Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OVR T2-T3 20-275 P QS single-pole pluggable QuickSafe Type 2 and Type 3 surge protective device for 230 V AC networks, with 20 kA maximum discharge current, 5 kA nominal discharge current and 0.9 kV voltage protection level.
£74.11
The ABB OVR T2-T3 20-275 P QS is a compact combined Type 2 and Type 3 surge protective device (SPD) designed to protect low-voltage electrical installations and sensitive electronic equipment against transient overvoltages. Part of the ABB OVR QuickSafe surge protection range, it combines effective surge-current discharge capability with a low residual voltage level for protection close to sensitive equipment.
The OVR T2-T3 20-275 P QS provides a maximum discharge current (Imax) of 20 kA and a nominal discharge current (In) of 5 kA using an 8/20 µs waveform. It has a 230 V AC nominal voltage, a 275 V AC maximum continuous operating voltage (Uc) and a low 0.9 kV voltage protection level (Up), helping protect sensitive downstream electrical and electronic equipment.
Its pluggable QuickSafe construction simplifies maintenance by allowing the protection cartridge to be replaced independently of the base. The single-pole device is suitable for TT, TN-C and TN-S systems and occupies only 17.8 mm of DIN-rail width, making it particularly useful in sub-distribution boards and installations close to sensitive terminal equipment.
Combined Type 2 and Type 3 surge protective devices are designed for installation in sub-distribution boards or close to sensitive terminal equipment. The Type 2 capability allows the SPD to safely discharge surge currents characterised by an 8/20 µs waveform, while its Type 3 characteristics provide a low residual voltage level suited to protecting sensitive electronic equipment.
The ABB OVR T2-T3 20-275 P QS combines a 20 kA maximum discharge capability with a low 0.9 kV protection level, QuickSafe technology and replaceable cartridge construction. This combination makes it a practical solution for coordinated surge protection in residential, commercial and industrial low-voltage electrical systems.
Tick the specs you need, then view products that match.
| Remote Signal | No | |
|---|---|---|
| SPD Type | Type 2+3 | |
| Device Type | Surge protection device | |
| Series | OVR T2-T3 QuickSafe | |
| ABB order code | 2CTB803871R2400 | |
| Product group | Surge Protection Devices | |
| Product type | Combined Type 2 and Type 3 surge protective device | |
| Number of poles | 1 | |
| Protected lines | 1L | |
| Nominal voltage (Un) | 230 V AC | |
| Maximum continuous operating voltage (Uc) | 275 V AC | |
| Maximum discharge current (Imax, 8/20 µs) | 20 kA | |
| Nominal discharge current (In, 8/20 µs) | 5 kA | |
| Voltage protection level (Up) | 0.9 kV | |
| Short-circuit current rating (Isccr) | 100 kA | |
| Maximum backup fuse | 125 A | |
| Maximum backup circuit breaker | 125 A | |
| Network types | TT / TN-C / TN-S | |
| Technology | QuickSafe | |
| Construction | Pluggable | |
| Replacement phase cartridge | OVR T2-T3 20-275 C QS | |
| Remote signalling | No | |
| Mounting type | DIN rail | |
| Dimensions (H × W × D) | 88 × 17.8 × 65.3 mm | |
| Weight | approx. 0.12 kg | |
| Standards | IEC 61643-11 / EN 61643-11 |
It is a combined Type 2 and Type 3 surge protective device designed to protect 230 V AC low-voltage electrical installations and sensitive equipment against transient overvoltages.
The device has a maximum discharge current (Imax) of 20 kA using an 8/20 µs surge-current waveform.
The ABB OVR T2-T3 20-275 P QS has a voltage protection level (Up) of 0.9 kV, providing a low residual voltage suitable for protecting sensitive downstream equipment.
The device is suitable for TT, TN-C and TN-S low-voltage electrical networks.
Yes. It uses a pluggable protection cartridge, allowing the cartridge to be replaced during maintenance without replacing the complete SPD base.
ABB OVR QuickSafe surge protective devices provide dependable transient overvoltage protection for low-voltage electrical systems, combining coordinated Type 2 and Type 3 protection with compact DIN-rail installation and practical pluggable construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.