Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.04.8.255.S012 is a combined Type 1+2 three-phase surge protection device for TN-S and TT electrical systems, featuring 12.5 kA lightning impulse capability per protection path, 20 kA nominal discharge current, 255 V AC maximum continuous operating voltage and 40 mm busbar mounting.
£366.67
The Finder 7P.04.8.255.S012 is a combined Type 1+2 lightning and surge protection device (SPD) designed to protect three-phase electrical installations against lightning impulse currents and transient overvoltages. Part of the Finder 7P Series, this surge arrester provides coordinated lightning current discharge and overvoltage limitation in a single protective assembly.
Designed for three-phase TN-S and TT electrical networks, the Finder 7P.04.8.255.S012 features a five-conductor arrangement covering L1, L2, L3, neutral and protective earth. Its 12.5 kA lightning impulse current rating per protection path, measured using the 10/350 µs waveform, makes it suitable for installations requiring Type 1 lightning current protection. The device also provides a 20 kA nominal discharge current using the 8/20 µs waveform and a 1.5 kV voltage protection level.
Engineered for 40 mm busbar mounting, this combined surge arrester is particularly suited to compatible main electrical distribution assemblies and pre-metering installations where permitted. Its replaceable protection modules, optical fault indication and module retention system support straightforward maintenance and dependable protection in demanding electrical distribution applications.
Electrical installations can experience transient overvoltages caused by direct or indirect lightning activity, electrical switching operations and disturbances within the supply network. These events may damage sensitive electronic equipment, interrupt industrial processes and compromise electrical system reliability. The Finder 7P.04.8.255.S012 Type 1+2 surge protection device is designed to reduce these risks by discharging high-energy surge currents and limiting the voltage reaching downstream equipment.
With a 12.5 kA lightning impulse current rating per protection path, the device provides enhanced lightning current handling capability for suitable installations. Its combined Type 1+2 classification enables use at the transition between lightning protection zones, including LPZ 0 and LPZ 1, where both lightning current discharge and transient overvoltage protection are required.
The 40 mm busbar mounting arrangement supports integration into compatible electrical distribution assemblies, while the replaceable protective modules and optical status indication simplify inspection and maintenance. The device is intended for specified TN-S and TT earthing systems and should be selected in accordance with the installation's lightning protection requirements, prospective fault current, upstream protective devices and applicable electrical regulations.
For effective surge protection, installation should minimise the length of connecting conductors and ensure suitable coordination with any downstream SPDs. Any required external backup protection must be selected according to Finder's installation instructions. Installation and servicing must be carried out by a suitably qualified electrician.
Tick the specs you need, then view products that match.
| Impulse Current Iimp (kA) | 12.5 kA | |
|---|---|---|
| Manufacturer | Finder | |
| Series | 7P Series | |
| Model | 7P.04.8.255.S012 | |
| Manufacturer part number | 7P.04.8.255.S012 | |
| Product type | Combined lightning and surge arrester | |
| SPD classification | Type 1+2 | |
| Electrical system | Three-phase AC | |
| Compatible earthing systems | TN-S and TT | |
| System conductors | L1, L2, L3, N and PE | |
| Number of conductors excluding earth | 4 | |
| Nominal system voltage | 230 V AC | |
| Maximum continuous operating voltage (Uc) | 255 V AC | |
| Lightning impulse current (Iimp), 10/350 µs | 12.5 kA per protection path | |
| Nominal discharge current (In), 8/20 µs | 20 kA | |
| Voltage protection level (Up) | 1.5 kV | |
| Voltage protection level L-N | 1.5 kV | |
| Voltage protection level N-PE | 1.5 kV | |
| Mounting method | Busbar mounting | |
| Compatible busbar system | 40 mm | |
| Construction size | 3 modular units | |
| Protection modules | Replaceable | |
| Module retention system | Yes | |
| Status indication | Optical | |
| Remote signalling contact | No | |
| Integrated backup fuse | No | |
| Maximum rigid conductor cross-section | 35 mm² | |
| Maximum flexible conductor cross-section | 25 mm² | |
| Ingress protection | IP20 | |
| Unprotected outdoor installation | Not suitable | |
| Typical installation position | Main distribution or pre-metering area where permitted | |
| Lightning protection zone application | LPZ 0 to LPZ 1 transition | |
| Country of origin | Czech Republic | |
| EAN | 8012823429724 |
The Finder 7P.04.8.255.S012 is a combined Type 1+2 surge protection device designed to protect compatible three-phase TN-S and TT electrical installations against lightning impulse currents and transient overvoltages.
It is a combined Type 1+2 surge protection device, providing lightning impulse current discharge capability and transient overvoltage protection in one assembly.
The Finder 7P.04.8.255.S012 has a 12.5 kA lightning impulse current rating per protection path, measured using the 10/350 µs test waveform.
The device provides a 20 kA nominal discharge current, measured using the 8/20 µs surge waveform.
The Finder 7P.04.8.255.S012 is designed for three-phase TN-S and TT systems with L1, L2, L3, neutral and protective earth conductors.
The surge arrester has a 255 V AC maximum continuous operating voltage (Uc) and is designed for compatible 230 V AC electrical distribution systems.
The device has a specified 1.5 kV voltage protection level, including the L-N and N-PE protection paths.
The surge arrester is designed for 40 mm busbar mounting in compatible electrical distribution assemblies and has a three-module construction format.
Yes. The Finder 7P.04.8.255.S012 features replaceable protection modules and a module retention system, allowing convenient maintenance when replacement is required.
Yes. The device incorporates optical fault indication to provide a local visual indication of the condition of its protection modules.
No. The Finder 7P.04.8.255.S012 provides local optical indication but does not include a remote signalling contact.
No. The device does not include an integrated backup fuse. Any required external backup protection must be selected according to Finder's installation instructions and the electrical installation design.
The device has an IP20 ingress protection rating and is not suitable for unprotected outdoor mounting. It should be installed inside an appropriately rated electrical enclosure.
Both models are combined Type 1+2 surge protection devices designed for compatible three-phase TN-S and TT systems. The 7P.04.8.255.S012 provides a 12.5 kA lightning impulse current rating per protection path, compared with 7.5 kA for the 7P.04.8.255.S007 variant.
The surge arrester is intended for compatible main electrical distribution assemblies, including pre-metering installations where permitted, and for locations requiring combined Type 1+2 protection at a lightning protection zone transition.
Finder 7P Series surge protection devices are designed to support reliable electrical distribution system protection against lightning-induced surges and transient overvoltages. Combining Type 1+2 protection, 12.5 kA lightning impulse capability, 20 kA nominal discharge current, TN-S and TT compatibility, replaceable modules and 40 mm busbar mounting, the Finder 7P.04.8.255.S012 provides a practical surge protection solution for electrical contractors, industrial panel builders, consulting engineers and building infrastructure specialists.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.