Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
OXES800G1S/3 ABB TruONE 315-800A 3-Pole Short Terminal Shrouds IP20
ABB OXES800G1S/3 is a three-piece short terminal shroud kit with snap-on mounting and IP20 protection for compatible 3-pole TruONE 315–800 A IEC automatic transfer switches.
£46.75
Why Choose the ABB OXES800G1S/3 Short Terminal Shrouds?
The ABB OXES800G1S/3 is a genuine short terminal shroud kit designed for ABB TruONE automatic transfer switches rated 315–800 A IEC. Identified by ABB order code 1SCA150197R1001, the kit is configured for a 3-pole switch and contains 3 terminal shrouds.
Providing IP20 protection, the OXES800G1S/3 shrouds help guard the terminal area against accidental finger contact while supporting a neat and professional switchboard installation. The shrouds use convenient snap-on mounting and can be fitted to either the top or bottom terminals of the compatible TruONE switch.
The OXES800G1S/3 is specifically designed for TruONE 315–800 A IEC applications and has a unit weight of approximately 0.3 kg. One kit contains three short shrouds for one terminal side; two kits are required to cover both the top and bottom terminals of the switch.
Key Advantages
- Genuine ABB TruONE terminal shroud kit.
- Designed for 315–800 A IEC TruONE automatic transfer switches.
- Configured specifically for 3-pole switching equipment.
- Provides IP20 protection at the covered terminal area.
- Supplied as a complete set of 3 short shrouds.
- Convenient snap-on mounting simplifies installation.
- Can be installed on either the top or bottom terminals of the compatible switch.
Key Features
- ABB OXES800G1S/3 terminal shrouds.
- ABB order code 1SCA150197R1001.
- Part of the 311020-OT/OETL Accessories product group.
- Designed for TruONE 315–800 A IEC switches.
- 3-pole configuration.
- Short-type terminal shrouds.
- 3 pieces supplied per kit.
- IP20 protection.
- Snap-on mounting.
- Approximate unit weight of 0.3 kg.
IP20 Terminal Protection for ABB TruONE ATS
Terminal shrouds provide a physical protective barrier around exposed terminal connections. The ABB OXES800G1S/3 uses a short snap-on design to provide IP20 protection for the terminal area of compatible 3-pole TruONE automatic transfer switches, helping reduce the risk of accidental contact during normal operation.
Each kit contains three shrouds and can be used on either the top or bottom terminals. Where protection is required on both sides of the switch, two OXES800G1S/3 kits should be ordered. ABB specifies that these terminal shrouds are not used together with UL mechanical lugs.
Typical Applications
- ABB TruONE 315–800 A IEC automatic transfer switches.
- 3-pole TruONE ATS installations.
- Industrial electrical switchboards.
- Automatic mains and generator transfer systems.
- Low-voltage power distribution equipment.
- Commercial and industrial electrical panels.
- OEM switchgear and power distribution assemblies.
Technical Specifications
| Product group | 311020-OT/OETL Accessories |
|---|---|
| Order code | 1SCA150197R1001 |
| Product type | Terminal shroud kit |
| Series | TruONE |
| IEC current range | 315–800 A |
| UL current range | 260–600 A |
| Number of poles | 3 |
| Shroud type | Short |
| Quantity | 3 pieces |
| Degree of protection | IP20 |
| Mounting | Snap-on |
| Installation position | Top or bottom terminals |
| Sets required for top and bottom terminals | 2 |
| Weight | approx. 0.3 kg |
| EAN / GTIN | 6417019801568 |
Frequently Asked Questions
What is the ABB OXES800G1S/3 used for?
The OXES800G1S/3 is a short terminal shroud kit providing IP20 protection for the terminals of compatible 3-pole ABB TruONE 315–800 A IEC automatic transfer switches.
How many shrouds are supplied in the ABB OXES800G1S/3 kit?
Each OXES800G1S/3 kit contains 3 short terminal shrouds for a 3-pole switch.
What protection rating does the ABB OXES800G1S/3 provide?
The OXES800G1S/3 terminal shrouds provide an IP20 protection rating when correctly installed on compatible equipment.
Do I need two OXES800G1S/3 kits to cover both sides of the switch?
Yes. One kit can cover either the top or bottom terminals, so two kits are required to cover both the top and bottom terminals.
How are ABB OXES800G1S/3 terminal shrouds installed?
The OXES800G1S/3 shrouds use snap-on mounting for straightforward installation on the compatible TruONE switch terminals.
Designed for ABB TruONE Automatic Transfer Switches
ABB TruONE accessories provide purpose-designed protection and installation solutions for compatible automatic transfer switches, supporting safer terminal arrangements and professional industrial and commercial power distribution installations.
