Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB EPX-XT4S-E1-1603 is a 160 A three-pole 50 kA moulded case circuit breaker from the Protecta Power Devices range, featuring electronic LS/I overload and selectable short-time or instantaneous short-circuit protection for low-voltage electrical distribution systems.
£1,029.75
The ABB EPX-XT4S-E1-1603 is a high-performance 160 A three-pole moulded case circuit breaker (MCCB) designed to provide dependable overload and short-circuit protection in low-voltage electrical distribution systems. Part of the ABB Protecta Power Devices range, this circuit breaker combines the established ABB SACE Tmax XT4S platform with electronic LS/I protection and a specified 50 kA short-circuit breaking capacity.
Unlike conventional thermal-magnetic circuit breakers, the EPX-XT4S-E1-1603 incorporates an electronic protection trip unit offering long-time overload protection and selectable short-time or instantaneous short-circuit protection functions. The LS/I protection designation identifies a configuration providing long-time protection (L) together with a selectable short-time (S) or instantaneous (I) protection characteristic. This enables electrical engineers to select appropriate protection behaviour according to circuit requirements and the settings supported by the installed trip unit.
With a 160 A rated current, three-pole configuration and 50 kA breaking capacity, this MCCB is suitable for protecting three-phase outgoing feeders, sub-distribution circuits and appropriately rated equipment supplies. Its ABB Tmax XT4S construction supports integration into compatible ABB Protecta Power distribution assemblies, making it a practical solution for electrical contractors, panel builders, consulting engineers and industrial maintenance professionals.
The ABB EPX-XT4S-E1-1603 provides electrical circuit protection using an electronic trip unit designed to monitor current and respond to overload and short-circuit conditions. The long-time protection function (L) is intended to protect electrical conductors and connected equipment against sustained excessive current. By applying an appropriate time-current characteristic, this function helps reduce the risk of overheating while accommodating normal operating conditions within the selected protection settings.
The LS/I protection arrangement provides a choice between short-time and instantaneous short-circuit protection characteristics. When the short-time function (S) is selected, the trip unit can apply an intentional delay according to its supported settings, which may assist protection coordination with downstream devices. When the instantaneous function (I) is selected, the breaker responds to sufficiently high short-circuit currents without intentional time delay. The precise adjustment ranges, operating thresholds and available selection arrangements should be confirmed from the manufacturer's documentation for the supplied electronic trip unit.
The ABB SACE Tmax XT4S platform combines electronic protection technology with a specified 50 kA short-circuit breaking capacity, providing a practical solution for appropriately engineered electrical distribution systems. Its three-pole configuration supports coordinated protection of three-phase circuits, while its compatibility with ABB Protecta Power assemblies helps simplify distribution board design and installation. Electrical engineers should verify the operating voltage, prospective fault current, conductor ratings, protection settings and discrimination requirements before commissioning.
| Product group | Protecta Power Devices |
|---|---|
| Product family | SACE Tmax XT |
| Product series | XT4S |
| Product model | EPX-XT4S-E1-1603 |
| ABB order code | 1SDX255151R1 |
| Product type | Moulded case circuit breaker (MCCB) |
| Rated current (In) | 160 A |
| Number of poles | 3 |
| Specified short-circuit breaking capacity | 50 kA |
| Trip unit technology | Electronic |
| Protection designation | LS/I |
| Long-time protection (L) | Electronic overload protection |
| Short-time protection (S) | Short-circuit protection with time-delay characteristics when selected |
| Instantaneous protection (I) | Short-circuit protection without intentional time delay when selected |
| Protection mode | L with selectable S or I |
| Trip unit adjustment | According to the supplied electronic trip unit configuration |
| Electrical system | Low-voltage AC distribution |
| Phase configuration | Three-phase |
| Switching configuration | Three-pole |
| Operating method | Manual circuit breaker operation |
| Primary protection functions | Overload and short-circuit protection |
| Additional function | Circuit switching and isolation in accordance with manufacturer requirements |
| Product family standard | IEC/EN 60947-2 |
The ABB EPX-XT4S-E1-1603 is a 160 A three-pole electronic moulded case circuit breaker designed to protect low-voltage electrical distribution circuits against overloads and short circuits. It features LS/I protection and is suitable for compatible ABB Protecta Power distribution boards and commercial or industrial electrical panels.
The EPX-XT4S-E1-1603 has a 160 A rated current. This rating should be considered alongside the selected long-time protection settings, conductor current-carrying capacity and installation conditions.
The EPX-XT4S-E1-1603 has a specified 50 kA short-circuit breaking capacity. The applicable rated operating voltage and manufacturer short-circuit performance conditions must be verified against the prospective fault current at the installation location.
LS/I identifies an electronic protection arrangement providing long-time overload protection (L) together with selectable short-time (S) or instantaneous (I) short-circuit protection. The selected function determines the short-circuit response characteristics supported by the trip unit.
LS/I protection provides long-time overload protection with a selectable short-time or instantaneous short-circuit function. LSI protection provides long-time, short-time and instantaneous protection functions within the trip unit configuration. The available settings and operating characteristics should be checked against the manufacturer's technical documentation.
Electronic LS/I trip units provide protection adjustment facilities according to their specific configuration. The available long-time, short-time and instantaneous settings for the EPX-XT4S-E1-1603 should be confirmed from the supplied device and ABB technical documentation before commissioning.
Yes. The EPX-XT4S-E1-1603 has a three-pole configuration designed for coordinated switching and protection of three phase conductors. It is suitable for appropriately designed three-phase low-voltage electrical distribution circuits where neutral switching through the breaker is not required.
XT4N and XT4S identify different short-circuit performance versions within the ABB SACE Tmax XT4 family. The corresponding ABB Protecta Power XT4N devices are specified at 36 kA, while XT4S versions are specified at 50 kA. Selection should be based on the prospective fault current and applicable operating voltage.
Yes. The EPX-XT4S-E1-1603 belongs to the ABB Protecta Power Devices range and is intended for integration into compatible distribution assemblies. The correct XT4 mounting arrangement, electrical connections, enclosure compatibility and electronic protection settings should be verified before installation.
ABB SACE Tmax XT moulded case circuit breakers combine established electrical protection technology with electronic trip functionality and substantial short-circuit interruption capability, supporting dependable commercial and industrial low-voltage distribution system design.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.