Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-8003MCCB (1TVS151800S3378) 800 A three-pole Tmax XT6 thermal-magnetic incoming MCCB providing overload and short-circuit protection for compatible ABB Protecta Power low-voltage electrical distribution panelboards.
£2,337.11
The ABB EPX-8003MCCB is a high-capacity 800 A three-pole moulded case circuit breaker (MCCB) designed for compatible ABB Protecta Power low-voltage electrical distribution panelboards. Based on the ABB SACE Tmax XT6 circuit breaker platform, this incoming protective device provides overload and short-circuit protection for appropriately designed three-phase power distribution systems.
Part of the ABB Protecta Power Enclosures range, the EPX-8003MCCB incorporates a thermal-magnetic (TMA) trip unit, combining thermal overload protection with magnetic short-circuit protection. Its three-pole (3P) configuration is intended for three-phase electrical distribution arrangements where a fourth switching pole is not required, providing a coordinated incoming protection solution for compatible 800 A Protecta Power assemblies.
Designed for electrical contractors, switchgear manufacturers and panel builders, the EPX-8003MCCB supports the construction of professional high-current distribution systems. With an 800 A rated current, ABB Tmax XT6 construction and manufacturer order code 1TVS151800S3378, this genuine ABB circuit breaker is suitable for commercial, industrial and infrastructure installations requiring reliable incoming circuit protection.
Incoming circuit protection is a critical element of a high-capacity low-voltage electrical distribution system. The incoming MCCB provides a protective switching point between the electrical supply and the distribution assembly, helping protect connected equipment and distribution circuits against overload and short-circuit conditions when correctly selected, installed and coordinated with the wider electrical network.
The ABB EPX-8003MCCB uses the ABB SACE Tmax XT6 platform with a thermal-magnetic TMA trip unit. The thermal element responds to sustained overcurrent conditions, while the magnetic element provides rapid tripping when sufficiently high short-circuit currents occur. This combination delivers conventional thermal-magnetic protection for applications where the device's operating characteristics meet the installation requirements.
The three-pole configuration makes the EPX-8003MCCB suitable for appropriately designed three-phase distribution systems that do not require a fourth switching pole. For applications requiring a four-pole arrangement, ABB offers the corresponding EPX-8004MCCB. Selecting the correct number of poles is essential for compatibility with the electrical supply, earthing arrangement and installation design.
ABB also provides electronic-trip XT6 incoming MCCBs within the Protecta Power range. The EPX-8003-E1-MCCB is the corresponding 800 A three-pole electronic-trip alternative, using ABB Ekip protection technology. The EPX-8003MCCB is specifically the thermal-magnetic version, making it important to distinguish between these devices when specifying protection characteristics and circuit breaker settings.
The ABB Protecta Power 800 A panelboard range includes 8-way, 12-way and 18-way configurations, allowing electrical designers to select the appropriate distribution capacity and number of outgoing circuits. The EPX-8003MCCB is designed for compatible incoming arrangements within this system, subject to the approved panelboard configuration and the correct connection accessories.
For installation within a compatible Protecta Power assembly, ABB identifies the EPX-8003CK as the corresponding 800 A, three-pole XT6 incoming connection kit. This accessory kit provides the incomer support bracket, shrouding and busbar connectivity components required for the designated connection arrangement. The connection kit should be specified separately where required by the approved assembly design.
ABB's published Protecta Power selection information identifies a maximum incoming cable capacity of 2 × 120 mm² for XT6 devices. This is a manufacturer-published cable connection capacity for the relevant arrangement rather than a universal conductor allowance. Actual cable suitability depends on the selected terminals, conductor construction, connection method and installation conditions. Extended front terminals are also available for suitable lug connection applications.
The EPX-8003MCCB is an incoming protective device rather than a complete enclosed distribution panelboard. The finished assembly requires a compatible enclosure, incoming connection kit, outgoing circuit breakers and any additional accessories specified by the electrical design. The installation designer must verify the required operating voltage, short-circuit breaking capacity, prospective fault current, protection coordination and complete assembly compliance before installation and commissioning.
| Product group | Protecta Power Enclosures |
|---|---|
| Series | Protecta Power |
| ABB order code | 1TVS151800S3378 |
| Manufacturer product description | 800A 3P MCCB - XT6 |
| Product type | Moulded case circuit breaker (MCCB) |
| Device category | Incoming circuit protection device |
| Rated current | 800 A |
| Number of poles | 3P (three-pole) |
| Device frame | ABB SACE Tmax XT6 |
| Trip unit technology | Thermal-magnetic (TMA) |
| Overload protection | Thermal trip function |
| Short-circuit protection | Magnetic trip function |
| Operating functionality | Manual switching and automatic protective tripping |
| Compatible distribution system | ABB Protecta Power |
| Intended installation position | Incoming supply section |
| Compatible panelboard rating | 800 A |
| Compatible panelboard configurations | 8-way, 12-way and 18-way, subject to approved assembly compatibility |
| Associated incoming connection kit | EPX-8003CK, subject to approved assembly configuration |
| Published XT6 maximum incoming cable capacity | 2 × 120 mm², subject to terminal and cable compatibility |
| Available terminal accessory | Extended front terminals for suitable lug connections |
| Standard pack contents | Incoming MCCB device |
| System type | Low-voltage electrical power distribution |
| Application | Commercial and industrial three-phase electrical distribution |
| Product classification | 800 A three-pole thermal-magnetic incoming MCCB |
The ABB EPX-8003MCCB is an 800 A three-pole incoming moulded case circuit breaker designed for compatible ABB Protecta Power electrical distribution panelboards. It provides thermal-magnetic overload and short-circuit protection for appropriately designed three-phase incoming electrical circuits.
The EPX-8003MCCB has a rated current of 800 A. It uses the ABB SACE Tmax XT6 circuit breaker platform and is intended for compatible 800 A Protecta Power incoming distribution arrangements. The completed installation must be assessed against its electrical loading, operating conditions and protection requirements.
The EPX-8003MCCB uses a thermal-magnetic (TMA) trip unit. Its thermal element provides overload protection, while its magnetic element provides short-circuit protection. It is distinct from ABB's electronic-trip XT6 incoming MCCB variants, including the EPX-8003-E1-MCCB.
The EPX-8003MCCB is an 800 A three-pole thermal-magnetic XT6 MCCB, while the EPX-8004MCCB is the corresponding 800 A four-pole version. The correct choice depends on the electrical distribution arrangement and whether a fourth pole is required.
The EPX-8003MCCB is listed as an incoming MCCB device. ABB identifies the EPX-8003CK as the corresponding 800 A, three-pole XT6 incoming connection kit, containing the incomer support bracket, shrouding and busbar connectivity components. The connection kit should be specified separately where required by the approved panelboard configuration.
ABB Protecta Power distribution solutions support professional low-voltage electrical installations across commercial, industrial and infrastructure projects. The EPX-8003MCCB combines an 800 A current rating, three-pole ABB SACE Tmax XT6 construction and thermal-magnetic protection technology, providing a coordinated incoming MCCB option for electrical contractors and panel builders assembling compatible high-capacity Protecta Power distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.