Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OVR T2-T3 20-275 P TS QS single-pole pluggable QuickSafe Type 2 and Type 3 surge protective device with 20 kA maximum discharge current, 5 kA nominal discharge current, 275 V AC maximum continuous operating voltage and remote signalling.
£58.86
The ABB OVR T2-T3 20-275 P TS QS is a compact combined Type 2 and Type 3 surge protective device (SPD) designed to protect low-voltage electrical installations and sensitive electronic equipment against transient overvoltages. Part of the ABB OVR QuickSafe surge protection range, it combines effective surge-current discharge capability with a low residual voltage level for protection close to sensitive equipment.
The OVR T2-T3 20-275 P TS QS provides a maximum discharge current (Imax) of 20 kA and a nominal discharge current (In) of 5 kA using an 8/20 µs waveform. It is designed for 230 V AC systems, has a 275 V AC maximum continuous operating voltage (Uc) and provides a low 0.9 kV voltage protection level (Up), helping protect sensitive downstream electrical and electronic equipment.
Its pluggable QuickSafe construction simplifies maintenance by allowing the protection cartridge to be replaced independently of the base. The TS remote signalling function provides auxiliary changeover contacts for external status monitoring, while the integrated end-of-life indicator allows straightforward local inspection. Its compact single-pole DIN-rail design makes it well suited to sub-distribution boards and installations close to sensitive terminal equipment.
Combined Type 2 and Type 3 surge protective devices are designed for installation in sub-distribution boards or close to sensitive terminal equipment. Their Type 2 characteristics allow them to safely discharge currents generated by indirect lightning effects using the 8/20 µs waveform, while their Type 3 characteristics provide a low residual voltage suitable for protecting sensitive electronic equipment.
The ABB OVR T2-T3 20-275 P TS QS combines a 20 kA maximum discharge capability with a low 0.9 kV protection level, QuickSafe technology and a replaceable cartridge. Remote signalling contacts further allow SPD status to be incorporated into building, industrial or maintenance monitoring systems.
Tick the specs you need, then view products that match.
| Remote Signal | Yes | |
|---|---|---|
| Device Type | Surge protection device | |
| SPD Type | Type 2+3 | |
| Impulse Current Iimp (kA) | 2 kA | |
| Series | OVR T2-T3 QuickSafe | |
| ABB order code | 2CTB803871R2500 | |
| Product group | Surge Protection Devices | |
| Product type | Combined Type 2 and Type 3 surge protective device | |
| Test class | Class II + III | |
| Number of poles | 1 | |
| Number of protected lines | 1 | |
| System application | 230 V AC | |
| Maximum continuous operating voltage (Uc) | 275 V AC | |
| Maximum discharge current (Imax, 8/20 µs) | 20 kA | |
| Nominal discharge current (In, 8/20 µs) | 5 kA | |
| Impulse current (Iimp, 10/350 µs) | 2 kA | |
| Voltage protection level (Up) | 0.9 kV | |
| Short-circuit withstand | 100 kA | |
| Network types | TT / TN-C / TN-S | |
| Technology | QuickSafe | |
| Construction | Pluggable | |
| Integrated thermal disconnector | Yes | |
| End-of-life indicator | Yes | |
| Remote signalling | Yes | |
| Auxiliary contacts | 1 NO + 1 NC | |
| Maximum backup protection | 125 A fuse or MCB | |
| Protection rating | IP20 | |
| Mounting type | DIN rail | |
| Dimensions (H × W × D) | 95 × 17.8 × 58 mm | |
| Maximum operating altitude | 5000 m | |
| Weight | approx. 0.12 kg | |
| Standards | IEC 61643-11 / EN 61643-11 |
It is a combined Type 2 and Type 3 surge protective device designed to protect low-voltage electrical installations and sensitive equipment against transient overvoltages, particularly in sub-distribution boards or close to terminal equipment.
The device has a maximum discharge current (Imax) of 20 kA using an 8/20 µs surge-current waveform.
The ABB OVR T2-T3 20-275 P TS QS has a voltage protection level (Up) of 0.9 kV, providing a low residual voltage suitable for protecting sensitive downstream equipment.
Yes. The TS version provides remote status signalling with 1 NO and 1 NC auxiliary contact, allowing SPD condition to be monitored externally.
Yes. It uses a pluggable protection cartridge, allowing the cartridge to be replaced during maintenance without replacing the complete SPD base.
ABB OVR QuickSafe surge protective devices provide dependable transient overvoltage protection for low-voltage electrical systems, combining coordinated Type 2 and Type 3 protection with compact DIN-rail installation, pluggable construction and practical remote status monitoring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.