Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OVR T2 3L 80-275s P TS QS is a three-pole pluggable Type 2 surge protective device for 230/400 V AC TN-C systems, with Safety Reserve technology, 20 kA nominal discharge current, 80 kA maximum discharge current, 275 V AC maximum continuous operating voltage and remote status signalling.
£388.79
The ABB OVR T2 3L 80-275s P TS QS, order code 2CTB815708R0600, is a high-capacity Type 2 surge protective device (SPD) designed for three-phase 230/400 V AC TN-C electrical systems. Installed in main distribution boards or sub-distribution boards, it protects electrical installations and connected equipment against transient overvoltages caused by indirect lightning effects and switching events.
The OVR T2 3L 80-275s P TS QS provides three protected L-PEN paths with a maximum continuous operating voltage of 275 V AC. It has a nominal discharge current In of 20 kA and a high maximum discharge current Imax of 80 kA using the 8/20 µs waveform, together with an impulse-current capability Iimp of 6.25 kA using the 10/350 µs waveform.
ABB's patented Safety Reserve system provides a preventive-maintenance function that helps extend protection availability, while QuickSafe technology supports dependable end-of-life disconnection. Pluggable construction, visual status indication and TS remote signalling with one normally open and one normally closed auxiliary contact make this SPD particularly suitable for demanding commercial and industrial installations where local and remote condition monitoring are required.
Type 2 SPDs are designed to discharge surge currents associated with indirect lightning effects and switching operations before damaging transient voltages reach connected equipment. With an 80 kA maximum 8/20 µs discharge-current rating, the ABB OVR T2 3L 80-275s P TS QS provides particularly high surge-current capability while maintaining a low 1.4 kV protection level for downstream equipment.
ABB's patented Safety Reserve system is designed to extend protection availability and support planned preventive maintenance, helping reduce the risk of downtime. The pluggable architecture simplifies replacement, while local status indication and TS auxiliary contacts allow maintenance personnel to monitor the SPD both at the switchboard and through suitable remote monitoring or alarm equipment.
Tick the specs you need, then view products that match.
| Remote Signal | Yes | |
|---|---|---|
| Device Type | Surge protection device | |
| SPD Type | Type 2 | |
| Poles | 3-pole | |
| Earthing System | TN-C | |
| Impulse Current Iimp (kA) | 6.25 kA | |
| Series | OVR T2 QuickSafe | |
| ABB order code | 2CTB815708R0600 | |
| EAN / GTIN | 3660308525437 | |
| Product group | Surge Protection Devices | |
| Product type | Type 2 surge protective device | |
| SPD classification | Type 2 / Class II | |
| Standards | IEC 61643-11 / EN 61643-11 | |
| Low-voltage distribution system | TN-C | |
| Protection mode | L-PEN | |
| Number of poles | 3 | |
| Number of protected lines | 3 | |
| Rated voltage | 230 V AC | |
| Nominal system voltage | 230 / 400 V AC | |
| Frequency | 45–65 Hz | |
| Maximum continuous operating voltage Uc | 275 V AC | |
| Impulse current Iimp (10/350 µs) | 6.25 kA | |
| Nominal discharge current In (8/20 µs) | 20 kA | |
| Maximum discharge current Imax (8/20 µs) | 80 kA | |
| Voltage protection level Up | 1.4 kV | |
| Short-circuit withstand capability | 100 kA | |
| Rated service short-circuit breaking capacity Ics | 100 kA | |
| Maximum backup fuse | 160 A | |
| Maximum backup circuit breaker | 125 A | |
| Preventive maintenance function | Yes | |
| Safety Reserve | Yes | |
| QuickSafe technology | Yes | |
| Status indicator | Yes | |
| Remote signalling | Yes | |
| Normally open auxiliary contacts | 1 | |
| Normally closed auxiliary contacts | 1 | |
| Construction | Pluggable | |
| Replacement cartridge | OVR T2 80-275s C QS | |
| Replacement cartridge order code | 2CTB815708R2600 | |
| Degree of protection | IP20 | |
| Operating temperature | -40 to +80 °C | |
| Maximum operating altitude | 5000 m | |
| Power loss | 49 mW | |
| Mounting type | DIN rail | |
| Width | 53.4 mm | |
| Height | 95.8 mm | |
| Depth | 76.7 mm | |
| Weight | 0.45 kg |
It is a Type 2 surge protective device designed for three-phase 230/400 V AC TN-C systems, protecting electrical installations and connected equipment against transient overvoltages caused by indirect lightning effects and electrical switching events.
The device has a nominal discharge current In of 20 kA and a maximum discharge current Imax of 80 kA using the 8/20 µs waveform, together with a 6.25 kA impulse-current capability using the 10/350 µs waveform.
The “s” identifies the Safety Reserve version. ABB's patented Safety Reserve system provides a preventive-maintenance function designed to extend protection availability and help maintenance personnel plan cartridge replacement.
The TS version includes remote signalling through one normally open and one normally closed auxiliary contact, allowing SPD condition information to be integrated with suitable monitoring or alarm systems.
Yes. The OVR T2 3L 80-275s P TS QS has a pluggable construction and uses the ABB OVR T2 80-275s C QS replacement cartridge, order code 2CTB815708R2600.
ABB OVR Type 2 surge protective devices combine high surge-current capability, patented QuickSafe technology and pluggable construction, with the OVR T2 3L 80-275s P TS QS delivering 80 kA maximum discharge capability, Safety Reserve preventive maintenance and remote status signalling for demanding three-phase TN-C electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.