Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CTH080004R0000 ABB ESEAT Pole Test Kit
ABB ESEAT Pole Test Kit 2CTH080004R0000 is a 2.75 m non-deployed testing pole designed to establish the contacts required for functional testing of compatible ABB OPR and Pulsar Early Streamer Emission lightning air terminals.
£1,223.29
Why Choose the ABB ESEAT Pole Test Kit?
The ABB ESEAT Pole Test Kit is a dedicated testing pole for ABB Early Streamer Emission Air Terminals (ESEAT), designed to support functional testing of compatible OPR and Pulsar lightning air terminals. It allows maintenance personnel to reach an installed air terminal and establish the contacts required for testing without removing the lightning air terminal from its installation.
During testing, the pole establishes contact with the tip of the ESE air terminal, while the test arrangement also requires contact with the bottom of the pole or the lightning down conductor. Used with the appropriate test equipment, this enables the electronics inside the compatible OPR or Pulsar air terminal to be checked by activating its internal high-voltage circuit.
Identified by ABB type B752471, the ESEAT Pole Test Kit has a length of 2.75 m when not deployed, a unit weight of 3.39 kg and is supplied individually. The product is supplied under ABB order code 2CTH080004R0000 for professional inspection and maintenance of compatible ABB external lightning protection systems.
Key Advantages
- Dedicated testing pole for compatible ABB ESE lightning air terminals.
- Supports functional testing of ABB OPR and Pulsar air terminals.
- Allows contact to be established with an installed ESE air-terminal tip.
- Supports testing without requiring removal of the compatible air terminal from its installed position.
- Used to help verify the electronics of the air terminal through activation of its internal high-voltage circuit.
- 2.75 m length when not deployed.
- Designed specifically for professional external lightning protection inspection and maintenance.
- Manufacturer-specific ABB accessory for compatible ESE air-terminal testing systems.
Key Features
- ABB external lightning protection testing accessory.
- ESEAT Pole Test Kit configuration.
- B752471 type designation.
- Designed for compatible Early Streamer Emission Air Terminals.
- Suitable for ABB OPR and Pulsar lightning air-terminal testing applications.
- Provides contact with the ESE air-terminal tip during testing.
- Used as part of a test arrangement contacting the air-terminal tip and the bottom of the pole or down conductor.
- 2.75 m length when not deployed.
- 3.39 kg unit weight.
- Supplied individually.
Functional Testing of ABB ESE Lightning Air Terminals
ABB OPR and Pulsar Early Streamer Emission air terminals incorporate internal electronics that can be functionally checked as part of lightning protection system inspection and maintenance. ABB specifies a testing arrangement requiring contact with the air-terminal tip at one end and the bottom of the pole or down conductor at the other. The test equipment then activates the high-voltage internal circuit of the ESE air terminal to check its electronics.
The ESEAT Pole Test Kit provides the physical reach required to make contact with the installed air-terminal tip. It is therefore a specialist maintenance accessory rather than an electrical surge protective device or a complete standalone electronic tester. Inspection and testing should be performed by appropriately trained personnel following ABB's instructions and the maintenance requirements applicable to the complete lightning protection system.
Typical Applications
- Functional testing of compatible ABB OPR lightning air terminals.
- Functional testing of compatible ABB Pulsar lightning air terminals.
- Early Streamer Emission air-terminal inspection programmes.
- Preventive maintenance of external lightning protection systems.
- Commercial building lightning protection inspections.
- Industrial facility lightning protection maintenance.
- Infrastructure and utility lightning protection inspections.
- Periodic verification of compatible installed ABB ESE air terminals.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Product designation | ESEAT Pole Test | |
| Description | ESEAT Pole Test Kit | |
| ABB type | B752471 | |
| ABB order code | 2CTH080004R0000 | |
| EAN | 3660308524713 | |
| Product group | Surge Protection Devices | |
| Product category | External lightning protection testing accessory | |
| Application | Testing compatible ABB Early Streamer Emission lightning air terminals | |
| Compatible ranges | ABB OPR and Pulsar ESE air terminals | |
| Testing function | Provides contact for activation and testing of the air terminal's internal high-voltage electronic circuit | |
| Length when not deployed | 2.75 m | |
| Packaging quantity | 1 piece | |
| Weight | 3.39 kg |
Frequently Asked Questions
What is the ABB ESEAT Pole Test Kit used for?
The ABB ESEAT Pole Test Kit is used to establish contact with compatible ABB Early Streamer Emission air terminals during functional testing, allowing the air terminal's internal electronics to be checked using the appropriate test arrangement.
How does the ABB ESEAT Pole Test Kit test an air terminal?
ABB specifies that the testing arrangement requires contact with the ESE air-terminal tip and with the bottom of the pole or the down conductor. The associated test equipment activates the high-voltage internal circuit of the air terminal so its electronics can be checked.
Which ABB lightning air terminals can the pole test kit be used with?
ABB identifies this pole test kit for testing its OPR and Pulsar Early Streamer Emission lightning air terminals as part of the respective external lightning protection test arrangements.
How long is the ABB ESEAT Pole Test Kit?
ABB specifies the ESEAT Pole Test Kit as 2.75 m when not deployed. The kit has a unit weight of 3.39 kg.
What is the ABB order code for the ESEAT Pole Test Kit?
The ABB order code is 2CTH080004R0000. The ABB type designation is B752471 and the EAN is 3660308524713.
Trusted ABB Lightning Protection Testing Accessories
ABB external lightning protection testing accessories provide dedicated solutions for inspection and maintenance of compatible Early Streamer Emission air terminals, with the B752471 ESEAT Pole Test Kit providing the physical test contact required to support functional verification of ABB OPR and Pulsar air-terminal electronics.
