Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-4004MCCB is a 400 A four-pole Tmax XT5 moulded case circuit breaker with adjustable thermal-magnetic protection, designed for incoming circuit protection in compatible ABB Protecta Power low-voltage distribution panelboards.
£1,726.05
The ABB EPX-4004MCCB is a 400 A, 4-pole moulded case circuit breaker (MCCB) from the ABB Tmax XT5 family, specified as an incoming protection device for the ABB Protecta Power low-voltage distribution system. Featuring a thermal-magnetic adjustable (TMA) trip unit, this circuit breaker provides overload and short-circuit protection for suitably designed commercial and industrial electrical installations.
As part of the ABB Protecta Power Enclosures product range, the EPX-4004MCCB provides a coordinated incoming circuit breaker option for compatible distribution panelboards. Its 400 A rated current and four-pole configuration make it suitable for three-phase, four-wire distribution arrangements where four-pole switching and protective device coordination are required.
Identified by ABB order code 1TVS151800S3367, the EPX-4004MCCB combines the established ABB Tmax XT5 circuit breaker platform with the Protecta Power system's modular approach to electrical distribution. It is intended for use with the appropriate ABB incoming connection accessories, helping electrical contractors and panel builders assemble dependable, accessible and professionally configured low-voltage distribution equipment.
Moulded case circuit breakers are essential protective devices in low-voltage electrical distribution systems. They are designed to interrupt electrical current when abnormal conditions, including overloads and short circuits, exceed the protection characteristics established for the circuit.
The ABB EPX-4004MCCB uses the Tmax XT5 frame with a TMA thermal-magnetic trip unit. The thermal protection function responds to sustained overcurrent conditions, helping protect connected conductors and equipment against excessive heating. The magnetic protection function provides a response to high fault currents associated with short-circuit conditions.
The four-pole configuration is suitable for distribution arrangements requiring coordinated switching of three phase conductors and a fourth pole. The treatment of the neutral conductor, including its protection and switching requirements, must be determined from the selected circuit breaker configuration and the electrical system design.
Within the ABB Protecta Power system, the EPX-4004MCCB is identified as an incoming MCCB option. ABB also offers the EPX-4004CK incoming connection kit for the 400 A four-pole XT5 arrangement. The connection kit provides the designated support and busbar connection components and should be specified separately where required by the panelboard assembly.
The complete installation must be designed with appropriate consideration of prospective short-circuit current, conductor sizing, thermal loading, protective device coordination and installation conditions. The selected circuit breaker's breaking capacity and adjustment settings must be verified against the applicable ABB technical documentation before commissioning.
By combining the XT5 circuit breaker platform with a coordinated Protecta Power incoming arrangement, the EPX-4004MCCB supports practical electrical distribution board construction, reliable protection and straightforward maintenance by appropriately qualified personnel.
| Product range | Protecta Power Enclosures |
|---|---|
| Circuit breaker family | ABB Tmax XT |
| Frame designation | XT5 |
| ABB order code | 1TVS151800S3367 |
| Product type | Moulded case circuit breaker (MCCB) |
| Device application | Incoming circuit breaker |
| Rated current | 400 A |
| Number of poles | 4 |
| Pole configuration | Four-pole (4P) |
| Trip unit technology | Thermal-magnetic adjustable (TMA) |
| Overload protection | Thermal trip function |
| Short-circuit protection | Magnetic trip function |
| Switching operation | Manual circuit breaker operation |
| Maximum stated XT5 cable connection capacity | 185 mm², subject to the applicable terminal arrangement |
| Compatible distribution system | ABB Protecta Power |
| Associated incoming connection kit | EPX-4004CK, specified separately |
| Related three-pole MCCB | EPX-4003MCCB |
| Related four-pole electronic MCCB | EPX-4004-E1-MCCB |
| Related four-pole switch disconnector | EPX-4004SD |
| Application | Commercial and industrial low-voltage electrical distribution |
The ABB EPX-4004MCCB is a 400 A four-pole Tmax XT5 moulded case circuit breaker specified for incoming circuit protection in compatible ABB Protecta Power low-voltage distribution panelboards.
The EPX-4004MCCB has a 400 A rated current. The circuit breaker must be selected and configured according to the installation's conductor capacity, operating current and protection requirements.
The EPX-4004MCCB is a four-pole (4P) circuit breaker. ABB identifies the EPX-4003MCCB as the corresponding 400 A three-pole XT5 MCCB.
The EPX-4004MCCB uses a TMA thermal-magnetic adjustable trip unit, providing thermal overload protection and magnetic short-circuit protection. Protection settings must be established according to the electrical installation design.
The EPX-4004MCCB uses the ABB Tmax XT5 moulded case circuit breaker platform and is supplied as a designated incoming device within the ABB Protecta Power product range.
A compatible incoming connection arrangement is required when installing the breaker in a Protecta Power panelboard. ABB lists the EPX-4004CK as the 400 A four-pole XT5 incoming connection kit, which is specified separately.
ABB's Protecta Power product information identifies a maximum XT5 incoming device cable connection capacity of 185 mm². The actual permissible conductor size depends on the fitted terminals, conductor type and installation arrangement. Front extended terminals are available for suitable lug connections.
The EPX-4004MCCB is the 400 A four-pole XT5 thermal-magnetic MCCB, whereas the EPX-4004-E1-MCCB is the corresponding electronic-trip version. ABB specifies Ekip LS/I protection for its standard Protecta Power electronic incoming MCCB range.
Yes. The EPX-4004MCCB is intended for compatible low-voltage electrical distribution assemblies in commercial and industrial applications. Its suitability must be confirmed against the system voltage, prospective fault current, protection coordination and applicable installation requirements.
ABB Protecta Power incoming circuit breakers provide a coordinated approach to low-voltage electrical protection and distribution. The EPX-4004MCCB combines a 400 A rating, four-pole construction and Tmax XT5 thermal-magnetic protection, helping electrical contractors and panel builders specify a dependable incoming MCCB for compatible Protecta Power installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.