Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OVR T2 40-440s P QS is a pluggable single-pole Type 2 surge protection device with 40 kA maximum discharge current, 20 kA nominal discharge current, 440 V AC maximum continuous operating voltage and Safety Reserve technology for compatible TT, TN-C, TN-S and IT low-voltage electrical systems.
£96.00
The ABB OVR T2 40-440s P QS, order code 2CTB815704R4100, is a pluggable Type 2 surge protection device (SPD) designed to protect low-voltage electrical installations against transient overvoltages caused by indirect lightning and switching events. Part of the ABB OVR QuickSafe range, this single-pole SPD uses varistor technology and ABB's Safety Reserve concept for dependable protection and straightforward maintenance.
The OVR T2 40-440s P QS provides a 20 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax) with an 8/20 µs waveform. ABB specifies a 400 V AC nominal voltage, 440 V AC maximum continuous operating voltage (Uc) and a 2 kV voltage protection level (Up), making the device suitable for compatible TT, TN-C, TN-S and IT low-voltage networks.
The “s” Safety Reserve design incorporates an additional varistor stage so that basic surge protection can remain available after the primary protection stage reaches the end of its service life. QuickSafe technology, visual status indication and pluggable construction support safe, efficient servicing, while the replaceable cartridge design avoids the need to replace the complete SPD assembly during routine maintenance.
Type 2 surge protection devices are designed to discharge transient currents associated with indirect lightning strikes and electrical switching events that produce induced or conducted overvoltages on low-voltage distribution networks. They are commonly installed in main distribution switchboards and subdistribution boards, with additional coordinated surge protection potentially required where sensitive equipment is remote from the primary SPD.
The ABB OVR T2 40-440s P QS combines a 40 kA maximum 8/20 µs discharge current with ABB's Safety Reserve technology. Instead of completely disconnecting surge protection when the primary varistor reaches the end of its service life, the reserve-varistor design maintains a basic level of protection until replacement can be carried out, while the pluggable OVR T2 40-440s C QS cartridge enables efficient servicing of the installed SPD.
Tick the specs you need, then view products that match.
| Remote Signal | No | |
|---|---|---|
| Device Type | Surge protection device | |
| SPD Type | Type 2 | |
| Poles | 1-pole | |
| Impulse Current Iimp (kA) | 2 kA | |
| Series | OVR T2 QuickSafe | |
| Order code / MPN | 2CTB815704R4100 | |
| EAN | 3660308525383 | |
| Product group | Surge Protection Devices | |
| Product type | Type 2 surge protection device | |
| SPD classification | Type 2 / Class II | |
| Number of poles | 1 | |
| Number of protected lines | 1 | |
| Compatible network types | TT (L-N), TN-C, TN-S, IT | |
| Nominal voltage | 400 V AC | |
| Maximum continuous operating voltage (Uc) | 440 V AC | |
| Nominal discharge current (In, 8/20 µs) | 20 kA | |
| Maximum discharge current (Imax, 8/20 µs) | 40 kA | |
| Impulse current (Iimp, 10/350 µs) | 2 kA | |
| Total discharge current | 40 kA | |
| Voltage protection level (Up) | 2 kV | |
| Rated service short-circuit breaking capacity (Ics) | 100 kA | |
| Safety Reserve | Yes | |
| Technology | Varistor | |
| Status indicator | Yes | |
| Pluggable cartridge | Yes | |
| Remote signalling | No; available on the corresponding TS variant | |
| Maximum backup MCB | 125 A | |
| Mounting type | 35 mm DIN rail | |
| Standards | IEC 61643-11 / EN 61643-11 | |
| Dimensions (H × W × D) | 85 × 35.6 × 69.4 mm | |
| Replacement cartridge | OVR T2 40-440s C QS | |
| Replacement cartridge order code | 2CTB815704R5500 | |
| Construction | Pluggable |
The ABB OVR T2 40-440s P QS is a single-pole Type 2 surge protection device designed to protect compatible low-voltage TT, TN-C, TN-S and IT electrical systems against transient overvoltages caused by indirect lightning and switching events.
The device has a 20 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax), measured using an 8/20 µs waveform. ABB also specifies a 2 kA impulse current (Iimp) with a 10/350 µs waveform.
ABB's Safety Reserve technology incorporates an additional smaller varistor so that basic surge protection can remain available when the primary protection stage reaches the end of its service life, providing time for planned replacement.
The SPD has a 400 V AC nominal voltage, a 440 V AC maximum continuous operating voltage (Uc) and a 2 kV voltage protection level (Up).
Yes. The OVR T2 40-440s P QS has a pluggable construction. The corresponding replacement protection cartridge is the ABB OVR T2 40-440s C QS, order code 2CTB815704R5500.
ABB OVR Type 2 surge protection devices are designed to help protect low-voltage electrical installations against transient overvoltages, with QuickSafe, Safety Reserve and pluggable technologies supporting effective surge protection and planned maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.