Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.02.8.275.1012 is a Type 1+2 single-phase surge protection device with 1+NPE configuration, 230 V AC nominal voltage, 275 V AC maximum continuous operating voltage, 30 kA nominal discharge current, 60 kA maximum discharge current, replaceable modules and integrated SPDT remote signalling.
£189.56
The Finder 7P.02.8.275.1012 is a compact Type 1+2 surge protection device (SPD) from the Finder 7P Series, designed to protect single-phase electrical installations against transient overvoltages caused by lightning activity and electrical switching operations. Intended for 230 V AC systems, this DIN rail-mounted surge arrester provides coordinated protection between line and neutral (L-N) and neutral and protective earth (N-PE), helping safeguard electrical distribution equipment and sensitive electronic components.
Featuring a 1+NPE protection configuration, the Finder 7P.02.8.275.1012 combines high-energy varistor technology with an encapsulated gas discharge tube (GDT). Its 275 V AC maximum continuous operating voltage (Uc), 30 kA nominal discharge current (In) and 60 kA maximum discharge current (Imax) provide substantial surge handling capability for appropriately designed low-voltage installations.
The device incorporates replaceable protection modules, visual status indication and an integrated SPDT remote signalling contact for monitoring surge protection status. With a compact 36 mm width, IP20 protection and standard 35 mm DIN rail mounting, it is particularly suitable for electrical distribution boards, industrial automation panels, building services installations and single-phase electrical infrastructure.
Industrial and commercial electrical installations can experience transient overvoltages caused by lightning strikes, induced lightning currents and switching operations within the electrical supply network. These disturbances can damage sensitive components such as PLCs, variable speed drives, power supplies, communication interfaces and electronic control equipment.
The Finder 7P.02.8.275.1012 provides Type 1+2 surge protection for compatible single-phase electrical systems. Type 1 capability supports the handling of high-energy lightning impulses, while Type 2 functionality helps limit transient overvoltages associated with induced surges and electrical switching events.
Its 1+NPE configuration incorporates protection between line and neutral and between neutral and protective earth. This arrangement is particularly relevant to appropriately designed TT and TN-S single-phase systems, where the correct selection and placement of surge protection devices is essential for effective protection.
The combination of varistor technology and encapsulated gas discharge tubes provides effective surge limitation while supporting the electrical characteristics required for the intended protection arrangement. The specified 1.5 kV voltage protection level helps reduce transient overvoltage stress on connected equipment.
For installations requiring ongoing protection monitoring, the integrated SPDT auxiliary contact enables compatible monitoring equipment to detect changes in SPD status. This is useful in industrial automation cabinets, unmanned installations and electrical distribution systems where maintenance personnel may not be able to inspect the device frequently.
The replaceable protection modules simplify maintenance following end-of-life indication. Instead of replacing the complete SPD assembly, appropriately trained personnel can replace the relevant cartridge in accordance with Finder's instructions, after safely isolating the installation.
Correct surge protection performance depends on the complete electrical installation, including earthing, upstream protection, conductor length, protective device coordination and installation location. Engineers should follow the applicable electrical installation standards and Finder's technical documentation when specifying and installing the device.
| Manufacturer | Finder |
|---|---|
| Product series | 7P Series |
| Manufacturer part number | 7P.02.8.275.1012 |
| Product type | Surge protection device (SPD) |
| Surge protection classification | Type 1+2 |
| Protection configuration | 1+NPE |
| Electrical system | Single-phase AC with neutral |
| Compatible earthing arrangements | TT and TN-S, subject to installation requirements |
| Nominal voltage (Un) | 230 V AC |
| Maximum continuous operating voltage (Uc) | 275 V AC |
| Nominal discharge current (In), 8/20 µs | 30 kA |
| Maximum discharge current (Imax), 8/20 µs | 60 kA |
| Voltage protection level (Up) | 1.5 kV |
| Short-circuit current rating (Isccr) | 50 kA |
| Protection technology | Varistor and encapsulated gas discharge tube |
| L-N protection | Combined varistor and GDT |
| N-PE protection | Gas discharge tube |
| Remote signalling | Integrated SPDT auxiliary contact |
| Local status indication | Optical / visual indication |
| Protection modules | Replaceable |
| Maximum upstream fuse rating | 160 A |
| Mounting method | 35 mm DIN rail according to EN 60715 |
| Modular width | 36 mm |
| Number of modular spaces | 2 |
| Overall height | 87.6 mm |
| Overall depth | 76 mm |
| Maximum rigid conductor cross-section | 35 mm² |
| Maximum flexible conductor cross-section | 25 mm² |
| Ingress protection | IP20 |
| Operating temperature | −40 to +80 °C |
| EAN | 8012823437903 |
| Application | Single-phase electrical distribution surge protection |
The Finder 7P.02.8.275.1012 is a Type 1+2 surge protection device designed to protect compatible 230 V AC single-phase electrical installations against transient overvoltages caused by lightning activity and electrical switching events.
The device has a 30 kA nominal discharge current (8/20 µs), a 60 kA maximum discharge current (8/20 µs) and a 1.5 kV voltage protection level. It is classified as a combined Type 1+2 surge protection device.
Yes. The Finder 7P.02.8.275.1012 features a 1+NPE configuration designed for compatible single-phase TT and TN-S installations with neutral. Correct selection, wiring and earthing must follow the applicable installation requirements.
Yes. The device includes an integrated SPDT auxiliary contact for remote status signalling, together with local visual indication. This allows compatible monitoring equipment to detect changes in the surge protection device's condition.
Yes. The Finder 7P.02.8.275.1012 uses replaceable protection modules and mounts onto a standard 35 mm DIN rail. Its overall width is 36 mm, equivalent to two modular spaces. Replacement and installation should be carried out by qualified personnel following Finder's instructions.
The Finder 7P.02.8.275.1012 combines Type 1+2 surge protection, 230 V AC nominal operation, 30 kA nominal discharge current, 60 kA maximum discharge current, a 1.5 kV voltage protection level and integrated remote signalling in a compact 36 mm DIN rail-mounted assembly, providing dependable surge protection for compatible single-phase electrical distribution and industrial automation installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.