Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 7P.21.8.275.0020 is a single-pole Type 2 metal oxide varistor surge protection device for low-voltage electrical distribution systems, featuring a 275 V AC maximum continuous operating voltage, 20 kA nominal discharge current, local status indication and DIN rail mounting.
£31.20
The Finder 7P.21.8.275.0020 is a compact single-pole Type 2 surge protection device (SPD) designed to help protect low-voltage electrical installations against transient overvoltages caused by switching operations and lightning-induced disturbances. Part of the Finder 7P Series, it provides surge protection for appropriately rated AC electrical distribution circuits.
With a maximum continuous operating voltage (Uc) of 275 V AC and a nominal discharge current (In) of 20 kA, this model is suited to applications requiring Type 2 surge protection on compatible 230 V AC circuits. Its metal oxide varistor protection technology provides a discharge path for transient surge currents, helping limit voltage stress on connected electrical and electronic equipment.
The 7P.21.8.275.0020 is designed for installation in electrical distribution boards and industrial control enclosures. Its modular DIN rail construction, local protection status indication and replaceable protective element support straightforward installation, inspection and maintenance. This variant is intended for applications where remote status signalling is not required.
Electrical distribution systems are regularly exposed to transient disturbances generated by switching operations, inductive loads and lightning activity. Although these overvoltage events are generally brief, their magnitude can be sufficient to damage electronic components, reduce insulation life or interrupt the operation of sensitive control equipment. The Finder 7P.21.8.275.0020 helps address these risks through its Type 2 metal oxide varistor protection element.
During normal operation, the surge protector presents a high-impedance path. When a sufficiently large transient overvoltage occurs, the varistor becomes conductive and diverts surge current through the designed protection path. This action helps limit the transient voltage experienced by connected equipment. The device's 275 V AC Uc rating must be matched to the electrical system, while its 20 kA nominal discharge current provides a defined measure of its ability to withstand repeated standardised surge impulses.
The compact construction allows installation in distribution boards, machine control panels and other electrical enclosures. A local status indicator helps maintenance personnel identify the condition of the protective element, while the replaceable cartridge design supports servicing when necessary. The absence of remote signalling makes this model particularly appropriate for installations where local inspection is sufficient.
Effective surge protection also depends on the complete electrical installation. Correct upstream protection, earthing arrangements, conductor routing and coordination with other SPDs are essential. The maximum discharge current, voltage protection level and short-circuit withstand characteristics should be checked against Finder's model-specific documentation before final equipment selection.
| Manufacturer | Finder |
|---|---|
| Series | 7P Series |
| Product family | 7P.21 |
| Model | 7P.21.8.275.0020 |
| Manufacturer part number | 7P.21.8.275.0020 |
| Product type | Surge protection device |
| SPD classification | Type 2 |
| Number of poles | 1 |
| Protection technology | Metal oxide varistor |
| Maximum continuous operating voltage (Uc) | 275 V AC |
| Nominal discharge current (In, 8/20 µs) | 20 kA |
| Remote signalling | No |
| Local status indication | Visual protective element status indicator |
| Protective element | Replaceable cartridge |
| Mounting | DIN rail |
| Application | Low-voltage AC electrical distribution surge protection |
| Relevant standard family | IEC/EN 61643-11 |
The Finder 7P.21.8.275.0020 is a single-pole Type 2 surge protection device designed to help protect low-voltage AC electrical installations against transient overvoltages caused by switching operations and lightning-induced disturbances.
The device has a maximum continuous operating voltage (Uc) of 275 V AC. This rating must be suitable for the electrical system and conductor arrangement being protected.
The Finder 7P.21.8.275.0020 has a nominal discharge current (In) of 20 kA, measured using the standard 8/20 µs surge waveform.
Its 275 V AC maximum continuous operating voltage makes it suitable for appropriately configured 230 V AC surge protection applications. The electrical network, earthing arrangement and required protection characteristics must be checked before installation.
No. The 7P.21.8.275.0020 is the version without an integrated remote signalling contact. It provides local visual indication of the protective element's condition.
Both models belong to the Finder 7P.21 Type 2 surge protection family. The 7P.21.8.275.0020 is the version without remote signalling, while the 7P.21.8.275.1020 is the corresponding remote-signalling variant. Exact electrical ratings should be checked against the manufacturer's specifications.
The Finder 7P.21 product family uses replaceable protective elements. Replacement should be carried out using the correct manufacturer-approved cartridge after the electrical installation has been safely isolated.
The local indicator provides information about the condition of the surge protection element. If the indicator shows that the protective element has reached its end-of-life condition, it should be inspected and replaced according to Finder's instructions.
Type 1 SPDs are designed to handle high-energy lightning impulse currents, while Type 2 SPDs are designed for transient surges such as induced lightning disturbances and electrical switching events. The Finder 7P.21.8.275.0020 is a Type 2 SPD.
No. A surge protection device limits transient overvoltages but does not replace conventional overcurrent or short-circuit protection. Suitable circuit breakers, fuses and any required SPD backup protection must be provided.
The device should be installed inside a suitably protected electrical enclosure. For outdoor applications, the enclosure must provide the environmental protection required for the installation.
Check the system operating voltage, earthing arrangement, maximum continuous operating voltage, discharge current ratings, voltage protection level, upstream protection requirements, prospective fault current and installation conductor lengths.
Finder 7P Series surge protection devices provide a practical approach to reducing the effects of transient overvoltages in industrial and commercial electrical systems. With Type 2 metal oxide varistor technology, compact DIN rail construction and local protection status indication, the Finder 7P.21.8.275.0020 supports dependable protection and straightforward maintenance of appropriately rated AC electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.