Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OPR 30 is an Early Streamer Emission Air Terminal for external lightning protection systems with a 30 µs time gain, designed for installation in accordance with NF C 17-102 and supplied without a mounting mast.
£844.94
The ABB OPR 30 is an Early Streamer Emission Air Terminal (ESEAT) designed for external lightning protection systems. Rather than being an electrical surge protective device installed inside a distribution board, the OPR 30 is installed at the highest appropriate point of a structure and forms part of the external system used to intercept lightning strikes and conduct lightning current safely towards the earth termination network.
The OPR range uses ABB's Optimised Pulse Rod technology to generate an upward leader earlier than a conventional reference air terminal under the conditions defined by the applicable ESE standard. The OPR 30 provides a 30 µs time gain (ΔT), with the resulting radius of protection determined by the installation height and the required lightning protection level.
Manufactured as a robust air terminal for exposed installation, the OPR 30 is supplied without a mast, allowing the appropriate ABB mast and installation accessories to be selected separately for the application. The unit has a nominal length of approximately 0.215 m and is supplied under ABB order code 2CTB899800R7000, with ABB reference 7TCA083010R0392.
An Early Streamer Emission air terminal is positioned above the structure or area requiring protection and is intended to initiate an upward leader in advance of a conventional reference air terminal under the prescribed test conditions. For the ABB OPR 30, the specified time gain is 30 µs. The achievable radius of protection is not a single fixed value: it depends on the height of the OPR tip above the surface being protected and the lightning protection level selected following the required risk assessment.
The OPR 30 forms only one part of the complete external lightning protection system. Correct protection also requires appropriate positioning, mounting, down conductors, bonding and an effective earth termination system. Installation and verification of systems incorporating ABB OPR air terminals should therefore be carried out in accordance with ABB's installation recommendations and the applicable NF C 17-102 requirements.
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Product range | OPR | |
| Product type | Early Streamer Emission Air Terminal (ESEAT) | |
| ABB order code | 2CTB899800R7000 | |
| ABB reference | 7TCA083010R0392 | |
| EAN | 3660308513496 | |
| Product group | Surge Protection Devices | |
| Application | External lightning protection | |
| Time gain (ΔT) | 30 µs | |
| Air-terminal length | approx. 0.215 m | |
| Maximum operating temperature | 120 °C | |
| Installation standard | NF C 17-102 | |
| Mast | Ordered separately |
The ABB OPR 30 is an Early Streamer Emission Air Terminal used as part of an external lightning protection system to intercept lightning strikes and provide a defined protection zone around a structure when correctly designed and installed.
The OPR 30 has a specified 30 µs time gain (ΔT). This characteristic is used together with the installation height and required lightning protection level when determining the protection radius in accordance with the applicable ESE lightning protection methodology.
No. The OPR 30 air terminal is supplied without a mast. A suitable mounting mast and associated installation accessories must be selected separately for the lightning protection system.
ABB specifies that installation and verification of lightning protection systems incorporating OPR air terminals should be performed in accordance with the manufacturer's recommendations and NF C 17-102.
The ABB order code for the OPR 30 is 2CTB899800R7000, and the associated ABB reference is 7TCA083010R0392.
ABB OPR Early Streamer Emission air terminals provide a dedicated external lightning interception solution for buildings and infrastructure, with the OPR 30 offering a 30 µs time gain for use in professionally designed lightning protection systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.