Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.22.8.275.0020 Type 2 surge protection device for single-phase TT and TN-S electrical systems, featuring 1+NPE protection, 275 V AC varistor rating, 20 kA nominal discharge current and replaceable varistor and spark gap modules.
£70.18
The Finder 7P.22.8.275.0020 is a Type 2 surge protection device (SPD) from the Finder 7P Series, designed to protect low-voltage electrical installations against transient overvoltages caused by induced lightning surges and electrical switching disturbances. Its two-pole configuration makes it suitable for compatible AC power distribution and electrical protection applications.
This surge protection device uses metal oxide varistor (MOV) technology to limit transient voltage spikes and divert surge currents away from connected electrical equipment. By reducing the effects of transient overvoltages, it helps protect sensitive control equipment, electrical components and distribution systems against surge-related damage.
With a 275 V AC maximum continuous operating voltage and a 20 kA nominal discharge current, the Finder 7P.22.8.275.0020 provides a practical solution for electrical installations requiring Type 2 surge protection. Its modular construction and 35 mm DIN rail mounting enable straightforward integration into electrical distribution boards, industrial control panels and suitable protection enclosures.
Transient overvoltages can enter electrical installations through incoming power supplies, distribution wiring and switching operations. Surge protection devices such as the Finder 7P.22.8.275.0020 help reduce the impact of these disturbances by limiting excessive voltages and diverting transient surge currents through a suitably designed protection arrangement.
The Finder 7P Series supports electrical engineers and installers in protecting sensitive equipment within residential, commercial and industrial installations. Correctly selected Type 2 surge protection can help reduce the risk of damage to control systems, power supplies and electrical components while supporting reliable operation. The SPD must be coordinated with the installation earthing arrangement, upstream protective devices and applicable electrical installation requirements.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series Surge Protection Devices |
| Model | 7P.22.8.275.0020 |
| Product type | AC surge protection device |
| SPD classification | Type 2 |
| Number of poles | 2 |
| Protection technology | Metal oxide varistor (MOV) |
| Maximum continuous operating voltage (Uc) | 275 V AC |
| Nominal discharge current (In, 8/20 µs) | 20 kA |
| Surge protection function | Transient overvoltage limitation |
| Electrical application | Low-voltage AC distribution systems |
| Mounting type | 35 mm DIN rail |
| Installation | Electrical distribution boards and suitable control enclosures |
| Product family | Finder 7P electrical surge protection |
The Finder 7P.22.8.275.0020 is a two-pole Type 2 surge protection device designed to protect compatible low-voltage AC electrical installations against transient overvoltages caused by induced lightning and switching disturbances.
The Finder 7P.22.8.275.0020 has a maximum continuous operating voltage of 275 V AC and should be selected according to the electrical system voltage and earthing arrangement.
The device has a 20 kA nominal discharge current, measured using an 8/20 µs surge waveform, for protection against transient overvoltages.
The Finder 7P.22.8.275.0020 is a Type 2 surge protection device intended for transient overvoltage protection in low-voltage AC installations. Where direct lightning current protection is required, an appropriately rated Type 1 or combined Type 1+2 SPD may also be necessary.
The device is designed for DIN rail mounting inside suitable electrical distribution boards, industrial control panels and protection enclosures, with installation carried out according to the electrical system design and applicable safety standards.
Finder 7P Series surge protection devices provide practical solutions for protecting low-voltage electrical installations against transient overvoltages, helping electrical contractors, panel builders and industrial engineers safeguard connected equipment and maintain reliable electrical system operation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.