Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.25.8.275.0020 is a four-pole DIN rail-mounted Type 2 surge protection device for compatible 230/400 V AC three-phase TN-S electrical systems, featuring 275 V AC maximum continuous operating voltage, 20 kA nominal discharge current, 40 kA maximum discharge current, 1.2 kV voltage protection level, replaceable varistor cartridges and optical status indication without remote signalling.
£116.98
The Finder 7P.25.8.275.0020 is a professional four-pole Type 2 surge protection device (SPD) designed to protect three-phase electrical installations against transient overvoltages caused by induced lightning surges and electrical switching operations. Part of the trusted Finder Series 7P, this DIN rail-mounted surge arrester provides protection for three-phase TN-S electrical distribution systems with separate neutral and protective earth conductors.
Engineered for standard 230/400 V AC three-phase electrical systems, the Finder 7P.25.8.275.0020 features a 275 V AC maximum continuous operating voltage (Uc), a 20 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax), measured using an 8/20 µs surge waveform. Its 1.2 kV voltage protection level (Up) helps limit transient overvoltages reaching connected equipment when the SPD is correctly selected, installed and coordinated with the electrical system.
The device incorporates four replaceable metal oxide varistor protection modules and integrated visual status indicators to simplify inspection and maintenance. Its compact four-module DIN rail construction, IP20 protection rating and wide operating temperature range make it suitable for industrial distribution boards, commercial electrical installations and three-phase automation systems. The 7P.25.8.275.0020 is the version without a remote signalling contact, making it a practical choice where local visual inspection is sufficient.
Three-phase electrical installations can be exposed to transient overvoltages caused by lightning activity, switching operations, inductive loads and disturbances within the electrical supply network. Although these voltage spikes are often extremely short, they can damage electronic equipment, interrupt industrial processes and reduce the reliability of connected electrical systems.
The Finder 7P.25.8.275.0020 Type 2 surge arrester is designed to help protect compatible 230/400 V AC three-phase TN-S systems. Its four-pole configuration provides protection for the three phase conductors and neutral relative to protective earth, helping limit transient voltages across the electrical installation.
The device uses metal oxide varistor technology, which responds to transient overvoltages by becoming conductive and diverting surge current through the intended protective path. With a 20 kA nominal discharge current, 40 kA maximum discharge current and 1.2 kV voltage protection level, the SPD provides defined surge protection characteristics for properly designed electrical distribution systems.
The Finder 7P.25.8.275.0020 is particularly suitable for installation in three-phase distribution boards where Type 2 protection is required downstream of the main electrical supply or as part of a coordinated surge protection arrangement. It is typically installed at the boundary between lightning protection zones LPZ 1 and LPZ 2, or at a higher protection zone, depending on the overall electrical installation design.
Effective surge protection depends on more than the SPD rating alone. The installation must also account for the earthing arrangement, upstream protective devices, connection lengths and coordination with any other surge protection devices. Installation should be carried out by a qualified electrical professional in accordance with Finder's instructions and applicable electrical regulations.
Surge protection devices are exposed to repeated transient events throughout their operating life. Over time, these events can degrade the protective elements, eventually requiring replacement to maintain effective surge protection.
The Finder 7P.25.8.275.0020 incorporates four replaceable varistor cartridges, allowing maintenance personnel to replace individual protection elements without changing the complete SPD base, provided the base remains serviceable and the correct replacement modules are used.
Each protective element includes optical status indication. A red indication in the status window identifies a varistor cartridge requiring replacement, helping maintenance teams assess the condition of the installed SPD during routine inspections.
This model is supplied without a remote signalling contact. It is therefore well suited to installations where local inspection of surge protection status is sufficient and external monitoring through a building management system or PLC is not required.
| Manufacturer | Finder |
|---|---|
| Series | 7P Surge Protection Devices |
| Model | 7P.25.8.275.0020 |
| Product type | Three-phase Type 2 surge protection device |
| SPD classification | Type 2 |
| Number of poles | 4 (3P+N) |
| Electrical configuration | Three-phase plus neutral |
| Suitable earthing arrangement | TN-S |
| Protection arrangement | L1-PE, L2-PE, L3-PE and N-PE |
| Protection technology | Four metal oxide varistors (MOV) |
| Nominal system voltage (Un) | 230/400 V AC |
| Nominal phase-to-neutral voltage | 230 V AC |
| Maximum continuous operating voltage (Uc), AC | 275 V AC |
| Maximum continuous operating voltage, DC characteristic | 350 V DC |
| Nominal discharge current (In) | 20 kA (8/20 µs) |
| Maximum discharge current (Imax) | 40 kA (8/20 µs) |
| Voltage protection level (Up) | 1.2 kV |
| Neutral-to-earth voltage protection level | 1.2 kV |
| Short-circuit current rating (Isccr) | 50 kA, subject to specified installation conditions |
| Maximum associated backup fuse | 160 A, subject to manufacturer coordination requirements |
| Integrated short-circuit protection | No |
| Integrated backup fuse | No |
| Protection elements | Replaceable varistor cartridges |
| Local status indication | Optical varistor status indicators |
| Integrated remote signalling contact | No |
| Mounting method | DIN rail |
| DIN rail size | 35 mm |
| DIN rail standard | EN 60715 |
| Installation space | 4 modular spacing units |
| Overall width | Approximately 71.8 mm |
| Maximum rigid conductor cross-section | 35 mm² |
| Maximum flexible conductor cross-section | 25 mm² |
| Ingress protection | IP20 |
| Operating temperature | −40 to +80 °C |
| Applicable standard | IEC/EN 61643-11 |
| Typical installation location | LPZ 1 / LPZ 2 boundary or higher protection zone |
| EAN / GTIN | 8012823398150 |
The Finder 7P.25.8.275.0020 is a four-pole Type 2 surge protection device designed to protect compatible three-phase TN-S electrical installations against transient overvoltages caused by induced lightning surges and electrical switching operations.
Yes. The 7P.25.8.275.0020 is a complete DIN rail-mounted Type 2 surge protection assembly incorporating four replaceable varistor protection modules and optical protection status indication.
The Finder 7P.25.8.275.0020 is designed for compatible three-phase TN-S electrical systems with separate neutral and protective earth conductors. The installation earthing arrangement must be verified before selecting the SPD.
The Finder 7P.25.8.275.0020 has a maximum continuous operating voltage (Uc) of 275 V AC and is designed for compatible 230/400 V AC three-phase electrical systems.
The device has a 20 kA nominal discharge current (In), measured using the standard 8/20 µs surge current waveform.
The Finder 7P.25.8.275.0020 has a 40 kA maximum discharge current (Imax), measured using an 8/20 µs surge waveform.
The SPD has a specified 1.2 kV voltage protection level (Up), including a 1.2 kV neutral-to-earth protection level, indicating its surge voltage limitation performance under the applicable test conditions.
No. The Finder 7P.25.8.275.0020 does not include an integrated remote signalling contact. Protection status is monitored locally using the optical indicators on the varistor cartridges.
Yes. The Finder 7P.25.8.275.0020 incorporates optical varistor status indicators. A red indication in a status window identifies a protective cartridge that requires replacement.
Yes. The replaceable varistor modules allow individual protection cartridges to be changed while retaining the existing SPD base, provided the base remains serviceable and the correct Finder replacement modules are used.
The device mounts onto a standard 35 mm DIN rail in accordance with EN 60715. It occupies four modular spacing units, measures approximately 71.8 mm wide and should be installed inside a suitable electrical enclosure.
Yes. The Finder 7P.25.8.275.0020 is designed for compatible 230/400 V AC three-phase TN-S systems, with a maximum continuous operating voltage of 275 V AC. Correct selection and installation must be confirmed against the electrical system requirements.
The Finder 7P.25.8.275.0020 is designed for ambient operating temperatures from −40 to +80 °C, supporting use in a wide range of industrial and commercial electrical installations.
Both devices are Type 2 surge protection assemblies for compatible three-phase installations with a neutral conductor. The 7P.24.8.275.0020 uses varistor protection for the three phase conductors and a spark gap between neutral and protective earth, while the 7P.25.8.275.0020 uses four varistor protection elements and is intended for TN-S systems.
Finder Series 7P surge protection devices provide practical, modular solutions for protecting electrical installations against transient overvoltages. Combining four-pole metal oxide varistor technology, replaceable protection cartridges and clear visual status indication, the Finder 7P.25.8.275.0020 offers dependable Type 2 surge protection for compatible 230/400 V AC three-phase TN-S electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.