Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OT40FPC-B is a 40 A 4-pole I-O-II open-transition manual changeover switch supplied in a wall-mountable IP65 steel enclosure for dependable manual transfer and isolation between alternative electrical supplies.
£354.12
The ABB OT40FPC-B is a 40 A, 4-pole manual changeover switch supplied in a robust steel enclosure with IP65 ingress protection. Designed for manual transfer between two electrical supplies, it provides a practical solution for industrial, commercial and critical-power applications requiring dependable source selection and isolation.
The OT40FPC-B uses an I-O-II open-transition switching arrangement, providing stable Supply I, OFF and Supply II positions. This enables an operator to manually disconnect one source before connecting the alternative source, helping provide controlled transfer between mains, generator, UPS or other suitable power supplies.
With its 40 A rating, 4-pole switching arrangement and wall-mountable steel enclosure, the OT40FPC-B is supplied as a complete enclosed manual transfer switch. Its IP65 enclosure provides protection against dust and water ingress when correctly installed, while the enclosure measures 400 × 300 × 150 mm.
The ABB OT40FPC-B is designed to provide manual transfer between two alternative electrical supplies and a common load. Its I-O-II open-transition operation provides a defined OFF position between Supply I and Supply II, allowing the connected load to be isolated during the changeover process.
The combination of 40 A capacity, four-pole switching and an IP65 steel enclosure makes the OT40FPC-B suitable for enclosed power-transfer applications where durability and straightforward manual operation are required. The four-pole arrangement also supports installations where four conductors need to be switched as part of the transfer scheme.
Tick the specs you need, then view products that match.
| Material | Steel | |
|---|---|---|
| Device Type | Enclosed changeover switch | |
| Series | OT Switches / Enclosed Manual Transfer Switches | |
| ABB order code | OT40FPC-B | |
| ABB product group | 311027-OT Switches | |
| Product type | Enclosed manual changeover / transfer switch | |
| Rated current | 40 A | |
| Number of poles | 4 | |
| Operation | Manual | |
| Switching positions | I-O-II | |
| Transfer type | Open transition | |
| Enclosure material | Steel | |
| Ingress protection | IP65 | |
| Mounting | Wall mountable | |
| Door arrangement | Blank door | |
| Enclosure height | 400 mm | |
| Enclosure width | 300 mm | |
| Enclosure depth | 150 mm | |
| Enclosure dimensions (H × W × D) | 400 × 300 × 150 mm |
The ABB OT40FPC-B is a 40 A, 4-pole enclosed manual changeover switch used to manually transfer a load between two alternative electrical supplies, such as mains and generator supplies.
I-O-II provides three operating positions: Supply I, OFF and Supply II. The OFF position provides isolation between the two supply-selection positions.
Yes. The OT40FPC-B uses open-transition manual transfer, meaning the connected source is disconnected before the alternative source is connected.
The OT40FPC-B is supplied in a steel, wall-mountable enclosure measuring 400 × 300 × 150 mm and providing IP65 ingress protection when correctly installed.
The ABB OT40FPC-B has a 4-pole configuration, allowing four conductors to be switched as part of the manual changeover operation.
ABB enclosed manual transfer switches provide dependable source selection and isolation, with the OT40FPC-B combining a 40 A rating, four-pole I-O-II open-transition operation and an IP65 steel enclosure for industrial and commercial power-transfer applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.