Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OVR T2 1N 80-275s P QS two-pole Type 2 pluggable surge protective device for 230 V AC TT and TN-S systems, with 20 kA nominal discharge current, 80 kA maximum discharge current and Safety Reserve functionality.
£198.72
The ABB OVR T2 1N 80-275s P QS is a two-pole Type 2 surge protective device (SPD) designed to protect single-phase plus neutral low-voltage electrical installations against transient overvoltages caused by indirect lightning effects and switching events. Identified by ABB order code 2CTB815708R1400, it is intended for 230 V AC TT and TN-S systems and provides L-N, L-PE and N-PE protection.
Designed for installations requiring high surge-current capability, the OVR T2 1N 80-275s P QS provides a 20 kA nominal discharge current (In) and an 80 kA maximum discharge current (Imax) using an 8/20 µs waveform. It also has a 6.25 kA impulse-current capability (Iimp) using a 10/350 µs waveform and a 1.4 kV voltage protection level (Up).
The device combines ABB's patented QuickSafe technology with its Safety Reserve system. Integrated thermal disconnection and end-of-life indication support safe maintenance, while the pluggable design allows protection cartridges to be replaced without changing the complete DIN rail base. This P QS version provides local status indication without a remote auxiliary signalling contact.
Type 2 SPDs are designed to discharge currents generated by indirect lightning strikes and switching transients before damaging overvoltages propagate through the electrical installation. The ABB OVR T2 1N 80-275s P QS combines a 20 kA nominal discharge current with an 80 kA maximum discharge-current capability and 1.4 kV protection level, providing high-capacity transient protection for compatible single-phase plus neutral distribution systems.
ABB's patented Safety Reserve system adds a secondary protection stage so that the SPD does not become completely disconnected when its primary protection element reaches the end of its service life. Combined with QuickSafe technology, integrated thermal disconnection, local end-of-life indication and replaceable cartridges, this allows maintenance to be planned while maintaining a basic level of surge protection.
Tick the specs you need, then view products that match.
| Remote Signal | No | |
|---|---|---|
| Device Type | Surge protection device | |
| SPD Type | Type 2 | |
| Poles | 1-pole + N | |
| Earthing System | TN-S, TT | |
| Impulse Current Iimp (kA) | 6.25 kA | |
| Series | OVR T2 | |
| ABB order code | 2CTB815708R1400 | |
| Product group | Surge Protection Devices | |
| Product type | Surge protective device | |
| SPD classification | Type 2 / Class II | |
| Configuration | 1N / 1+N | |
| Number of protected lines | 2 | |
| Number of poles | 2 | |
| Protection modes | L-N / L-PE / N-PE | |
| Low-voltage distribution systems | TT / TN-S | |
| Nominal voltage | 230 V AC | |
| Maximum continuous operating voltage (Uc) | 275 V AC | |
| Nominal discharge current (In, 8/20 µs) | 20 kA | |
| Maximum discharge current (Imax, 8/20 µs) | 80 kA | |
| Impulse current (Iimp, 10/350 µs) | 6.25 kA | |
| Voltage protection level (Up) | 1.4 kV | |
| Short-circuit current rating (Isccr) | 100 kA | |
| Integrated thermal disconnector | Yes | |
| End-of-life indicator | Yes | |
| Safety Reserve | Yes | |
| QuickSafe technology | Yes | |
| Remote auxiliary contact | No | |
| Maximum backup fuse | 160 A | |
| Maximum backup MCB | 125 A | |
| Protection rating | IP20 | |
| Operating temperature | -40 to +80 °C | |
| Mounting | 35 mm DIN rail | |
| Construction | Pluggable | |
| Width | 2 modular spaces | |
| Dimensions (H × W × D) | 88 × 35.6 × 76.7 mm | |
| Net weight | 0.30 kg | |
| Standards | IEC 61643-11 / EN 61643-11 | |
| Compatible phase cartridge | OVR T2 80-275s C QS | |
| Phase cartridge order code | 2CTB815708R2600 | |
| Compatible neutral cartridge | OVR T2 N 80-275s C QS | |
| Neutral cartridge order code | 2CTB815708R2800 | |
| EAN | 3660308525482 |
It is a Type 2 surge protective device designed to protect 230 V AC single-phase plus neutral TT and TN-S electrical installations against transient overvoltages caused by indirect lightning effects and switching events.
The device has a nominal discharge current (In) of 20 kA and a maximum discharge current (Imax) of 80 kA using an 8/20 µs waveform. Its impulse-current capability (Iimp) is 6.25 kA using a 10/350 µs waveform.
The “s” denotes ABB's Safety Reserve functionality. The Safety Reserve system provides a secondary level of protection after the primary protection stage reaches its end-of-life condition, allowing replacement maintenance to be planned.
No. This P QS version does not include an auxiliary remote signalling contact. It provides local end-of-life status indication for inspection at the distribution board.
Yes. The device has a pluggable construction. Compatible replacement modules include the ABB OVR T2 80-275s C QS phase cartridge, order code 2CTB815708R2600, and OVR T2 N 80-275s C QS neutral cartridge, order code 2CTB815708R2800.
ABB OVR Type 2 surge protective devices combine high surge-current capability with QuickSafe technology, Safety Reserve functionality, pluggable protection modules and clear condition indication to support effective transient overvoltage protection and planned maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.