Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-6303MCCB (1TVS151800S3376) is a 630 A three-pole Tmax XT5 moulded-case circuit breaker with thermal-magnetic adjustable trip technology, designed for incoming circuit protection in compatible ABB Protecta Power 800 A panelboards.
£1,961.23
The ABB EPX-6303MCCB, manufacturer order code 1TVS151800S3376, is a 630 A three-pole moulded-case circuit breaker (MCCB) based on the ABB Tmax XT5 platform. Designed for compatible ABB Protecta Power 800 A distribution panelboards, it provides an incoming circuit protection and switching solution for professional low-voltage electrical distribution installations.
Officially described as the EPX-6303MCCB 630A 3P MCCB - XT5, this product combines a 630 A rated current, three-pole configuration and thermal-magnetic adjustable (TMA) trip technology. ABB identifies it as a TMA MCCB within its Protecta Power incoming device selection, distinguishing it from electronic-trip MCCB alternatives and non-automatic switch disconnectors.
The ABB Tmax XT5 platform provides a compact moulded-case circuit breaker solution for electrical distribution applications requiring circuit switching and protection against overload and short-circuit conditions. The thermal-magnetic trip arrangement combines thermal overload protection with magnetic short-circuit protection, subject to the device's specified settings and operating characteristics.
As part of the ABB Protecta Power Enclosures product group, the EPX-6303MCCB supports coordinated panelboard assembly using compatible incoming connection kits and enclosure components. It is intended for installation by qualified electrical professionals within a correctly designed and verified distribution system.
Specification note: The exact short-circuit breaking capacity, operational voltage limits, trip adjustment ranges, terminal configuration and physical dimensions must be confirmed against the relevant ABB Tmax XT5 device documentation. The 630 A current rating does not establish the breaker's short-circuit breaking capacity.
The ABB Protecta Power system provides modular low-voltage distribution panelboards for commercial, industrial and infrastructure applications. Its incoming device range includes thermal-magnetic MCCBs, electronic-trip MCCBs and non-automatic switch disconnectors, allowing electrical designers to select the appropriate combination of circuit protection, switching and isolation functions.
The ABB EPX-6303MCCB is identified in the manufacturer's Protecta Power product selection documentation as a 630 A three-pole TMA MCCB based on the XT5 platform. It is part of the incoming device range associated with 800 A Protecta Power panelboards, offering a protective incoming device rated below the panelboard's maximum busbar current.
This distinction is important when designing the distribution assembly. An 800 A panelboard busbar rating describes the designated current-carrying capacity of the panelboard system, while the 630 A MCCB rating identifies the incoming circuit breaker's current rating. The complete assembly must be designed so that its conductors, busbars, terminals and protective devices operate within their respective ratings.
The EPX-6303MCCB uses thermal-magnetic adjustable (TMA) protection. The thermal element responds to sustained overload conditions, while the magnetic element responds to short-circuit conditions. These protective functions distinguish the MCCB from a non-automatic switch disconnector, which is intended for switching and isolation without independent automatic overcurrent tripping.
The device's three-pole configuration is intended for three-phase electrical circuits where three protected poles are required. ABB also offers the EPX-6304MCCB as a four-pole XT5 TMA MCCB alternative. The appropriate pole configuration depends on the distribution system, conductor arrangement, neutral protection requirements and applicable electrical installation regulations.
Where additional electronic protection functionality is required, ABB separately lists the EPX-6303-E1-MCCB as a 630 A three-pole XT5 electronic-trip MCCB. ABB identifies Ekip LS/I electronic trip technology within this incoming device category. The electronic-trip model is a distinct product and should not be confused with the TMA-equipped EPX-6303MCCB.
For integration into a compatible Protecta Power panelboard, ABB lists the EPX-6303CK as the corresponding 630 A three-pole XT5 incoming connection kit. This kit provides the components required for the designated incoming connection arrangement, including an incomer support bracket, shrouding and busbar connectivity components.
The EPX-6303CK is a separately identified accessory and should not be assumed to be included with the EPX-6303MCCB. ABB describes the MCCB pack contents as the incoming device. The appropriate connection kit and any additional terminals or protective accessories must be selected as part of the complete panelboard specification.
ABB's Protecta Power incoming device selection literature identifies a maximum cable capacity of 185 mm² for XT5 devices. This figure is a platform-level selection reference and remains subject to the actual terminal configuration, conductor type and installation instructions. It should not be interpreted as confirmation that every cable or lug arrangement is compatible with the supplied device.
For applications requiring lug-type connections, ABB identifies front extended terminals as an available option. The final termination arrangement must be assessed against conductor sizing, installation clearances, thermal requirements and the relevant manufacturer documentation.
The ABB Protecta Power 800 A panelboard range includes the EPX-PB808 8-way, EPX-PB812 12-way and EPX-PB818 18-way models. These provide different outgoing circuit capacities for electrical distribution installations while retaining the same nominal 800 A busbar rating.
The EPX-6303MCCB can be specified as part of a compatible incoming protection arrangement within this product family. The suitability of the selected MCCB and connection kit must be confirmed for the exact panelboard model, incoming conductor arrangement and complete assembly design.
Incoming circuit breaker selection must account for the design load current, prospective short-circuit current, device breaking capacity, trip settings and protection coordination. Where discrimination or selectivity between incoming and outgoing protective devices is required, the relevant ABB coordination data should be consulted rather than assuming that compatible mechanical installation guarantees the required protective performance.
The EPX-6303MCCB is a protective device, not a complete distribution panelboard. The finished assembly may require a separate Protecta Power enclosure, incoming connection kit, outgoing MCCBs, metering accessories, cable management components and other installation equipment. All components must be selected, installed and verified in accordance with ABB's instructions and the applicable electrical standards.
| Product group | Protecta Power Enclosures |
|---|---|
| Product series | ABB Protecta Power |
| ABB order code | 1TVS151800S3376 |
| Manufacturer description | EPX-6303MCCB 630A 3P MCCB - XT5 |
| ABB catalogue description | TMA MCCB - XT5 |
| Product type | Moulded-case circuit breaker (MCCB) |
| Device category | Incoming protective circuit breaker |
| Rated current | 630 A |
| Number of poles | 3 |
| Pole configuration | Three-pole (3P) |
| Device platform | ABB Tmax XT5 |
| Trip technology | Thermal-magnetic adjustable (TMA) |
| Overload protection | Thermal trip function |
| Short-circuit protection | Magnetic trip function |
| Primary functions | Circuit protection and switching |
| Compatible product family | ABB Protecta Power |
| Associated panelboard range | Protecta Power 800 A panelboards |
| Installation position | Incoming device arrangement |
| Associated incoming connection kit | EPX-6303CK |
| Connection kit designation | 630 A three-pole XT5 connection kit |
| Alternative four-pole TMA MCCB | EPX-6304MCCB |
| Alternative three-pole electronic MCCB | EPX-6303-E1-MCCB |
| Alternative three-pole switch disconnector | EPX-6303SD |
| Higher-rated three-pole MCCB alternative | EPX-8003MCCB |
| XT5 maximum cable capacity stated by ABB | 185 mm², subject to terminal and conductor compatibility |
| Optional termination arrangement | Compatible front extended terminals for cable lug connections |
| Associated 800 A panelboard models | EPX-PB808, EPX-PB812 and EPX-PB818 |
| Pack contents identified by ABB | Incoming device |
| Application | Low-voltage incoming circuit protection and switching |
| Installation requirement | Selection, installation, protection coordination and assembly verification in accordance with ABB documentation and applicable electrical standards |
The ABB EPX-6303MCCB is a 630 A three-pole thermal-magnetic adjustable MCCB based on the ABB Tmax XT5 platform. It is designed as an incoming protective circuit breaker for compatible ABB Protecta Power 800 A panelboards, providing overload and short-circuit protection within the limits of its specified ratings.
The EPX-6303MCCB uses a thermal-magnetic adjustable (TMA) trip unit. Its thermal element provides overload protection, while the magnetic element provides short-circuit protection. The exact adjustment ranges and operating characteristics must be checked against the applicable ABB device documentation.
Both products are 630 A ABB Tmax XT5 TMA moulded-case circuit breakers for compatible Protecta Power incoming arrangements. The EPX-6303MCCB has three poles, while the EPX-6304MCCB has four poles. The correct device depends on the electrical system and required pole configuration.
The corresponding accessory is the ABB EPX-6303CK, designated as a 630 A three-pole XT5 incoming connection kit. ABB lists the kit separately from the MCCB. Its compatibility and inclusion must be confirmed when specifying the complete Protecta Power assembly.
Yes. ABB lists the EPX-6303MCCB among the incoming MCCB options for its 800 A Protecta Power panelboard range. The panelboard's 800 A busbar rating does not change the MCCB's 630 A device rating. The completed installation must be designed and protected according to the selected device and assembly ratings.
The ABB EPX-6303MCCB 630 A Three-Pole MCCB, order code 1TVS151800S3376, provides an ABB Tmax XT5 thermal-magnetic incoming circuit protection solution for compatible Protecta Power 800 A panelboards. Combining a 630 A rating, three-pole configuration and TMA trip technology, it supports professionally designed low-voltage distribution assemblies when installed with the correct connection accessories and coordinated protective equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.