Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OVR T2 3L 40-350 P TS QS is a three-pole Type 2 surge protective device with 40 kA maximum discharge current, 20 kA nominal discharge current, 350 V AC maximum continuous operating voltage and remote signalling contacts for TN-C electrical installations.
£266.11
The ABB OVR T2 3L 40-350 P TS QS is a high-performance Type 2 surge protective device (SPD) designed to protect three-phase low-voltage electrical installations against transient overvoltages caused by indirect lightning effects and electrical switching events. As part of the ABB OVR QuickSafe surge protection range, it combines dependable surge protection with pluggable cartridges, visual status indication and remote signalling contacts for integration into monitored electrical systems.
Designed for TN-C 230/400 V AC networks, the OVR T2 3L 40-350 P TS QS protects three lines and provides a nominal discharge current of 20 kA and a maximum discharge current of 40 kA per pole using the standard 8/20 µs surge waveform. Its QuickSafe design incorporates thermal disconnection to provide reliable end-of-life isolation of the surge protection elements.
With a maximum continuous operating voltage of 350 V AC, a voltage protection level of 1.5 kV and a short-circuit withstand rating of 100 kA, this three-pole SPD is suitable for distribution boards, intermediate panels and installations close to sensitive equipment. The TS auxiliary signalling contacts enable remote monitoring of SPD status, making this version particularly useful in industrial and commercial installations where maintenance visibility is important.
Type 2 surge protective devices are installed in low-voltage distribution systems to limit transient overvoltages before they can damage connected electrical and electronic equipment. The ABB OVR T2 range diverts surge currents safely away from protected circuits, helping safeguard automation equipment, control systems, drives, communications hardware and other sensitive loads.
The OVR T2 3L 40-350 P TS QS adds remote status signalling to the benefits of ABB's pluggable QuickSafe platform. Its auxiliary NO and NC contacts can be incorporated into monitoring or alarm circuits, allowing maintenance teams to identify a change in SPD condition without relying solely on local visual inspection.
Tick the specs you need, then view products that match.
| Remote Signal | Yes | |
|---|---|---|
| Device Type | Surge protection device | |
| SPD Type | Type 2 | |
| Poles | 3-pole | |
| Earthing System | TN-C | |
| Series | OVR T2 QuickSafe | |
| ABB order code | 2CTB803883R2500 | |
| Product group | Surge Protection Devices | |
| Product type | Type 2 surge protective device | |
| SPD classification | Type 2 / Class II | |
| Standards | IEC 61643-11 / EN 61643-11 | |
| Protected lines | 3 | |
| Number of poles | 3 | |
| System network | TN-C | |
| Nominal system voltage | 230/400 V AC | |
| Rated voltage | 230 V AC | |
| Maximum continuous operating voltage Uc | 350 V AC | |
| Frequency | 45–65 Hz | |
| Maximum discharge current Imax (8/20 µs) | 40 kA | |
| Nominal discharge current In (8/20 µs) | 20 kA | |
| Voltage protection level Up | 1.5 kV | |
| Total discharge current | 120 kA | |
| Short-circuit withstand Isccr | 100 kA | |
| Maximum backup circuit breaker | 125 A, curve B or C | |
| Maximum backup fuse | 125 A gG/gL | |
| Response time | <25 ns | |
| Auxiliary contacts | 1 NO + 1 NC | |
| Status indicator | Yes | |
| Cartridge type | Pluggable | |
| Replacement phase cartridge | OVR T2 40-350 C QS, 2CTB803886R1000 | |
| Technology | QuickSafe | |
| Protection rating | IP20 | |
| Mounting type | DIN rail | |
| Width | 53.4 mm | |
| Modular width | 3 modules | |
| Dimensions (H × W × D) | 95 × 53.4 × 58 mm | |
| Solid conductor range | 2.5–25 mm² | |
| Stranded conductor range | 2.5–16 mm² | |
| Stripping length | 12.5 mm | |
| Weight | approx. 0.36 kg |
It is a Type 2 surge protective device designed to protect three-phase TN-C low-voltage installations and connected equipment against transient overvoltages caused by indirect lightning and switching events.
The OVR T2 3L 40-350 P TS QS has a maximum discharge current Imax of 40 kA per pole using an 8/20 µs waveform.
The TS version provides auxiliary signalling contacts for remote monitoring of the surge protective device's operating status, with one normally open and one normally closed contact.
It is designed for 230/400 V AC TN-C systems and has a maximum continuous operating voltage Uc of 350 V AC.
Yes. The OVR T2 3L 40-350 P TS QS uses pluggable phase cartridges, allowing the protection cartridges to be replaced while retaining the DIN-rail base assembly.
ABB OVR surge protective devices combine high surge discharge capability, pluggable QuickSafe construction and practical status monitoring to provide dependable protection for commercial and industrial low-voltage electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.