equipment damage.
The Finder 7P.20.1.000.0020 spark gap replacement module is designed to provide surge discharge protection within compatible Finder Series 7P assemblies. Its spark gap technology creates a conductive discharge path when the applied transient voltage exceeds the device's operating threshold, allowing surge current to be diverted through the intended protective circuit.
With a 20 kA nominal discharge current, 40 kA maximum discharge current and 1.5 kV voltage protection level, the module provides specified surge-handling characteristics for compatible low-voltage distribution applications. These values relate to the replacement module; the overall protection provided by an installation also depends on the complete SPD assembly, earthing arrangement and electrical connections.
The plug-in modular design supports straightforward maintenance of surge protection systems. When a compatible spark gap cartridge requires replacement, the 7P.20.1.000.0020 can be installed into its designated Finder SPD base without replacing the entire assembly, provided the base remains serviceable and the replacement code is correct.
For dependable operation, the module must be installed only in a compatible Finder Series 7P base. Electrical isolation, replacement procedures and verification of the complete surge protection system should be carried out by a qualified electrical professional in accordance with the manufacturer's instructions and applicable electrical installation regulations.
| Manufacturer | Finder |
|---|---|
| Series | 7P Surge Protection Devices |
| Model | 7P.20.1.000.0020 |
| Product type | Spark gap surge protection replacement module |
| Protection technology | Spark gap |
| Module configuration | Plug-in replacement cartridge |
| Nominal system voltage | 230 V AC |
| Maximum continuous operating voltage (Uc) | 255 V AC |
| Nominal discharge current (In) | 20 kA (8/20 µs) |
| Maximum discharge current (Imax) | 40 kA (8/20 µs) |
| Voltage protection level (Up) | 1.5 kV |
| Response time | 100 ns |
| Ambient operating temperature | −40 to +80 °C |
| Protection rating | IP20 |
| Mounting type | Plug-in connection to compatible SPD base |
| Mechanical coding | Coded replacement module |
| Compatible product range | Finder Series 7P |
| Application | Low-voltage electrical surge protection |
| Mounting arrangement | Replacement cartridge within an existing SPD assembly |
| Integrated remote signalling contact | No |
| Integrated visual status indicator | No |
| EAN / GTIN | 8012823334738 |
| Environmental compliance | RoHS |
The Finder 7P.20.1.000.0020 is a plug-in spark gap replacement module for compatible Finder Series 7P surge protection devices. It helps maintain protection against transient overvoltages in low-voltage electrical distribution installations.
No. The 7P.20.1.000.0020 is a replacement spark gap cartridge designed to plug into a compatible Finder SPD base. It is not intended for standalone installation.
The module has a 20 kA nominal discharge current (In), measured using an 8/20 µs surge current waveform.
The Finder 7P.20.1.000.0020 has a 40 kA maximum discharge current (Imax), measured using an 8/20 µs surge waveform.
The module has a 255 V AC maximum continuous operating voltage (Uc) and is associated with compatible 230 V AC electrical systems. Suitability must be confirmed against the complete SPD assembly and installation requirements.
The Finder 7P.20.1.000.0020 has a specified 1.5 kV voltage protection level (Up), indicating the surge voltage limitation performance under the applicable test conditions.
A spark gap surge protector uses an electrical discharge gap that becomes conductive when subjected to a sufficiently high transient voltage. This provides a path for surge current to flow through the protective circuit rather than through sensitive connected equipment.
Yes. Its plug-in modular construction allows a compatible spark gap cartridge to be replaced while retaining the existing SPD base, provided the base remains serviceable and the correct replacement module is used.
The module is designed for operation in ambient temperatures from −40 to +80 °C, supporting use in a wide range of industrial and commercial electrical installations.
The Finder 7P.20.1.000.0020 has an IP20 protection rating and is intended for installation within a compatible surge protection assembly housed in suitable electrical distribution equipment.
No. The 7P.20.1.000.0020 replacement cartridge does not incorporate a separate remote signalling contact. Any remote monitoring features depend on the configuration of the complete Finder SPD assembly.
The module is intended for designated Finder Series 7P surge protection assemblies requiring the 7P.20.1.000.0020 spark gap cartridge. The installed SPD model and manufacturer's compatibility information should always be checked before replacement.
Finder Series 7P surge protection devices provide modular solutions for protecting low-voltage electrical installations against transient overvoltages. Combining established spark gap protection technology with replaceable cartridge construction and practical maintenance features, the Finder 7P.20.1.000.0020 helps electrical contractors, panel builders and industrial maintenance engineers maintain reliable surge protection in compatible electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.