Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.04.8.275.1012 is a four-pole Type 1+2 surge protection device for compatible 230/400 V AC three-phase electrical installations, featuring a 275 V AC maximum continuous operating voltage for line protection and DIN rail mounting.
£441.82
The Finder 7P.04.8.275.1012 is a Type 1+2 surge protection device (SPD) designed to protect low-voltage electrical installations against transient overvoltages caused by lightning activity and electrical switching operations. Part of the Finder 7P Series, this four-pole surge arrester is intended for use in three-phase electrical distribution systems where coordinated protection against high-energy surges is required.
Featuring a 275 V AC maximum continuous operating voltage for its line protection elements, the Finder 7P.04.8.275.1012 is designed for 230/400 V AC three-phase installations. Its combined Type 1 and Type 2 protection capability makes it suitable for installation at electrical distribution board locations where lightning impulse currents and switching-induced transient overvoltages must be managed.
The device uses surge-limiting protection technology to divert transient currents away from connected electrical equipment. Its modular DIN rail construction supports integration into industrial switchboards, commercial distribution boards and building electrical infrastructure, helping reduce the risk of surge-related damage to sensitive electronic equipment.
The Finder 7P.04.8.275.1012 provides combined surge protection functionality for low-voltage electrical installations. Type 1 protection is intended to handle high-energy lightning impulse currents, while Type 2 protection limits transient overvoltages that may otherwise reach downstream equipment.
In a three-phase distribution system, electrical surges can arise from nearby lightning activity, disturbances on the incoming electrical supply and switching of inductive loads. A correctly selected surge protection device provides a low-impedance path for transient surge currents, helping limit the voltage appearing across protected equipment.
Effective protection depends on correct SPD selection and installation. Engineers should verify the earthing arrangement, lightning protection requirements, impulse current rating, nominal discharge current, voltage protection level, backup overcurrent protection and conductor lengths against the manufacturer's technical documentation.
Modern electrical installations frequently contain sensitive devices such as PLCs, electronic power supplies, variable frequency drives, communication equipment and building automation controllers. Transient overvoltages can damage these components or interrupt operation, leading to maintenance costs and unplanned downtime.
The Finder 7P.04.8.275.1012 is designed to form part of an electrical surge protection strategy for three-phase distribution systems. Its combined Type 1+2 classification makes it relevant to installations requiring protection at incoming distribution points or other locations identified through an appropriate surge risk assessment.
For effective protection, the SPD must be coordinated with the electrical installation's earthing system, upstream protective devices and any downstream surge arresters. Installation should be carried out by a competent electrician in accordance with applicable electrical standards and Finder's installation instructions.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Product family | 7P.04 |
| Model | 7P.04.8.275.1012 |
| Product type | Surge protection device / surge arrester |
| SPD classification | Type 1+2 |
| Number of poles | 4 |
| Electrical system | Three-phase AC |
| Nominal installation voltage | 230/400 V AC |
| Maximum continuous operating voltage (Uc) | 275 V AC for line protection elements |
| Protection function | Lightning impulse and transient overvoltage protection |
| Installation type | Low-voltage electrical distribution board |
| Mounting | 35 mm DIN rail |
| Relevant SPD standard | EN/IEC 61643-11 |
| Application | Electrical installation and equipment surge protection |
| Manufacturer part number | 7P.04.8.275.1012 |
The Finder 7P.04.8.275.1012 is a four-pole surge protection device designed to protect compatible three-phase electrical installations against transient overvoltages associated with lightning activity and electrical switching.
Type 1+2 indicates a combined surge protection device designed to handle high-energy lightning impulse currents while also providing Type 2 protection against transient overvoltages in low-voltage electrical installations.
The device is intended for compatible 230/400 V AC three-phase installations and has a 275 V AC maximum continuous operating voltage for its line protection elements.
The surge protection device is designed for installation on a 35 mm DIN rail inside a suitable electrical distribution board. The correct installation position depends on the electrical system, earthing arrangement and required surge protection coordination.
Confirm the installation's earthing arrangement, nominal voltage, required lightning impulse current capacity, discharge current rating, voltage protection level and backup protection requirements against the manufacturer's technical documentation before installation.
Finder 7P Series surge protection devices provide practical protection against transient overvoltages in industrial and commercial electrical installations. The 7P.04.8.275.1012 combines four-pole construction, Type 1+2 protection and a 275 V AC line protection rating to support coordinated surge protection for three-phase electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.