1TVS151800S3617 ABB EPX-8004-E2-MCCB 800A 4-Pole Electronic LSI MCCB Tmax XT6 Protecta Power

1TVS151800S3617 ABB EPX-8004-E2-MCCB 800A 4-Pole Electronic LSI MCCB Tmax XT6 Protecta Power

ABB EPX-8004-E2-MCCB is an 800 A four-pole Tmax XT6 electronic moulded case circuit breaker with configurable LSI overload and short-circuit protection for compatible Protecta Power low-voltage distribution assemblies.

SKU: 1TVS151800S3617Alt SKU: EPX-8004-E2-MCCBMPN: 1TVS151800S3617
Price
List Price £3,391.74 ex VAT
Your Price (ex VAT)
£3,391.74
Manufacturer Lead Time Estimated Delivery 3 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £3,391.74
Trade pricing is personalised to your account

Manufacturer Lead Time

£3,391.74

Why Choose the ABB EPX-8004-E2-MCCB 800A 4-Pole Electronic LSI MCCB?

The ABB EPX-8004-E2-MCCB is an 800 A, four-pole electronic moulded case circuit breaker (MCCB) from the ABB Tmax XT6 family, specified for use within compatible ABB Protecta Power low-voltage distribution assemblies. Featuring LSI electronic protection, this circuit breaker provides long-time overload, short-time short-circuit and instantaneous short-circuit protection for demanding commercial and industrial electrical installations.

Designed for high-capacity three-phase distribution systems, the EPX-8004-E2-MCCB combines the established ABB Tmax XT6 circuit breaker platform with configurable electronic protection characteristics. Its 800 A rated current and four-pole construction make it suitable for appropriately designed three-phase, four-wire systems where coordinated switching and circuit protection are required.

The LSI electronic trip arrangement provides separate long-time, short-time and instantaneous protection functions. These characteristics allow electrical engineers to coordinate the incoming protective device with cable capacities, prospective fault currents and downstream circuit breakers, supporting effective protection of the complete electrical distribution system.

Identified by ABB order code 1TVS151800S3617, the EPX-8004-E2-MCCB forms part of the Protecta Power Enclosures product range. It offers electrical contractors, consultants and panel builders a manufacturer-specified electronic MCCB solution for compatible 800 A distribution panelboards and associated low-voltage switchgear assemblies.

Key Advantages

  • 800 A rated current: Designed for high-capacity low-voltage electrical distribution circuits.
  • Four-pole construction: Supports coordinated switching in suitable three-phase, four-wire electrical systems.
  • ABB Tmax XT6 platform: Incorporates established ABB moulded case circuit breaker technology.
  • LSI electronic protection: Provides long-time, short-time and instantaneous overcurrent protection functions.
  • Adjustable protection characteristics: Enables configuration of electronic trip settings according to the electrical installation design.
  • Improved protection coordination: Supports discrimination studies and coordination with compatible downstream protective devices.
  • Protecta Power integration: Suitable for designated ABB Protecta Power incoming circuit breaker arrangements.
  • High-current switching capability: Provides a protective switching device for substantial commercial and industrial electrical loads.
  • Coordinated installation accessories: Supports integration using the appropriate ABB XT6 four-pole incoming connection arrangement.
  • Professional electrical distribution: Provides a manufacturer-matched circuit protection solution for panel builders and electrical contractors.

Key Features

  • ABB EPX-8004-E2-MCCB electronic moulded case circuit breaker.
  • 800 A rated current.
  • Four-pole (4P) configuration.
  • ABB Tmax XT6 circuit breaker platform.
  • Electronic LSI protection configuration.
  • L function: Long-time overload protection.
  • S function: Short-time short-circuit protection.
  • I function: Instantaneous short-circuit protection.
  • Configurable electronic protection settings.
  • Manual circuit breaker operating mechanism.
  • Designed for compatible high-current Protecta Power distribution assemblies.
  • Suitable for incoming circuit protection applications.
  • Supports coordination with downstream distribution circuit breakers.
  • Four-pole switching arrangement for appropriate three-phase installations.
  • Compatible with separately specified ABB Protecta Power connection accessories.
  • Part of the ABB Protecta Power Enclosures product range.

Advanced 800A Circuit Protection with Electronic LSI Technology

High-capacity electrical distribution systems require protective devices capable of managing sustained overload conditions and responding appropriately to short-circuit faults. The ABB EPX-8004-E2-MCCB provides electronic protection through the Tmax XT6 circuit breaker platform, supporting reliable circuit interruption and adjustable protection characteristics.

The long-time (L) protection function responds to sustained overload conditions that could otherwise cause excessive heating of electrical conductors and connected equipment. Its settings must be coordinated with the current-carrying capacity of the circuit and the intended operating load.

The short-time (S) protection function provides short-circuit protection with a configurable time delay. Where suitable for the installation, this allows downstream protective devices an opportunity to clear faults before the upstream circuit breaker operates. Such coordination can help limit unnecessary interruption to unaffected circuits.

The instantaneous (I) protection function provides rapid operation when the measured fault current reaches the configured instantaneous threshold. This function supports protection against high-magnitude short-circuit conditions where prompt interruption is required.

Unlike an LS/I electronic configuration, which provides a selection between short-time and instantaneous protection characteristics, an LSI configuration supports long-time, short-time and instantaneous functions as part of the same protection arrangement. This provides additional flexibility when coordinating high-current incoming and downstream protective devices.

The four-pole configuration allows the circuit breaker to be incorporated into suitable three-phase, four-wire distribution systems. The neutral pole arrangement and any associated neutral protection requirements must be confirmed against the selected ABB breaker configuration and the installation's earthing and distribution design.

For Protecta Power applications, the circuit breaker must be installed using the appropriate manufacturer-specified incoming connection arrangement. The ABB EPX-8004CK is identified as an 800 A four-pole XT6 connection kit; its suitability for the completed assembly should be confirmed before installation.

Final selection and commissioning must consider the prospective short-circuit current, system voltage, breaking capacity, cable sizing, thermal performance and protection coordination. The exact trip settings and electrical ratings must be verified using the applicable ABB documentation for the supplied breaker configuration.

Typical Applications

  • ABB Protecta Power 800 A incoming circuit protection.
  • High-capacity commercial electrical distribution boards.
  • Industrial low-voltage switchgear assemblies.
  • Three-phase, four-wire electrical distribution systems.
  • Manufacturing plants and production facilities.
  • Large commercial buildings and office developments.
  • Warehouses, logistics centres and distribution facilities.
  • Mechanical and electrical building services installations.
  • Main and sub-distribution board protection.
  • Electrical installations requiring configurable LSI protection.
  • Distribution systems requiring coordinated short-circuit protection.
  • Professional electrical panel building projects.
  • Refurbishment and upgrades of compatible ABB Protecta Power installations.

Technical Specifications

Product range Protecta Power Enclosures
Circuit breaker family ABB Tmax XT
Frame designation XT6
ABB order code 1TVS151800S3617
Product type Electronic moulded case circuit breaker (MCCB)
Rated current 800 A
Number of poles 4
Pole configuration Four-pole (4P)
Trip unit technology Electronic
Protection configuration LSI
Long-time protection L – overload protection
Short-time protection S – short-circuit protection with configurable delay
Instantaneous protection I – short-circuit protection without intentional delay
Protection adjustment Configurable electronic trip characteristics
Operating mechanism Manual circuit breaker operation
Application Low-voltage incoming circuit protection
Compatible distribution system ABB Protecta Power
Associated incoming connection kit EPX-8004CK, subject to assembly compatibility
Related electronic MCCB EPX-8004-E1-MCCB
Related thermal-magnetic MCCB EPX-8004MCCB
Related switch disconnector EPX-8004SD
Typical installation Commercial and industrial low-voltage distribution panelboards

Frequently Asked Questions

What is the ABB EPX-8004-E2-MCCB used for?

The ABB EPX-8004-E2-MCCB is an 800 A four-pole electronic Tmax XT6 moulded case circuit breaker designed for low-voltage circuit protection in compatible ABB Protecta Power distribution assemblies.

What is the rated current of the EPX-8004-E2-MCCB?

The EPX-8004-E2-MCCB has a rated current of 800 A. Its electronic protection settings must be coordinated with the connected conductors, operating load and electrical system design.

How many poles does the EPX-8004-E2-MCCB have?

The EPX-8004-E2-MCCB is a four-pole (4P) moulded case circuit breaker, suitable for appropriately designed three-phase distribution systems requiring four-pole switching.

What does LSI protection mean on this ABB MCCB?

LSI identifies three electronic protection functions: L for long-time overload protection, S for short-time short-circuit protection and I for instantaneous short-circuit protection.

What is the difference between the EPX-8004-E2-MCCB and EPX-8004-E1-MCCB?

The EPX-8004-E2-MCCB is specified with LSI electronic protection, providing long-time, short-time and instantaneous protection functions. The EPX-8004-E1-MCCB is the corresponding electronic XT6 version with LS/I protection, offering a selectable short-circuit protection characteristic.

Which ABB circuit breaker family does the EPX-8004-E2-MCCB use?

The EPX-8004-E2-MCCB uses the ABB Tmax XT6 moulded case circuit breaker platform, which is designed for high-current low-voltage electrical distribution applications.

Can the EPX-8004-E2-MCCB be installed in an ABB Protecta Power panelboard?

Yes. The EPX-8004-E2-MCCB belongs to the ABB Protecta Power Enclosures range and is intended for compatible distribution assemblies. The correct panelboard, incoming connection kit and installation arrangement must be confirmed before fitting.

Does the EPX-8004-E2-MCCB require a separate connection kit?

A suitable incoming connection arrangement is required for installation in a compatible Protecta Power panelboard. ABB identifies the EPX-8004CK as an 800 A four-pole XT6 connection kit. Compatibility and supply requirements should be checked against the complete assembly specification.

Is the EPX-8004-E2-MCCB suitable for industrial installations?

Yes. The 800 A electronic XT6 MCCB is suitable for appropriately designed commercial and industrial low-voltage distribution systems. Its breaking capacity, system voltage, protection settings and installation compatibility must be verified before commissioning.

Trusted by Electrical Contractors and Panel Builders

ABB Protecta Power electronic circuit breakers provide a coordinated approach to high-capacity electrical distribution. The EPX-8004-E2-MCCB combines an 800 A rating, four-pole Tmax XT6 construction and configurable LSI protection, supporting professional panel builders and electrical contractors in delivering reliable low-voltage distribution assemblies.